Thickness and Flaw Inspection Solutions

Accupath & Short Approach Wedges

Home/ Products/ Transducers and Probes/ Single and Dual Element Transducers / Angle Beam

Accupath Wedges

Small wedge footprint
Pointed toe design allows transducer rotation even when the nose is touching a weld crown
Special wedge design for use with 10 MHz transducer

*Accupath and Surface Wave Wedge Dimensions (Miniature Screw-in)**
Fits Nominal Element Size (in inches)
		0.5					0.375					0.25
		(A)	(B)	(C)	(D)		(A)	(B)	(C)	(D)		(A)	(B)	(C)	(D)
30°		0.72	1.22	0.77	0.54		0.62	1.03	1.03	0.42		0.49	0.66	0.45	0.23
45°		0.70	1.03	0.73	0.38		0.60	0.85	0.61	0.32		0.43	0.61	0.43	0.235
60°		0.74	1.19	0.73	0.45		0.67	1.00	0.61	0.367		0.48	0.71	0.43	0.268
70°		0.79	1.34	0.73	0.50		0.69	1.12	0.61	0.406		0.50	0.81	0.43	0.305
90°		1.25	1.84	0.77	-		1.00	1.48	1.48	-		0.83	1.13	0.45	-

Miniature Screw-In Wedges for 10 MHz Transducers

Nominal Element Size		Wedge Part Numbers
inches	mm	Accupath*	Surface Wave 90°
0.50	13	ABWM-5ST-X°	ABWML-5ST-90°
0.375	10	ABWM-7ST-X°	ABWML-7ST-90°
0.25	6	ABWM-4ST-X°	ABWML-4ST-90°

*Accupath Wedges are available in standard refracted shear wave angles of 30°, 45°, 60°, and 70° in steel at 10 MHz.

Short Approach Wedges

Smallest footprint
Short approach distance allows for inspection closest to the weld crown

Short Approach Wedge Dimensions (Miniature Screw-in)
Fits Nominal Element Size (in inches)
	0.5				0.375				0.25
	(A)	(B)	(C)	(D)	(A)	(B)	(C)	(D)	(A)	(B)	(C)	(D)
45°	0.70	1.03	0.73	0.38	0.60	0.85	0.61	0.32	0.43	0.61	0.43	0.235
60°	0.74	1.19	0.73	0.45	0.67	1.00	0.61	0.367	0.48	0.71	0.43	0.268
70°	0.79	1.34	0.73	0.50	0.69	1.12	0.61	0.406	0.50	0.81	0.43	0.305

Sorry, this page is not available in your country

Let us know what you're looking for by filling out the form below.

Sorry, this page is not available in your country