Flaw Detectors

Rotating Scanner Probes

Quote Request

Questions?

Rotating Scanner Probe

Bolt Hole Probes for Olympus Rotating Scanners

Rotating scanner probes are used with mechanical devices for automatically rotating the probe in the hole. Probes utilize reflection differential coils with operating frequencies of 100 kHz to 2 MHz are typical. They bear close tolerances and are highly reliable.

Overview
Part numbers

	Fischer Connector					LEMO Connector
	SPO-5965*		SUB Series*			SPO-3564**
Range of Hole Size mm (in.)	Part Number	Item Number	Part Number	Item Number	Working Length mm (in.)	Part Number	Item Number	Working Length mm (in.)
3.2 to 3.9 (0.125 to 0.156)	9230531	U8610280	SUB-8-10	U8600494	44.0 (1.75)	9230784	U8614109	28.0 (1.10)
3.9 to 4.7 (0.156 to 0.187)	9230061	U8610267	SUB-10-12	U8600481	44.0 (1.75)	9230078	U8614059	28.0 (1.10)
4.7 to 5.5 (0.187 to 0.218)	9219979	U8610231	SUB12-14	U8600482	44.0 (1.75)	9217153	U8614091	28.0 (1.10)
5.5 to 6.5 (0.218 to 0.250)	9219980	U8610232	SUB-14-16	U8600483	50.8 (2.00)	9217154	U8614092	28.0 (1.10)
6.5 to 7.1 (0.250 to 0.281)	9219981	U8610233	SUB-16-18	U8600484	50.8 (2.00)	9217155	U8614093	28.0 (1.10)
7.1 to 7.9 (0.281 to 0.312)	9219982	U8610234	SUB-18-20	U8600485	50.8 (2.00)	9217156	U8614094	38.0 (1.50)
7.9 to 9.5 (0.312 to 0.375)	9219983	U8610235	SUB-20-24	U8600486	50.8 (2.00)	9217157	U8614095	38.0 (1.50)
9.5 to 11.0 (0.375 to 0.437)	9219978	U8610230	SUB-24-28	U8600487	50.8 (2.00)	9217158	U8614096	38.0 (1.50)
11.0 to 12.7 (0.437 to 0.500)	9219984	U8610236	SUB-28-32	U8600488	50.8 (2.00)	9217159	U8614097	38.0 (1.50)
12.7 to 14.3 (0.500 to 0.562)	9219985	U8610237	SUB-32-36	U8600489	50.8 (2.00)	9217160	U8614098	38.0 (1.50)
14.3 to 15.9 (0.562 to 0.625)	9230156	U8610252	SUB-36-40	U8600490	50.8 (2.00)	9218785	U8614099	38.0 (1.50)
15.9 to 17.4 (0.625 to 0.687)	9230157	U8610253	SUB-40-44	U8600491	50.8 (2.00)	9218786	U8614100	38.0 (1.50)
17.4 to 19.0 (0.687 to 0.750)	9230158	U8610254	SUB-44-48	U8600492	50.8 (2.00)	9218787	U8614101	38.0 (1.50)
* For use with MiniMite Fischer, Spitfire, and other "Universal" scanners. ** For use with MiniMite LEMO, RA19, and RA2000 scanners.

Rotating scanner probes are available in a variety of diameters and styles to work with Olympus rotating scanners. The SPO-5965 and SUB series probes are fitted with a 4-pin Fischer connector while the SPO-3564 series incorporate the 4-pin LEMO connector style.

The probes listed on this page are designed to be rugged and are nearly indestructible when dropped or expanded. Their probe tips have flexible plastics tips that automatically compress to their original size after being expanded to fit inside larger bolt holes (see chart below for hole size ranges). The benefit of these flexible tips is that no additional manual adjustment has to be made to the probe after a bolt hole has been reamed to a larger diameter.

Rotating scanner probes use a reflection differential type coil operating in the 200 kHz to 3 MHz range. They are suitable for aluminum structures as well as low conductivity materials.

Loading...