Recursos
Webinar - Introduction to Phased Array Inspection Using the OmniScan MX2 - Part Three
Voltar para Recursos
Webinar: Introduction to Phased Array Inspection Using the OmniScan MX2 - Part Three
Part three of the series will cover gate and C-scan configurations for weld inspection, calibration options and limitations, and include explanation and demonstration of the OmniScan MX2 calibration wizards for manual inspection. |
Part three of the series will cover gate and C-scan configurations for weld inspection, calibration options and limitations, and include explanation and demonstration of the OmniScan MX2 calibration wizards for manual inspection.
Desculpe, esta página não está disponível no seu país
Diga-nos o que você está procurando preenchendo o formulário abaixo.