Skener ChainSCANNER poskytuje ruční řešení pro kontrolu potrubí s vnějším průměrem od 45 mm do 965 mm (1,75 palce až 38 palců). Skener je namísto magnetických koleček přidržován řetězovými články a je vhodný pro kontrolu svarů nebo koroze u různých typů materiálu, přičemž využívá technologie UT, TOFD a PA.
Skener ChainSCANNER usnadňuje ruční kontrolu potrubí s vnějším průměrem od 45 mm do 965 mm (1,75 palce do 38 palců) a nabízí možnost enkódování ve dvou osách. Skener, který je namísto magnetických koleček přidržován řetězovými články, je schopen provádět kontrolu feromagnetických nebo jiných než feromagnetických povrchů. Řetězové články také pomáhají zajistit přímý posun skeneru tím, že eliminují problémy s řízením. Nakonec se tento skener hodí, když je prostor kolem potrubí obtížně přístupný, protože se může otáčet kolem potrubí pomocí řetězových článků.
Hlavní oblasti použití jsou následující:
- Kontroly obvodových svarů potrubí pomocí technologie phased array, TOFD nebo konvenčního ultrazvukového testování (UT)
- Mapování koroze malých oblastí pomocí technologie phased array nebo konvenčního UT (pomocí XY; 2 modely enkodéru)
Systém polohování sondy pomocí úpravy hlavního šroubu
Standardní obsah
- Hlavní modul s enkodérem osy skenování
- Řetězové články pro potrubí s vnějším průměrem 5 palců, 16 palců nebo 38 palců (v závislosti na modelu) s rychločinnou nastavitelnou sponou
- 5metrový kabel enkodéru pro OmniScan
- 450mm (17,7palcová) tyčka držáku sondy
- Dva pružinové držáky sond s nastavitelnými třmeny TOFD-P/E
- Dva pružinové držáky sond s nastavitelnými třmeny phased array
- Systém polohování sondy pomocí úpravy hlavního šroubu
- 5metrový rozdělitelný kabelový kanál (s vnitřním průměrem 19 mm)
- Irigační trubky a spojky
- Nástroj skeneru CHAIN™
- Přepravní pouzdro
Poznámka: Sondy a klíny nejsou součástí dodávky skeneru.
Specifikace
Délka v ose skenu
(mm)
|
Šířka
(mm)
|
Výška
(mm)
|
Hmotnost
(kg)
|
114
|
75
|
84
|
1
|
Poznámka: Výše uvedené specifikace se vztahují k hlavnímu modulu.
Rozlišení enkodéru:
Obvodová osa (X): 19,2 kroku/mm
Podélná osa (Y): 56,7 kroku/mm
Balíčky volitelného příslušenství
ChainScan-A-4Probe: Samostatný balíček potřebný k provádění kontrol pomocí čtyř sond na skeneru CHAIN
| ChainScan-A-mouse: Samostatný balíček, který je potřebný k používání skeneru CHAIN ve tvaru počítačové myši se zádržným systémem s magnetickým kolečkem namísto řetězových článků
| ChainScan-A-SBar: 20centimetrová tyčka držáku a sada hlavního šroubu vhodná pro použití ve stísněných prostorech
|