Meet High Productivity Demands with Powerful PA Instrumentation
Evident offers a complete advanced phased array (PA) integration solution that meets the requirements of your most demanding customers. The solution includes the QuickScan iX™ PA+ data acquisition unit, a high-performance phased array device designed for flexible integration, and a versatile software suite offering a wide range of options for system setup, acquisition, and data management to meet various industry needs.
QuickScan iX PA Instrument
High-Quality PA Results
The QuickScan iX PA+ data acquisition unit uses advanced Evident phased array technology offering an excellent signal-to-noise ratio.
Up to
12 dB
SNR improvements
Up to
4
apertures in parallel per instrument
Versatile and Expandable to Grow with Your Inspection Requirements
One QS iX PA+ unit offers the capacity to use up to 4 phased array apertures in parallel. You can expand your inspection capacity even further with a configuration that uses multiple QuickScan iX PA+ units in parallel. Ask your Evident representative about the configuration possibilities.
Up to
25 kHZ
acquisition rate
Up to
90 MB/s
data throughput
Specifications
Phased Array Channels
256
Number of Pulsers
64:256
4×16 or 2×32 or 1×64
Nb. of Rx in ||
2 per apertures of 32
Acquisition Speed (PRF)
Up to 25 kHz
Rectification
FW, HW+, HW−, and RF
Filtering
Digital band-pass, high-pass, and low-pass filters
Voltage
PA: in Ω 50 | 90 V (Bipolar)
Gain
0–80 dB
Pulse Width
30 ns to 1000 ns (steps of 5 ns)
Bandwidth (−3 dB)
2.5 MHz to 21.8 MHz
Number of Beams
Up to 1024
Number of Gates
3 detection gates + 1 for synchronization
Network Interface
1000BASE-T x-coded 1 GB
Size (W × H × D)
295 mm × 133 mm × 473 mm
Weight
13.4 kg (29.5 lb)
IP rating
IP55
Total Peak Power Consumption
170 W
DC Input
24 V to 36 V
Temperature Range
Operating: 0 °C to 45 °C (32 °F to 113 °F),
Storage: -20 °C to 70 °C (-4 °F to 158 °F)
Digital I/O & Encoders
8 digital inputs (programmable)
8 digital outputs (programmable)
2 encoder inputs (incremental, A and B phase)
Bar inspection systems use advanced technologies, such as ultrasonic phased array, eddy current array, and X-ray fluorescence spectroscopy, to inspect the full volume and surface of round or square bars and pipes.
Lo sentimos, la página solicitada no se encuentra disponible en su país.
Let us know what you're looking for by filling out the form below.