Evident LogoOlympus Logo
Компоненты сайта
InSight Blog

Vanta Handheld XRF Gets the Graphene Advantage

By -
Graphene

The X-ray detector in your analyzer has a small window that enables the X-rays to enter and reach the detector. Without this, the analyzer wouldn’t work. What this window is made of is important and impacts the effectiveness of your device. Light elements (like magnesium, aluminum, and silicon) have the weakest X-rays, so the thinner and lighter the window, the more of these X-rays can pass through. The more X-rays can pass through, the better the sensitivity of your XRF analyzer.

For a long time, the window was made of a beryllium foil. Beryllium is very light, but it’s hard to manufacture, fragile, brittle, and toxic. Even relatively slight impacts can damage the window, and, if it breaks, it’ll need to be replaced. Most beryllium windows are 8 microns or more thick.

Vanta VMR models are now equipped with graphene detector windows that are only 0.9 microns thick, enabling better light element detection than conventional beryllium windows.

Vanta graphene window

Advantages of graphene

Graphene is made of carbon; even though the window is very thin, it’s incredibly strong. Graphene windows allow more X-rays to pass through, increasing the analyzer’s sensitivity to key light alloy elements such as magnesium (Mg), aluminum (Al), silicon (Si), and even phosphorus (P) and sulfur (S). In addition, graphene is not toxic, unlike beryllium.

The unique benefits of graphene enable the Vanta model VMR handheld XRF analyzer to:

  • Detect magnesium (Mg) faster in aluminum alloys (0.53% Mg in 3 seconds of beam 2)
  • Achieve lower limits of detection for aluminum (Al) in nickel alloys
  • Measure silicon (Si) under 1000 ppm in low-alloy steels faster and with better precision
  • Measure phosphorus (P) and sulfur (S) in low-alloy steels below 0.035%

Related Content

Vanta for Light Element Detection Info Sheet

Video: Innovations for Vanta Analyzers and the Graphene Window

How Recent Handheld XRF Developments Impact Alloy PMI Testing

Vanta for PMI

Portable Products Manager, Analytical Instruments

Ted has worked at Olympus for more than 8 years and has overseen the introduction of numerous innovations to the XRF product lines with a focus on bringing laboratory-quality data to the portable market. Ted has a Master's degree in Applied Physics and holds two patents.
InSight Blog Sign-up
К сожалению, эта страница недоступна в вашей стране.
Let us know what you're looking for by filling out the form below.
К сожалению, эта страница недоступна в вашей стране.