Olympus Logo

Kontaktujte nás Kontaktujte nás

  • Produkty▾
    • Defektoskopy▾
      • Defektoskopy▾
        • Přenosné ultrazvukové defektoskopy
        • Přístroje Phased Array
        • Produkty pro zkoušky vířivými proudy
        • Produkty pro metodu vířivých proudů
        • BondTesting
      • Ruční měření tloušťky materiálu▾
        • 27MG
        • 45MG
        • 38DL PLUS
        • Magna-Mike 8600
        • 35RDC
        • Převodníky a příslušenství
      • Sondy a převodníky▾
        • Ultrazvukové převodníky Panametrics
        • Sondy vířivých proudů
        • Sondy pro kontrolu trubek
        • R/D Tech sondy pro apl. fázového pole
        • Sondy BondMaster
      • Integrované inspekční systémy▾
        • Sondy vířivých proudů
        • Systém pro kontrolu plných tyčí
        • Systémy kontroly trubek
        • Friction Stir Weld Inspection System
      • NDT Systems Instrumentation ▾
        • FOCUS PX / PC / SDK
        • QuickScan
      • Průmyslové skenery▾
        • Kontrolní skenery svarů
        • Skenery pro kontrolu svaru
        • Letecké kontrolní skenery / kontrolní skenery lopatek větrných turbín
        • Příslušenství ke skenerům
      • The Olympus Scientific Cloud
    • Průmyslové spektrometry▾
      • Ruční XRF analyzátory▾
        • Vanta
        • Vanta Element
        • DELTA Professional
      • Kompaktní a přenosné XRF analyzátory▾
        • Vanta
        • Vanta Element
        • GoldXpert
        • Xpert for Consumer/RoHS
      • Procesní XRF analyzátory▾
        • FOX-IQ
      • XRD analyzátory▾
        • TERRA II Portable XRD Analyzer
        • BTX III Benchtop XRD Analyzer
      • OEM řešení▾
        • X-STREAM
      • Aplikace a řešení – přehled
      • The Olympus Scientific Cloud
    • Mikroskopy▾
      • Scanning Probe Microscopy▾
        • OLS4500
      • Laserové konfokální mikroskopy▾
        • OLS5100
      • Digitální mikroskopy
      • Měřicí mikroskopy▾
        • STM7
        • STM7-BSW
      • Vyhodnocování technické čistoty▾
        • OLYMPUS CIX100
      • Optické mikroskopy▾
        • Vzpřímené mikroskopy
        • Inverzní mikroskopy
        • Modular Microscopes
      • Polovodičové mikroskopy a inspekční mikroskopy s plochým panelovým displejem▾
        • MX63 / MX63L
        • AL120
        • AL120-12
      • Stereo mikroskopy▾
        • SZX16
        • SZX10
        • SZX7
        • SZ61/SZ51
      • Digitální kamery▾
        • DP74
        • SC180
        • UC90
        • DP27
        • SC50
        • LC30
        • DP22
        • XM10
        • XM10IR
      • Software obrazové analýzy▾
        • OLYMPUS Stream
      • Micro Spectrophotometer▾
        • USPM-RU-W
        • USPM-RU III
      • Objektivy▾
        • MPLAPON
        • MPLAPON-Oil
        • MPLN
        • MPLN-BD
        • MPLFLN
        • MPLFLN-BD
        • MPLFLN-BDP
        • LMPLFLN
        • LMPLFLN-BD
        • SLMPLN
        • LCPLFLN-LCD
        • LMPLN-IR/LCPLN-IR
        • White Light Interferometry Objective
        • Micrometer
      • OEM komponenty mikroskopů pro integraci▾
        • Řešení integrace zařízení
        • Objective Lenses
        • Stativy optických mikroksopů
        • Super širokoúhlý tubus
        • Optical Microscope Modules
        • Sestavy modulárního mikroksopu
      • Mikroskopy – často kladné otázky
    • Průmyslové endoskopy▾
      • Průmyslové videoskopy▾
        • IPLEX NX
        • IPLEX GAir
        • IPLEX GX/GT
        • IPLEX G Lite
        • IPLEX TX
        • Videoskopy IPLEX s dlouhými sondami
      • Průmyslové fibroskopy▾
        • Fibroskopy - malé průměry
      • Průmyslové boroskopy▾
        • Boroskopy - standartní řada
        • Boroskopy s natáčecím prismatem
        • Boroskopy s natáčecím prismatem a se zoomem.
        • Miniboroskopy - typ MK
        • Boroskopy pro letecké motory
      • Zdroje světla
      • Software pro vyhodnocování technické čistoty▾
        • InHelp
  • Průmyslové odvětví
  • Blog
  • Zdroje informací
  • Podpora▾
    • Kontaktujte nás
    • Olympus Scientific Cloud
    • Školicí akademie
    • Customer Service
    • Servisní střediska
    • Stahování software
    • Důležitá upozornění
    • Starší produkty
    • Product Service Termination List
    • ISO Certifikace
    • MSDS datové listy
    • Podmínky dodání
    • CIC
    • Olympus Technolab
    • Microscope Classroom
    • Compliance and Ethics at Olympus
    • Same Day Shipping Program
    • Custom Financing Solutions
  • Rentals
  • Shop
  • Hledat
  • My Account
    • IMS Log in
    • IMS Registration
    • My Apps
    • My Devices
    • My Data
    • OSC Marketplace
    • My Organization
    • OSC Log in
    • OSC Log in
    • Log Out
    • Log Out
Průmyslová řešení
Defektoskopy

