Evident LogoOlympus Logo
Assistenza clienti

Installation to DP73 response improvement program

Before installation

Please be careful to the following when you install.

  • The software cannot be installed unless the user account is registered as "Computer Administrator". If the user account is registered as a "Restricted Account", change it to the "Computer Administrator" account. (For the user account registration, refer to the instruction manual for your PC.)
  • Exit out of all application running before you update the software.
  • Disable all setting for screen saver and sleep mode before installation. Also, please pay attention not to go standby mode during installation in your PC.


Installation of Update program

(1) Run the downloaded file "DP73_LivePerformance_6-1-4-2_64bit.exe".

(2) Click "Run", when the following dialogue appears.

(3) Select language and click "OK".

(4) Wait until the (5) dialogue is displayed.

(5) Select application and click "Next".

(6) Click "Yes", when the following dialogue appears.

(7) Wait until the (8) dialogue is displayed.

(8) When the following dialogue appears, please click "Finish". That's all for installation.

(9) Verify the installation finally. Start OLYMPUS Stream and verify API version is 6.1.4.2 in the acquisition setting or the device setting.

Sorry, this page is not available in your country
Let us know what you're looking for by filling out the form below.
Sorry, this page is not available in your country