IPLEX MX II

IPLEX MX II Industrial Videoscopes Instructions

English - 2.9 MB 简体中文 - 3.9 MB 日本語 - 3.4 MB

IPLEX MX II Industrial Videoscopes

English - 2.0 MB Deutsch - 0.9 MB français - 1.6 MB Español - 1.5 MB 简体中文 - 1.8 MB 日本語 - 1.7 MB čeština - 1.0 MB magyar - 1.0 MB italiano - 0.9 MB 한국어 - 1.9 MB polski - 1.7 MB português - 1.5 MB русский - 1.0 MB 繁体中文 - 1.1 MB

Lithium-ion Battery/ Battery charger

NC2040OL24
CH5000C (USA Type)
CH5000X (European Type)
The battery provides two hours of running time.

Side View Mirror Adapter Specifications ^*1

You can change the direction of view by mounting the side viewing tip adaptor.

Model No.	AT50S-IV76X2
Outer diameter^*2	Ø7.4 mm (0.291 in.)
Direction of view	Side
Field of view	50°
Depth of field^*3	5 to 1,000 mm

*1. Available on IV8630M only. Images other than the mirror image are visible when the adaptor is mounted on the scope. Usable under water, but remove the adaptor immediately to clean and dry it. Otherwise, corrosion and expansion may make it impossible to remove or mount the adaptor.

*2. The adaptor can be inserted into a Ø7.4 mm hole when it is mounted on the scope.

*3. Indicates the optimal focal distance.

High Magnification Adapter

MAJ-1566
Provides approx. 20X higher magnification on the IPLEX MX II monitor by being locked onto the IPLEX MX II.
Note: Exclusively for use on IV8630M.

Side View Rigid Sleeve

MAJ-1730 (for 4.4 mm)
MAJ-1731 (for 6.0 mm)
Each set consists of three rigid sleeves of 250mm, 340mm and 450mm lengths.

Rigid Sleeve Sets

MAJ-1281 (for 4.4 mm insertion tube)
MAJ-1253 (for 6.0 mm insertion tube)
Allows the controller to be affixed to a tripod, making it useful for prolonged inspections.

Back to top

SCOPE VARIATION
Model No.		IV8415M	IV8430M	IV8630M
Insertion tube	Scope Diameter^*1	φ4.4 mm (0.173 in.)		φ6.0 mm (0.236 in.)
	Scope Length	1.5 m (4.9 ft)	3.0 m (9.8 ft)	3.0 m (9.8 ft)
	Distal end^*2	14.85 mm (0.585 in.)		21.34 mm (0.840 in.)
	Exterior	High durability tungsten braid
	Tube Flexibility	Tough Tapered Flex™ tube with flexibility gradually increasing toward the distal end.
Optics	Direction of view	Forward		Forward. Changeable to side view by using the side view mirror adaptor.
	Field of view	100º		120º
	Depth of field^*3	12 to 50 mm		18 to 1,000 mm
	Illumination method	LED
Articulation section	Articulation angle	UP/DOWN/RIGHT/LEFT 120º
	Articulation mechanics	TrueFeel™ scope tip articulation with electronic power-assisted, manual articulation.
System Weight (with battery)		2.5kg (5.5lb)	2.6kg (5.7lb)

*1. The insertion tube can be inserted into a ø4.4 mm or ø6.0 mm hole.
*2. Indicates the length of the rigid portion at the scope's distal end.
*3. Indicates the optimal focal distance.

Handheld controller
Quick access buttons	The following features have dedicated quick access buttons, levers or joysticks on the hand control unit: Brightness, Zoom, Freeze Image, Record Still, Articulation Control, Articulation Lock, Menu Access, Quick Last Image Recall.
Dimensions	230 (W) mm x 100 (D) mm x 200 (H) mm (9.1in. x 3.9 in. x 7.9 in.)
Weight	Approx. 500 g (1.1 lb)

Main Unit
Dimensions Maximum Dimension	227 (W) mm x 189 (D) mm x 64 (H) mm (8.9 in. x 7.4 in. x 2.5 in.) 239 (W) mm x 215 (D) mm x 99 (H) mm (9.4 in. x 8.5 in. x 3.9 in.)
LCD monitor	6.5-inch anti-reflective LCD
Power Supply	Battery: 10.8V nominal, Over 120-minute operating time AC power: 100 V to 240V, 50/60 Hz (with supplied AC adapter)
Output Connector	RCA composite video output
USB Connector	A connector, Ver. 2.0 standards

Software Controls
Image Controls	3 step digital zoom, 8 step digital brightness control
Display Text Options	30-character title display

Recording Management Functions
Recording Media	USB flash drive (1GB standard, compatible with recommended USB flash device).
Overlay	30-character with date and time.
Still image Recording	Resolution	NTSC: H640 x V480 (Pixel), PAL: H768 x V576 (Pixel)
	Recording Format	Compressed JPEG format (Exif 2 compliant)
	Size of a Single Image	Approx. 300 KB

Operating Environment
Operating Temperature	Insertion Tube	In air: -25º to 80ºC (-13º to 176ºF)
	Insertion Tube	In water: 10º to 30ºC (50º to 86ºF)
	Other parts than above	In air: -10 to 40ºC (14º to 104ºF)
Relative Humidity	All parts	15 to 90%
Liquid Resistance	All parts	Operable when exposed to machine oil, light oil or 5% saline solution.
Waterproofing	Insertion Tube	Operable underwater up to a water pressure equivalent to a depth of 3.0 m.
Waterproofing	Other parts than above	Neither water proof nor drip-proof.

