TFB - BefestigtDie Magnetflusssonden sind mit hochgesättigtem Magnetfluss optimiert. Auswechselbare Verschleißringe verbessern die Verschleißbeständigkeit. Diese Sonden eignen sich zur Prüfung von Kühlluftrohren (mit Aluminiumrippen) und zum Prüfen von Rissen in Umfangsrichtung. | Features
|
Die unten aufgeführten Sonden sind immer auf Lager, um eine schnelle Lieferung zu ermöglichen. Wenn die von Ihnen benötigte Sonde nicht angegeben ist, finden Sie in der Spalte „Alternativer Sondendurchmesser“ im Sondenkatalog für Rohrprüfungen einen alternativen Sondendurchmesser.
Teilenummer | Bestellnummer | Durchmesser | |
mm | Zoll | ||
TFB-120-N20 | U8280231 | 12 | 0,472 |
TFB-132-N20 | U8280135 | 13,2 | 0,520 |
TFB-170-N20 | U8280137 | 17 | 0,669 |
TFB-179-N20 | U8280111 | 17,9 | 0,705 |
TFB-187-N20 | U8280246 | 18,7 | 0,736 |
TFB-198-N20 | U8280361 | 19,8 | 0,780 |
TFB-242-N20 | U8280099 | 24,2 | 0,953 |
Zur Ermittlung der Teilenummer wird folgende Nomenklatur und Tabelle verwendet.
Sondentyp | Sondendurchmesser (mm in Teilenummer verwenden) | Kabellänge | ||
Teilenummer Durchmesser | mm ** | Zoll.** | ||
TFB: Sonde für magnetischen Streufluss | 120* | 12,0 | 0,472 |
20 m
30 m |
132* | 13,2 | 0,520 | ||
161* | 16,1 | 0,634 | ||
170* | 17,0 | 0,669 | ||
179 | 17,9 | 0,705 | ||
187 | 18,7 | 0,736 | ||
198 | 19,8 | 0,780 | ||
229 | 22,9 | 0,902 | ||
242 | 24,2 | 0,953 | ||
283 | 28,3 | 1,114 | ||
296 | 29,6 | 1,165 |
* Sonden mit kleinerem Durchmesser reagieren weniger empfindlich auf äußere Fehler, da der Sondenkernabschnitt viel kleiner als der Rohrabschnitt ist. Die Empfindlichkeit gegenüber Fehlern im Inneren ist jedoch immer noch sehr hoch.
** Diese Sonden haben einen Gesamtdurchmesser, der etwas größer als die Teilenummernreferenz ist.
Warnung: Bei verschmutzten Rohren ist möglicherweise eine kleinere Sonde für die Prüfung erforderlich. Olympus übernimmt keine Haftung, wenn Sie eine Sonde auswählen, die nicht mit Ihrer Anwendung kompatibel ist. Für Unterstützung kontaktieren Sie Olympus.
Beispiel: Für ein 1-Zoll-Rohr mit einer Wandstärke von 2,41 mm ist die TFB-187-N20 Sonde erforderlich. Diese Sonde hat einen Gesamtdurchmesser von 19,4 mm und austauschbare Halbringe aus gehärtetem Stahl.
Sonden-ID-Durchmesser - mm (Zoll) | ||||||||||||||||||||
Rohrabmessungen | 12.0 (0.472) | 13.2 (0.520) | 16.1 (0.634) | 17.0 (0.669) | 17.9 (0.705) | 18.7 (0.736) | 19.8 (0.780) | 22.9 (0.902) | 24.2 (0.953) | 28.3 (1.114) | 29.6 (1.165) | |||||||||
AD
mm (Zoll) | BWG |
WT
mm (Zoll) | Gesamtdurchmesser (einschließlich Verschleißsystem) - mm (Zoll) | |||||||||||||||||
12,5
12,8 bis 0,49 (0,50 bis 0,51) |
13,7
14,0 bis 0,54 (0,55 bis 0,51) |
16,6
16,9 bis 0,65 (0,66 bis 0,51) |
18
(0.71) |
18,7
(0.73) |
19,4
(0.77) |
20,5
(0.81) |
23,8
(0.94) |
25,1
(0.99) |
29,2
(1.15) |
30,5
(1.20) | ||||||||||
19 (0.75) | 16 | 1.65 (0.065) | ● | |||||||||||||||||
14 | 2.11 (0.083) | ● | ||||||||||||||||||
13 | 2.41 (0.095) | ● | ● | |||||||||||||||||
12 | 2.77 (0.109) | ● | ||||||||||||||||||
25.4 (1.0) | 16 | 1.65 (0.065) | ● | |||||||||||||||||
15 | 1.83 (0.072) | ● | ||||||||||||||||||
14 | 2.11 (0.083) | ● | ||||||||||||||||||
13 | 2.41 (0.095) | ● | ● | |||||||||||||||||
12 | 2.77 (0.109) | ● | ||||||||||||||||||
11 | 3.05 (0.12) | ● | ||||||||||||||||||
10 | 3.40 (0.134) | ● | ● | |||||||||||||||||
9 | 3.76 (0.148) | ● | ||||||||||||||||||
31.75 (1.25) | 13 | 2.41 (0.095) | ● | |||||||||||||||||
12 | 2.77 (0.109) | ● | ||||||||||||||||||
11 | 3.05 (0.12) | ● | ||||||||||||||||||
10 | 3.40 (0.134) | ● | ||||||||||||||||||
38.1 (1.5) | 12 | 2.77 (0.109) | ● | |||||||||||||||||
11 | 3.05 (0.12) | ● | ||||||||||||||||||
10 | 3.40 (0.134) | ● | ||||||||||||||||||
9 | 3.76 (0.148) | ● | ||||||||||||||||||
Verschleißsystem | Hartmetall-Verschleißstifte (fixiert) | Halbringe aus gehärtetem Stahl (austauschbar) |
● Dies ist die empfohlene Sondengröße.
● Diese Größe kann verwendet werden, wenn Sie nicht die empfohlene Größe haben.
You are being redirected to our local site.