27MG

Kontaktujte násKontaktujte nás
Žádost o cenovou nabídkuŽádost o cenovou nabídku
Požádat o prezentaciVyzkoušení na vaší aplikaciPožádat o prezentaciVyzkoušení na vaší aplikaci
Loading the player…
sourcecaptionscaptionscaptionscaptionscaptionscaptionscaptionscaptionscaptions
Watch Video
27MG Ultrasonic Thickness Gage Introductory Video
Hlavní stránka/ Produkty/ Defektoskopy/ Ruční měření tloušťky materiálu/ 27MG
Loading...
  • Overview
  • Specifications
  • Transducers
  • Resources

Overview

The Olympus 27MG is an affordable ultrasonic thickness gauge designed to make accurate, measurements from one side on internally corroded or eroded metal pipes, tanks, and other equipment. It weighs only 12 oz. (340 g) and is ergonomically designed for easy, one-hand operation. Despite its compact size, the 27MG has many innovative measurement features utilizing the same technologies that are available on our more advanced thickness gauges. The durable, rugged 27MG is battery-operated and features a large, backlit LCD with easy-to-read numerals, and an intuitive color-coded keypad with direct access to many key features.


360 View

Standard features include Automatic Probe Recognition to ensure optimal transducer performance, Auto Zero compensation to enhance the accuracy of measurements on hot surfaces, Gain Adjust to improve measurements on sound-attenuating materials such as cast metals, Differential mode, Hi-Low Alarm settings, and a Min./Max. mode that captures the minimum or maximum thickness at 20 measurements per second.

The 27MG is designed for inspectors and maintenance engineers that need to monitor the wall thickness in metal pipes, tanks, beams, and structural supports that are susceptible to corrosion on the inside surface. An ultrasonic thickness gauge provides a quick, cost-effective solution by transmitting sound into the material from the outside, making it unnecessary to damage the part.

Transducers

The 27MG comes standard with the low-cost D7910 dual element transducer that enables you to make thickness measurement for many basic corrosion applications. For measurements on very thin or thick materials, or small diameter pipes, Olympus has available a full line of dual element transducers. Olympus transducers compatible with the 27MG feature Automatic Probe Recognition that optimizes transducer performance by automatically recalling the default V-path correction.

