Measurements |
Mode 1:
|
Time interval between excitation pulse and first backwall echo, using contact transducers.
| |
Mode 2:
|
Time interval between the first interface echo after the excitation pulse and the first backwall echo, using delay line or immersion transducers.
| |
Mode 3:
|
Time interval between successive backwall echoes following the first interface echo after the excitation pulse, using delay line or immersion transducers.
|
Thickness Measurement Range:
|
Steel:
|
0.006 - 20.000 inches
(0.150 - 508.00 mm)†
| |
Plastic:
|
0.003 - 2.0000 inches
(0.08 -50.00 mm)†
|
Thickness range depends on material, transducer, surface condition,temperature, and SETUP selected.
Barrier Layer Plastic Mode:
Only for Mode 1 and 2, Thickness Range
0.004 - 0.020 inches (0.100 - 0.50 mm).*
Multilayer Measurement Mode:
Simultaneously displays up to four thickness measurements.
Summation Mode: Displays the sum of up to three layer thickness measurements.
Material Velocity Range:
0.02000 - 0.55110 inch/µS
(0.5080 - 13.9979 mm/µS)
Resolution: (keypad selectable)
|
LOW:
|
0.01"
|
0.1 mm
| |
STANDARD:
|
0.001"
|
0.01 mm
| |
HIGH:
|
0.0001"
|
0.001 mm
|
Transducer Frequency Range:
2-30 MHz (-3 dB)
Min/Max Mode
Two Alarm Modes: Programmable Hi-Low Alarm with audible and visual indicators
1) Standard Hi-Low
2) Previous thickness
-Absolute
-Percentage
Two Differential Modes:
1) Thickness difference between actual measurement and reference value
2) Percent difference between actual measurement and reference value
Application Auto-Recall: Automatically adjusts internal parameters and zero offset for a wide variety of transducers.
Stored Standard Setups: 25 stored transducer setups to allow fast, easy calibration for our standard transducers.
Stored Custom Setups: Up to 35 stored custom transducer setups for best performance in special applications.
Power Supply
Battery: 6 V Rechargeable NiCad battery pack
Battery Life: 25 hours in normal measurement mode with backlight off
Fast-Charger: Two-hour Fast Charger with universal voltage
GENERAL
Keypad: Sealed color-coded keypad with tactile and audible feedback
Case: Water-resistant, gasketed Lexan® case with sealed connectors
Metric/English Units
Auto Power Off: On or off
Size: 9.375" x 5.45" x 1.5"
(238 x 138 x 38 mm)
Weight: 2.1 lbs. (0.95 kg)
Operating Temperature:
-10°C to +50°C. (+14°F to 122°F)
DISPLAY
Display: Liquid crystal display with backlight. Contrast keypad adjustable. Display area 4.0" x 3.39" (102 x 86 mm)
Backlight, Zoom Mode, Freeze Mode and Hold/Blank
Rectification: RF, half wave positive or negative, and full wave
WaveformDisplay Rangeand Delay Control
INTERNAL DATALOGGER
Datalogger and RS-232: Identifies, stores, recalls, clears, and transmits thickness readings, waveform images, and gage setup information via the RS-232 Serial Port. Baud Rate, Word Length, Stop Bits, and Parity are adjustable from the keypad.
Maximum # of Stored Values:| Standard: |
18,000 thickness readings or 1,750 waveforms with thickness
| | Upgrade 1: |
36,000 thickness readings or 3,400 waveforms with thickness
| | Upgrade 2: |
54,000 thickness readings or 5,100 waveforms with thickness
| | Location Codes: |
8-character file name plus 16-character alphanumeric location code input. Multiple Comments per location.
| | File Structures: |
7 standard or custom application-specific file structures
| | Reports: |
On-gage reporting of summary with statistics, Min/Max with locations, and File Comparison. On-screen comparison of current and previous readings.
|
Standard Inclusions
Model 25 MULTI PLUS Digital Ultrasonic Multilayer Thickness Gage, AC or Battery Operation, 50-60Hz, with Internal Alphanumeric Datalogger.
Including: Universal Quick Charger/AC Adapter, Transducer Cable, Test Block, Couplant, RS-232 I/O Cable, Carrying Case Instruction Manual and a Two Year Limited Warranty
Optional Accessories| PLUS/RPC |
Rubber Protective Case with Stand/ Straps
| | 36DLP/SPC/KIT |
Protective Pouch with Neck Strap
| | GageView |
Interface Program
| | 25DLP/EW |
Extended Limited Warranty, 3rd Year
| | 2214E† |
5-Step Test Block, 1018 steel, English Units: .100", .200", .300", .400", .500"
| | 2213E† |
5-Step Test Block, Aluminum, English Units: .100", .200", .300", .400", .500"
| | 26DLPLUS/HDC |
Heavy Duty Shipping Case
|
Please contact us for other accessories available with the Model 25 MULTI PLUS.
*All specifications are subject to change without notice.
Some 25 MultiPlus Applications
We are sorry, we could not find an Application Note matching your search criteria. However, there is good chance we have a solution for your application. We suggest you contact your local sales representative who can advice you in selecting the best instrumentation for your application. You may also browse our product literature library. |
The Panametrics 25 MULTI PLUS is an advanced ultrasonic precision thickness gage with several unique measurement capabilities. In addition to making thickness measurements on metal, plastic and many other materials with varying thickness ranges, the 25 MULTI PLUS has the ability to calculate and simultaneously display up to four separate measurements. The
Summation Mode accurately displays total thickness of selected layers.
