Evident LogoOlympus Logo

Thickness and Flaw Inspection Solutions
Specification

Standard Product Range Diameter 60.3 mm to 508 mm OD (2.37 in. to 20 in. OD)
Wall Thickness 4 mm to 50.8 m (0.157 in to 2 in.)
Speed Conventional UT: 4 mm/s to 60 mm/s Phased array: 10 mm/s to 120 mm/s
Coverage 100% coverage with untested length starting at 5 mm
EOT inspection length can be configured according to requirements
Data Presentation Real-Time Inspection Results C-scan, A-scan, B-scan, strip charts, and alarms
Inspection Modes Typical Inspection Modes Longitudinal, transverse, and lamination defects
Detection Capabilities for Typical Reference Defects Repeatability L, T notches: <2.5 dB, TDH 3.2 mm (0.13 in.) and TDH 1.6 mm (0.06 in.): <3 dbB, FBH 6.35 mm (0.25 in.): <4 dB
Standards ISO and API
Reporting and Data Storage Report Types Inspection, calibration, and calibration-check user-configurable reports
Storage Real-time database inspection data storage
Sorry, this page is not available in your country

Let us know what you're looking for by filling out the form below.

Sorry, this page is not available in your country