27MG with the optional Protective Rubber Boot with Neck Strap and Gage Stand

27MG with the optional Protective Rubber Boot with Neck Strap and Gauge Stand

Specifications

Measurements > Dual element transducer measurement mode Time interval from a precision delay after the excitation pulse to the first echo
Measurements > Thickness range 0.50 mm to 635 mm (0.020 in. to 25.0 in.) depending on material, transducer, surface conditions, temperature
Measurements > Material velocity range 0.508 mm/μs to 18.699 mm/μs (0.020 in./μs to 0.7362 in./μs)
Measurements > Resolution (selectable) Low: 0.1 mm (0.01 in.)
Standard: 0.01 mm (0.001 in.)
Measurements > Transducer frequency range 2.25 MHz to 10 MHz (–3 dB)
General > Operating temperature range -10 °C to 50 °C (14 °F to 122 °F)
General > Keypad Sealed, color-coded keypad with tactile and audible feedback
General > Case Impact-resistant and water-resistant, gasketed case with sealed connectors. Designed for IP65.
General > Dimensions (W x H x D) 84.0 mm x 152.4 mm x 39.6 mm (3.31 in. x 6.0 in. x 1.56 in.)
General > Weight 340 g (12 oz)
General > Power Supply 3 AA alkaline batteries
General > Battery life operating time 150 h of typical battery life, 30 h continuous use with backlight
General > Explosive Atmosphere Safe operation as defined by Class I, Division 2, Group D, as found in the National Fire Protection Association Code (NFPA 70), Article 500, and tested using MIL-STD-810F 511.4 Procedure I
General > Standards Designed for EN15317
General > Alarm mode Programmable Hi/Low set points with audible and visual indicators
Display > Display Hold/Blank mode Holds or blanks the display after measurements
Display > Backlight Electroluminescent backlight, Selectable as On or Auto On
Display > Receiver bandwidth 1 MHz to 18 MHz (–3 dB)
Display > Metric/English mode Metric or English units
Display > Display languages English, French, German, Spanish, Italian,Portuguese, Russian, Polish, and Swedish

Standard Package

  • 27MG digital ultrasonic thickness gauge
  • Dual element transducer
  • AA alkaline batteries
  • Test block and couplant
  • Carrying case
  • Wrist strap
  • User’s manual on CD
  • Getting started Guide
  • Measurement features: Min./Max. mode, Differential mode, Gain Adjust Freeze mode, Automatic Probe Recognition, Zero Compensation

Standard inclusions may vary depending on your location. Contact your local distributor.

Optional Accessories

  • 2214E (U8880014): 5-step test block, English units
  • 2214M (U8880016): 5-step test block, metric units
  • 27MG/RPC (U8780343): Protective rubber boot with Neck Strap and Gauge Stand

For additional accessories such as holders, wands, and couplants, please consult Olympus.

Transducers

Transducers with Automatic Probe Recognition

The 27MG is compatible with our complete line of easy interchangeable dual element transducers that vary in frequencies, diameters, and temperature capabilities to deal with virtually every application.

TransducerItem NumberFreq. (MHz)ConnectorTip Diameter mm (in.)Range (Steel)1 mm (in.)Temp. Range2 ºC (ºF)CableItem Number
D7910 U8454038 5.0 90° 12.7
(0.500)
1.00 to 254
(0.040 to 10.00)
0 to 50
(32 to 122)
Potted —
D790 U8450002
5.0
Straight 11.00
(0.434)
1.00 to 500.00
(0.040 to 20.000)

-20 to 500
(-5 to 932)
 
Potted —
D790-SM U8450009 Straight LCMD-316-5B3 U8800353
D790-RL U8450007 90° LCLD-316-5G3 U8800330
D790-SL U8450008 Straight LCLD-316-5H U8800331
D791 U8450010 5.0 90° 11.00
(0.434)
1.00 to 500.00
(0.040 to 20.000)
-20 to 500
(-5 to 932)
Potted —
D791-RM U8450011 5.0 90° 11.00
(0.434)
1.00 to 500.00
(0.040 to 20.000)
-20 to 400
(-5 to 932)
LCMD-316-5C U8800345
D7912 Q4530005 10.0 Straight 7.5
(0.295)
0.50 to 25.00
(0.020 to 1.000)
0 to 50
(32 to 122)
Potted —
D7913 Q4530006 10.0 90° 7.5
(0.295)
0.50 to 25.00
(0.020 to 1.000)
0 to 50
(32 to 122)
Potted —
D797 U8450016 2.0 90° 22.9
(0.900)
3.80 to 635.00
(0.150 to 25.000)
-20 to 400
(-5 to 752)
Potted —
D797-SM U8450017 Straight LCMD-316-5D U8800355
D7226 U8454013 7.5 90° 8.90
(0.350)
0.71 to 50.00
(0.028 to 2.000)
-20 to 150
(-5 to 300)
Potted —
D798-LF U8450019
D798 U8450018 7.5 90° 7.20
(0.283)
0.71 to 50.00
(0.028 to 2.000)
-20 to 150
(-5 to 300)
Potted —
D798-SM U8450020 Straight LCMD-316-5J U8800357
D799 U8450021 5.0 90° 11.00
(0.434)
1.00 to 500.00
(0.040 to 20.000)
 -20 to 150
(-5 to 300)
Potted —
MTD7054 U8620225 5.0 90° 5.10
(0.200)
1.00 to 19.00
(0.040 to 0.750)
0 to 50
(32 to 122)
LCPD-78-5 U8800332

