UHP

UHP High Intensity Light Source ILP-2

Bright and compact
The ILP-2 light source has been specifically designed for large void inspections. Incorporating the latest UHP lamp technology it is now the brightest, most powerful light source ever produced by Olympus.

Note: Not available for the Small diameter borescopes. In use with the other rigid borescopes, connectable light guides differ depending on the rigid borescope models. Please ask our sales representatives for details.

ILP-2 Voltage 100–240 V AC, 10–15 V DC Power consumption 100 W Dimensions 166 mm × 109 mm × 261 mm (6.5 in. × 4.3 in. × 10.3 in.) Weight 2.9 kg (6.4 lb)

LED

LED Light Source ILD-2

Directly competing with the high power halogen units in terms of brightness, but only using a fraction of the power - this light source provides a freedom of portability that only LED technology can offer. Coupled with the comprehensive range of scope adaptors available, this lightsource is the most versatile we have ever offered.

ILD-2 Power Supply ILD-C or Accessory Desktop PSU Dimensions 81 mm (3.2 in.) long × 38 mm (1.5 in.) diameter Weight 108 g (0.23 lb) Operation time 2.5 hours at full brightness from the ILD-C

LED Light Source ILD-3

The LED light source designed for the MK Modular Mini-scope gives superior brightness at reduced power consumption, and the greatly increased LED life offers lower long term cost and reduced environmental impact. With the use of adaptors it can be fitted to a range of scopes, giving our rigid borescopes or fiberscopes a unique portability.

ILD-3 Power Supply 3VDC single use batteries ILD-C Dimensions 55 mm (2.2 in.) long × 30 mm (1.2 in.) diameter Weight 65 g (0.14 lb) without CR123 battery Operation time 1.5 hours per interchangeable battery or 8 hours at full brightness from the ILD-C

ILD-C

The ILD-C runs the ILD-2 or ILD-3 at their peak current, ensuring their brightest and safest performance, with no drop off over time. It also offers brightness control and prolonged run time from its rechargeable internal battery, negating the need for external power and providing a completely portable light source. The provided desktop power supply will charge the ILD-C at the same time as running the attached ILD-2 or ILD-3, offering continuous use.

ILD-C Power Supply 9 to 19 VDC Power consumption 38 W Max when charging Dimensions 130mm x 90mm x 38mm Weight 650 g

Connecting Scope Adaptors for ILD-2 and ILD-3

A range of adaptors to connect the compact light sources to our various rigid borescopes and fiberscopes.

Light Source ILD-2 ILD-3 Adapted Scopes via Connecting Scope Adaptors Standard Rigid Borescopes Swing-Prism Borescopes Zoom Swing-Prism Borescopes Small Diameter Borescopes Fiberscopes with Olympus Light Guides Engine Borescopes Note: Adaptors connecting ILD-2 to rigid borescopes from other companies are also available. Note: MK Modular Mini-scopes are directly connectable to ILD-3.

Belt Clip and ILD-2 Holster

Available as accessories converting the ILD-C and ILD-2 into a portable light source system for our rigid borescopes and fiberscopes.

Halogen

Halogen Light Source ILK-7/ 7A/ 7B (This item is not available in all areas)

The ILK-7 range of light sources incorporates a 150W tungsten-halogen lamp offering features necessary to meet most industrial needs.

ILK-7 ILK-7A ILK-7B Voltage 100-120 V 50-60 Hz, 115 V 400 Hz 100-240 V 50-60 Hz, 115 V 400 Hz, 11-15V DC 100-240 V 50-60 Hz, 115 V 400 Hz Power consumption 280 W 250 W Dimensions 178 mm × 76 mm × 230 mm (7 in. × 3 in. × 9 in.) Weight 2.3 kg (5 lb)

UV

UV Light Source (Recommended models are available from our sales representatives)

Powerful UV output makes it ideal for fluorescent testing.
A common non-destructive testing (NDT) technique for crack detection uses dye-penetrate. In this method, dye remains in the cracks after cleaning, which is then observed when it fluoresces under ultra-violet light.