자료실
Webinar - Introduction to Phased Array Inspection Using the OmniScan MX2 - Part Three
자료로 돌아가기
Webinar: Introduction to Phased Array Inspection Using the OmniScan MX2 - Part Three
Part three of the series will cover gate and C-scan configurations for weld inspection, calibration options and limitations, and include explanation and demonstration of the OmniScan MX2 calibration wizards for manual inspection. |
Part three of the series will cover gate and C-scan configurations for weld inspection, calibration options and limitations, and include explanation and demonstration of the OmniScan MX2 calibration wizards for manual inspection.
죄송합니다. 이 페이지는 해당 국가에서 사용할 수 없습니다.
아래 양식을 작성하여 원하는 내용을 알려주십시오.