With a simple design dedicated for direct-view inspections, the industrial videoscope IPLEX MX II is a basic inspection tool for entry level users.

Reliability
Image Quality
Ease of Use

Reliability

Tough environments? The IPLEX MX II is built to deliver every time

Decades of experience plus quality control

At the core of the IPLEX MX II are decades of Olympus endoscope experience and strict quality control. The IPLEX MX II shrugs off tough environmental conditions, letting you inspect with confidence in tight areas where bumps can occur.

Tough insertion tube ... easy scope insertability

The improved insertion tube of the IPLEX MX II has four layers, combining rugged durability and unsurpassed scope insertability. The tube is both exceptionally abrasion resistant 2X higher than the previous MX generation and highly crush resistant. The unique IPLEX Tapered Flex^TM feature provides graduated flexibility for easy scope insertability.

Tough steel coil
A crush resistant steel coil layer makes the insertion tube more durable.

Resin tube with special processing
Tapered Flex^TM tube features graduated flexibility for easy scope manoeuverability and navigation

High-density braided exterior
High density outer braid for maximum wear resistance and durability.

No light guide
Only contains articulation wires and electronics. With LED illumination at the scope tip, fibre optic bundles are not necessary.

Image Quality

Even the smallest defects can be seen with superb image quality

Large monitor for detecting small defects

The IPLEX MX II is equipped with a large 6.5 in. monitor that reveals small defects clearly and accurately. The monitor features a low-reflection display and produces vivid images both indoors and outdoors.

Exceptionally bright LED illumination

The LED illumination system of the IPLEX MX II is 4X brighter than the conventional model in maximum, delivering brilliant illumination to deep and dark areas that require inspection. The scope tip's LED array ensures that objects are evenly illuminated.

Ease of Use

The IPLEX MX II provides simple yet accurate operation for every user level

TrueFeel^TM controller for precise articulation and quick menu access

You can intuitively manipulate the IPLEX MX II with menu buttons efficiently organised on the handheld controller. TrueFeel scope tip articulation enables power-assisted articulation and precise control. Just a light touch of the joystick moves the scope tip in any direction.

Versatile system design offers choice of operation

The compact IPLEX MX II weighs just 2.5 kg and is more than 30% smaller than a conventional model. It's easy to transport and easy to operate. Just turn it on and you're ready to go! This versatile design offers a choice of operation. You can operate the IPLEX MX II either mounted on your body or placed wherever else it is convenient, and the handheld controller can be manipulated either independently or attached to the main unit.

Easy access to multiple object types

The IPLEX MX II provides insertion tubes in 4.4 mm and 6.0 mm diameters to cover various kinds of inspections. Both tubes have a short distal end and small bending radius for effortless insertion and convenient access to confined spaces.

Efficient recording and post-inspection work

The IPLEX MX II records high-quality JPEG still images to a USB flash device with a single click. You can make reports by connecting the PC-friendly recording medium to your computer. Title can be easily saved on an image in order to assure the streamlined post-inspection work.

Back to top

Industry Solutions

Product Name

Videoscopes, Borescopes

Lithium-ion Battery/ Battery charger

Side View Mirror Adapter Specifications ^*1

High Magnification Adapter

Side View Rigid Sleeve

Rigid Sleeve Sets

Reliability

Decades of experience plus quality control

Tough insertion tube ... easy scope insertability

Image Quality

Large monitor for detecting small defects

Exceptionally bright LED illumination

Ease of Use

TrueFeel^TM controller for precise articulation and quick menu access

Versatile system design offers choice of operation

Easy access to multiple object types

Efficient recording and post-inspection work

Advanced NDT Solutions

Flaw Detectors

Integrated Inspection Systems

Thickness Gages

Videoscopes, Borescopes

High Speed Video Cameras

Microscope Solutions

Optical Metrology

XRF and XRD Analyzers

Videoscopes, Borescopes

IPLEX MX II

Lithium-ion Battery/ Battery charger

Side View Mirror Adapter Specifications *1

High Magnification Adapter

Side View Rigid Sleeve

Rigid Sleeve Sets

﻿Reliability

Decades of experience plus quality control

Tough insertion tube ... easy scope insertability

﻿Image Quality

Large monitor for detecting small defects

Exceptionally bright LED illumination

﻿Ease of Use

TrueFeelTM controller for precise articulation and quick menu access

Versatile system design offers choice of operation

Easy access to multiple object types

Efficient recording and post-inspection work

Side View Mirror Adapter Specifications ^*1

Reliability

Image Quality

Ease of Use

TrueFeel^TM controller for precise articulation and quick menu access