"OmniScan MX2 For Corrosion Mapping and Position C-scan" Webinar
January 30, 2013 - Chris Magruder delivers demonstrations and explanations of a 1D linear array probe optimized for corrosion mapping and similar applications using the position C-scan on the OmniScan MX2.
February 28, 2013 - Chris Magruder presents the latest addition to the OmniScan MX2 family of modules: The Omni-PA2 module. With an emphasis on improved TOFD, the new Omni-PA2 module combines the MX2 phased array capability with simultaneous TOFD acquisitions from an independent high definition UT board for improved A-scan quality and TOFD B-scan imaging.
"Phased Array Crack Sizing with the OmniScan MX2" Webinar
March 22, 2013 - Precision phased array crack sizing improves on traditional conventional UT inspection techniques through use of beam focusing and improved crack tip imaging. This webinar is intended to demonstrate use of common crack sizing techniques and best practices for optimizing the OmniScan MX2 for manual and semi-automated crack detection and sizing. Covered topics include OmniScan sector scan setup and calibration, phased array setup for shear wave tip
diffraction, high angle long wave inspection, ID creeping wave inspection, and use of advanced probes for austenitic materials. The Webinar will demonstrate crack sizing A-B-C's using the OmniScan MX2 live, and also include analysis of sample crack data files using OmniPC and latest software.
