Evident LogoOlympus Logo

Przenośne defektoskopy do badań prądami wirowymi

Portable eddy current (EC) flaw detectors inspect metallic parts and perform highly reliable and advanced flaw detection of surface and near-surface defects. Olympus offers portable eddy current equipment to meet a broad range of applications, including the detection of surface or near-surface defects, and the inspection of bolt holes. Our eddy current testing equipment includes the latest advances in eddy current flaw detection for precise use in various inspection applications. In an eddy current inspection job, you need equipment you can trust. Our eddy current flaw detectors are built with endurance in mind and are field-proven to withstand even the most demanding conditions.

Talk to the Experts

Eddy Current Flaw Detectors

NORTEC 600

The new NORTEC 600™ incorporates the latest advancements in high-performance eddy current flaw detection into a compact, durable unit. With its vibrant 5.7-inch VGA color display and true full-screen mode, the NORTEC 600 produces user-selectable, high-contrast eddy current signals.

Probes for Tube Inspection

These probes for tube inspection are lightweight but solidly constructed and use eddy current, remote field, magnetic flux leakage, and IRIS ultrasound technologies. These probes are used for ferromagnetic or non-ferromagnetic tube inspection applications.

OmniScan MX ECA/ECT

The OmniScan™ MX ECA/ECT flaw detector is used to perform eddy current array testing inspections. The test configuration supports 32 sensor coils (up to 64 with an external multiplexer) working in bridge or transmit-receive mode. The operating frequency ranges from 20 Hz to 6 MHz with the option of using multiple frequencies in the same acquisition.

Bolthole Scanners

Rotating Bolthole Scanners

Our high-performance eddy current bolt hole scanners are available for use with NORTEC eddy current flaw detectors. Features include speed ranges from 600 to 3000 rpm, frequency ranges from 100 Hz to 6 MHz, multiple connector types, and multiple probe types.

Eddy Current Testing Equipment FAQs

How does eddy current measurement work?

Eddy current testing is a nondestructive testing (NDT) method that can be used for various inspection and detection applications. Eddy current inspections work using an electromagnetic field to measure the response from a material. Eddy current testing equipment generates magnetic fields, which induce a current that flows in a test piece (e.g., a conductor such as a coil). This influences the magnetic field, as well as the magnitude and phase of voltage in the coil. Any changes in conductivity, such as defects or thickness differences, can affect the resulting eddy current. This technology can then be used to measure distance or to detect flaws in conducting materials such as corrosion, erosion, wear, pitting, baffle cuts, wall loss, and cracks.

Eddy Current Flaw Detector Resources

Inspecting Carbon Steel Welds with the NORTEC 600 Flaw Detector

This video discusses the inspection of carbon steel welds, showing how the NORTEC 600 eddy current flaw detector can streamline your inspection process.

Basic Aerospace Eddy Current Array Setup Using the OmniScan™ MX Flaw Detector

This video shows how to start an eddy current array setup from scratch to get a C-scan image.

OmniScan MX: Basic Aerospace Eddy Current Array set up using the OmniScan MX

The purpose is to show how to start an ECA set up from scratch to get an C-scan image.

OmniScan MX: New Developments and Upgrades

The latest developments and upgrades to the OmniScan MX platform, with an emphasis on the Eddy Current Array module and Bond Testing C-scan.

Webinar - Stress Corrosion Cracking Inspection using Eddy Current Array

This Webinar includes an overview of the exciting new Eddy Current Array solution for the detection of stress corrosion cracking in refinery process piping using the new user-friendly MXE 3.0 software of the OmniScan MX flaw detector.

Webinar - Bond Testing C-scan - Inspection of Composite Honeycomb Structures using the OmniScan MX

This Webinar includes an introduction and overview of the innovative new Bond testing C-scan solution for the inspection of composite honeycomb structure using the OmniScan MX flaw detector. Attendees will learn about the powerful benefits of this solution and its advantages compared to existing techniques of testing composite materials. Attendees will learn why bond testing is possible with an eddy-current based instrument and will be shown the different scanning options featuring a new hand scanner. Attendees will see a live demonstration of the new MXB software’s simplicity and dynamic inspection capabilities that is dedicated to Bond Testing.  You will learn about pitch-catch bond testing method, multiple frequency scanning, amplitude and phase displays, system calibration, data interpretation and archiving.

Sorry, this page is not available in your country
Let us know what you're looking for by filling out the form below.
Sorry, this page is not available in your country