Webinar - Phased Array TOF Calibrations for Precision Measurements using OmniScan MX2

Webinar: Phased Array TOF Calibrations for Precision Measurements using OmniScan MX2

This webinar is intended to demonstrate use of both UT calibration blocks for procedure compliance along with best practices for optimized phased array results using the OmniScan MX2 and latest software.

웨비나에 액세스하려면 양식을 작성하십시오.

위치: *

회사명 *

이름 *

성 *

이메일 *

도시

우편번호 *

예, 제품정보와 업데이트 소식을 받겠습니다.

I agree to the Terms of Use and acknowledge that I have read the Privacy Policy*

If you already have your personal ID enter it here:

Precision phased array calibrations for time of flight measurements combine the phased array calculator and traditional conventional UT wedge delay functions. This webinar is intended to demonstrate use of both UT calibration blocks for procedure compliance along with best practices for optimized phased array results using the OmniScan MX2 and latest software.

죄송합니다. 이 페이지는 해당 국가에서 사용할 수 없습니다.

아래 양식을 작성하여 원하는 내용을 알려주십시오.

Webinar - Phased Array TOF Calibrations for Precision Measurements using OmniScan MX2

Webinar: Phased Array TOF Calibrations for Precision Measurements using OmniScan MX2

웨비나에 액세스하려면 양식을 작성하십시오.

Redirecting