1 Dependent on material, transducer type, surface conditions, and temperature. Full range may require Gain Adjust.
2 Maximum temperature with intermittent contact only.
3 Stainless steel cable available; consult Olympus for details.
4 Not certified to EN15317; these transducers are issued TP103 test certificates in accordance with ASTM E1065.

Resources

Příklady aplikací

High-Temperature Ultrasonic Testing
Ultrasonic Testing FAQs
High Temperature Ultrasonic Testing
Corrosion Thickness Gauging with Dual Element Transducers
Wall Thickness Measurements of Metal Pipes and Tubes
Ultrasonic Thickness Measurements of Hot Metals
Metal Coils Thickness Inspection
Wall Thickness Measurements for Metal Cans, Containers and Enclosures
 Ukázat více

Videa

Metal Industry Inspection Solutions video
27MG Ultrasonic Thickness Gage Introductory Video

Webináře

Advantages of Ultrasonic Thickness Gages over Flaw Detectors for Corrosion Thickness Measurements

Teorie

An Introduction to Ultrasonic Transducers for Nondestructive Testing
Ultrasonic Transducer Technical Notes (PDF Brochure)
Ultrazvukové měření tloušťky materiálu
 Ukázat více

Návody

Thickness Gage Tutorial

Prospekty

27MG Ultrasonic Thickness Gage

Manuály

27MG User's Manual
27MG Getting Started Guide

Řešení

Metal Industry Inspection Solutions
Measurement Solutions
Sorry, this page is not available in your country
Let us know what you're looking for by filling out the form below.

Kontaktujte nás

Please, choose division
Přihlašte se k odběru zpravodaje NDT, elektronického buletinu, který Vás bude informovat o speciálních nabídkách, nových produktech nebo aplikacích.

  • Kontaktujte násKontaktujte nás
  • Žádost o cenovou nabídkuŽádost o cenovou nabídku
  • Požádat o prezentaciVyzkoušení na vaší aplikaciPožádat o prezentaciVyzkoušení na vaší aplikaci
  • Kontaktujte nás
  • Defektoskopy
    • Defektoskopy
    • Ruční měření tloušťky materiálu
      • 27MG
      • 45MG
      • 38DL PLUS
      • Magna-Mike 8600
      • 35RDC
      • Převodníky a příslušenství
    • Sondy a převodníky
    • Integrované inspekční systémy
    • NDT Systems Instrumentation
    • Průmyslové skenery
    • The Olympus Scientific Cloud
  • Průmyslové spektrometry
  • Mikroskopy
  • Průmyslové endoskopy
  • Zaregistrovat se pro odběr Newsletterů
Hlavní stránka/ Produkty/ Defektoskopy/ Ruční měření tloušťky materiálu/ 27MG
Tisk

Copyright OLYMPUS CORPORATION, All rights reserved.

Global | Terms Of Use | Privacy Statement | Cookies | O nás | Careers | Careers | Mapa webu

Copyright OLYMPUS CORPORATION, All rights reserved.

Global | Terms Of Use | Privacy Statement | Cookies | O nás | Imprint | Careers | Careers | Mapa webu

  • Youtube
  • LinkedIn
  • Twitter
  • Facebook

This site uses cookies to enhance performance, analyze traffic, and for ads measurement purposes. If you do not change your web settings, cookies will continue to be used on this website. To learn more about how we use cookies on this website, and how you can restrict our use of cookies, please review our Cookie Policy.

OK
Cancel