Introduction to Phased Array Using the OmniScan MX2 - Part Two

Part two of the series will cover sector scan basics and introduction to the data views and displays commonly used in automated UT and phased array. This includes use of the OmniScan MX2 group setup wizards, and setup and configuration of the UT parameters.

There will be a brief review of the previous Webinar that leads into the current topics. This will combine the probe, wedge, and beam forming with use of the sector scan display and optimization of the OmniScan MX2 for manual weld inspection.

Part two of the series will cover sector scan basics and introduction to the data views and displays commonly used in automated UT and phased array. This includes use of the OmniScan MX2 group setup wizards, and setup and configuration of the UT parameters.

웨비나-옴니스캔 MX2를 사용하는 위상 배열에 대한 소개-2부내레이션 언어 :English

OmniScan MX2 Product Overview

옴니스캔 MX2 제품 개요내레이션 언어 :English사용 가능한 자막 :Chinese, English, French, German, Italian, 日本語, Portuguese, Russian, Spanish

Olympus is proud to present the latest software release for the OmniScan family of products: MXU V4.1. This Webinar will include a presentation explaining the various new features and also include live demonstrations of data analysis using OmniPC and setup and acquisition using the OmniScan MX2.

웨비나-옴니스캔 MX2 및 옴니PC용 새로운 MXU V4.1 소프트웨어의 이점내레이션 언어 :English

Showcasing the MX2, Cobra scanner, NDT Setup Builder, and OmniPC for advanced NDT work flow process.

용접 검사용 옴니스캔 MX2 용접 검사 워크플로내레이션 언어 :English사용 가능한 자막 :Chinese, English, French, German, Italian, 日本語, Portuguese, Russian, Spanish

다음에 대해 자세히 알아보기 :선택옴니스캔 MX2Go

Part two of the series will cover sector scan basics and introduction to the data views and displays commonly used in automated UT and phased array. This includes use of the OmniScan MX2 group setup wizards, and setup and configuration of the UT parameters.

이 비디오에 소개된 제품 또는 솔루션에 대한 질문이 있으십니까?

연락처