NDT Instruments

Aerospace Inspection Solutions

The Bond Testing C-Scan inspection solution is based on the OmniScan MX with ECT or ECA modules. This innovative solution increases the probability of detection of the pitch-catch bond testing method, as it produces live amplitude or phase C-scan images with up to 8 frequencies.

The Doubler Edge Skin Crack Inspection solution utilizes the latest ECA technologies for subsurface detection. The C-scan allows for higher probability of detection and better reproducibility. This solution is a major step forward in terms of reduced inspection time.

The Surface Crack ECA solution proposes an ergonomically-improved version of the SBBR-026 high-resolution ECA probe. This solution detects surface-breaking cracks at a very productive rate, even through paint and thin coatings. This is particularly well-suited for performing fast inspections of aircraft fastener rows.

The Subsurface Crack ECA inspection solution is capable of scanning through the first aircraft layer (skin) to detect cracking present on the 2nd layer, without the need for paint removal. This solution is available in two ECA probe versions (commercial and military aircrafts), both covering at least 64 mm in a single pass.

The Subsurface Corrosion ECA inspection solution performs rapid inspection of large areas for potential corrosion. Available in two probe versions (commercial and military aircrafts), this solution can evaluate the severity of hidden corrosion (defect depth) in an instant, without the need for paint removal.

The high-end FOCUS PX specifications enable stir weld inspection (FSW) inspection to be performed at faster pace than ever before while maintaining unequaled signal quality. The high data throughput capability enables uncompressed A-scan to be retrieved without compromising inspection speed.

Aircraft manufacturers and suppliers are under intense pressure to continually improve the inspection rates of the laminar composite parts used in planes. To meet this challenge, Olympus has developed a line of integrated instrumentation that is especially designed for high-performance composite inspection systems.