Part two of the series will cover sector scan basics and introduction to the data views and displays commonly used in automated UT and phased array. This includes use of the OmniScan MX2 group setup wizards, and setup and configuration of the UT parameters.
There will be a brief review of the previous Webinar that leads into the current topics. This will combine the probe, wedge, and beam forming with use of the sector scan display and optimization of the OmniScan MX2 for manual weld inspection.
Part two of the series will cover sector scan basics and introduction to the data views and displays commonly used in automated UT and phased array. This includes use of the OmniScan MX2 group setup wizards, and setup and configuration of the UT parameters.
Webinar: Phased-Array - Einführung und Prüfung mittels des OmniScan MX2 (Teil 2)Narration Language:English
Olympus is proud to present the latest software release for the OmniScan family of products: MXU V4.1.
This Webinar will include a presentation explaining the various new features and also include live demonstrations of data analysis using OmniPC and setup and acquisition using the OmniScan MX2.
Webinar: Vorteile der neuen Software MXU V4.1 für das OmniScan MX2 und die Software OmniPCNarration Language:English
Showcasing the MX2, Cobra scanner, NDT Setup Builder, and OmniPC for advanced NDT work flow process.
Part two of the series will cover sector scan basics and introduction to the data views and displays commonly used in automated UT and phased array. This includes use of the OmniScan MX2 group setup wizards, and setup and configuration of the UT parameters.
Für Fragen zu Produkten oder Lösungen in diesem Video