Fast HTHA Scanning—Zero-Degree DLA Probes (REX1)

• 10 MHz dual 64-element arrays
• Beam width coverage up to 30 mm (1.18 in.)
• Adjustable stabilization and carbide wear protection system fits to the surfaces of pipes as small as 4 inches (101.6 mm) OD
• Integrated wedges covering thicknesses from 4 mm to 95 mm (0.16 in. to 3.74 in.)
• Provides clear C-scan images when used with an encoder or scanner

Specifications

Wedges for the A28 Probe

The angle beam wedge series is optimized for weld volume and heat-affected zone inspection. The wedge angle is set to generate L-waves at a 65-degree nominal incident angle in steel. They feature a roof angle calculated for each AOD diameter.

SA28 wedges are avaliable in two focus depths to cover a wide range of thicknesses:

• SA28-DN65L-FD25: Optimized for part thicknesses ranging from 4 mm to 45 mm
• SA28-DN65L-FD60: Optimized for part thicknesses ranging from 45 mm to 95 mm