Olympus Logo
Ресурсы
Application Notes
Назад к ресурсам

Internal Inspection of Various Hoses of Automobiles Using Industrial Videoscopes


automobiles_hoses_car_workshop

Background

The modern day automobile, with its internal combustion engine, includes as many as 80 to 100 hoses to move fluids and air to enable operation and comfort for the driver and passengers. These hoses deliver fluids including fuel, oil, hydraulic fluid, coolant, water and washer fluid, as well as gases, fresh air and exhaust, within the respective systems.

As the fluids vary, so too, the hoses vary, made of different materials, including metal, rubber, and plastic based on the respective usage. The table below lists a number of typical hoses.

Material Structure Usage Feature
Metal Metal tube Brake oil, Radiator, etc. The high temperature and high pressure conditions are involved.
Rubber Single layer, Multi-layer Fuel, Window washer liquid, etc. The condition where flexibility is required.
Plastic Irregular shape Air conditioner, etc. Light weight and large outer diameter, special shape, etc.

The Challenge

Hoses within the automobile are designed to withstand wear and tear under normal operating conditions. For example, hoses that deliver fluid to the brakes and recirculate coolant to the radiator must resist excessive heat and pressure to maintain normal operation of the vehicle. Hoses that circulate water to the air conditioner and throughout the automobile need barrier and vibrational absorption properties. Hoses that deliver fuel and window washer liquid need flexibility and durability to deliver fluids through a tangled route. Hose integrity is important for ongoing operation of the automobile. Internal/inner surface inspections for defects and quality control are essential. Industrial videoscopes inspect for defects, including rust, cracks, and shape defects.

automobiles_hoses_inside_of_a_high_pressure_hose
[Inside of a high pressure hose]     
automobiles_hoses_inner_coating_of_bellows_hose
[Inner coating of bellows hose]
automobiles_hoses_inside_of_a_metal_hose
[Inside of a metal hose]
automobiles_hoses_inside_of_a_plastic_hose
[Inside of a plastic hose]

The Olympus solution

Hoses within the automobile are designed with a variety of shapes and sizes based on the specific use. Olympus’ line of videoscopes includes different sized insertion tubes to easily penetrate and inspect the internal structure of each hose in the automobile. The outer diameter of the insertion tube varies from 2.4 mm to as large as 8.5 mm. Olympus videoscopes detect even the smallest defects with bright and high resolution images. The high resolution images are resolved using advanced lensing systems to assure the best fidelity, with distortion free images and natural color reproduction. In addition, Olympus videoscopes can use the built-in zoom function to enlarge the image for post inspection analysis.

Olympus videoscopes, with TrueFeel Articulation, provide the inspector with exceptional control to assure the scope follows the path of the hose even when it passes through complex shapes or manifolds to precisely face the target and image any defects.

automobiles_hoses_2.4mm_outer_diameter
[2.4 mm outer diameter]
automobiles_hoses_tip_articulation_of_iplex_tx
[Tip articulation of IPLEX TX]

Conclusion

Based on IP55 regulations compliance, excellent durability, and operability, Olympus industrial videoscopes are widely used by automobile and components manufacturers worldwide for their field inspections of automobile hoses.

For details on which Olympus videoscope is right for your application, contact your local sales representative.

Olympus IMS

Продукты, используемые для этой цели


IPLEX NX

В высокотехнологичном промышленном видеоскопе сочетаются портативность, расширенная функциональность, удобство использования и износостойкость. Универсальность функций, начиная с осмотров при помощи высококачественных изображений и заканчивая операциями поиска, гарантирует значительные преимущества и приобретение дополнительного опыта.

IPLEX RX/ IPLEX RT

IPLEX RX/ IPLEX RT это легкие промышленные видеоскопы, которые имеют уникальный процессор изображений PulsarPic, позволяющий воспроизводить чрезвычайно яркие и четкие изображения. Приборы имеют большой 6.5” дюймовый (165 мм) монитор дневного обзора с антибликовым покрытием.

Видеоскоп IPLEX TX

Ультратонкий эндоскоп с диаметром рабочей части 2,4 мм, с артикуляцией, способен проникнуть практически в любые узкие и извилистые места, четко выявляя мельчайшие дефекты.
Sorry, this page is not available in your country

Let us know what you're looking for by filling out the form below.

This site uses cookies to enhance performance, analyze traffic, and for ads measurement purposes. If you do not change your web settings, cookies will continue to be used on this website. To learn more about how we use cookies on this website, and how you can restrict our use of cookies, please review our Cookie Policy.

OK