Corrosion Inspection Scanners
FlexoFORM
The innovative FlexoFORM scanner makes challenging pipe elbow corrosion inspection easier. The scanner's flexible phased array technology makes it possible to use a single probe to cover the entire range of pipe elbow diameters.
SteerROVER
The SteerROVER is a fully automated, steerable motorized 2-axis scanner capable of performing corrosion mapping in remote locations. When combined with the HydroFORM or the DLA phased array corrosion mapping solutions, it is a powerful tool for C-Scan imaging of remaining wall thickness and mid-wall anomalies.
MapSCANNER
The MapSCANNER is a semiautomated, 2-axis corrosion inspection scanner. When combined with the HydroFORM or Dual Linear Array (DLA) phased array corrosion mapping solutions, it is a powerful, efficient tool for C-Scan imaging of remaining wall thickness and mid-wall anomalies.
MapROVER
The MapROVER is a fully automated, motorized 2-axis corrosion mapping scanner. When combined with the HydroFORM phased array corrosion mapping solution, it is a powerful tool for C-Scan imaging of remaining wall thickness and mid-wall anomalies.
HydroFORM/RexoFORM Scanners
By bringing a semiautomated phased array solution into the corrosion inspection market, Olympus has not only introduced a new technology, but also a new world of possibilities. Say goodbye to unsafe and unreliable motorized rastering of small UT probes; phased array probes cover a larger surface, and can be manually traveled at a safe speed. This solution enables inspectors to be more productive and collect higher resolution data.
ChainSCANNER
The ChainSCANNER provides a manual pipe-inspection solution for pipes between 1.75 to 38 in. OD. The scanner, held by chain links instead of magnetic wheels is well suited for weld or corrosion inspection on different type of materials. UT, TOFD, PA.
GLIDER Scanner
The GLIDER scanner is a 2-axis (X-Y) encoding scanner for the manual inspection of slightly curved or flat composite surfaces. The scanner, held by suction cups is well suited for raster scanning. Technologies: ECA, EC, UT, PA.
VersaMOUSE Scanner
The VersaMOUSE™ is a scanner designed for linear encoded scans with a phased array probe. The integrated indexing button makes it ideal for 2-D mapping applications such as CFRP flat panel and corrosion inspections. The VersaMOUSE can perform an encoded one-line scan, followed by indexing of the position in the perpendicular direction. Another one-line scan can then be performed and juxtaposed to the previous scan. This process is repeated to produce a complete 2D map of the area of interest.
Mini-Wheel Encoder
The mini-Wheel Encoder is used for the positioning and dimensioning of defects in the scan axis. It can synchronize data acquisition with probe movement. It is also waterproof and compatible with Olympus standard PA wedges.