Evident LogoOlympus Logo
뉴스
2013년 10월 1일

Olympus Introduces New Software and Solutions for the Eddy Current Array and Bond Testing Modules used with the OmniScan MX Flaw Detector

Olympus, a world leader in nondestructive testing technologies, is pleased to announce the addition of new software and solutions for the Eddy Current Array and Bond Testing modules used with the field-proven OmniScan MX flaw detector.

To meet the requirements of a broader range of applications, conventional eddy current testing (ECT), eddy current array (ECA) and the new bond testing (BT) C-scan technology are available with the two module versions. Both of these modules are compatible with the redesigned MXE (ECT/ECA) and MXB (BT C-scan) software, providing easy transition between technologies and a short learning curve. Thanks to its intuitive interface design, the OmniScan MX ECA is quick and easy to configure and operate.

The OmniScan MX in eddy current array (ECA) mode has a unique ability to perform inspections through thin coatings on conductive material. This capability provides a tremendous advantage over existing methods, such as penetrant testing, magnetic particle or magneto-optical imaging (MOI), as the need to remove and then reapply paint or coating is eliminated. Additional benefits are significant cost-savings, instant inspection results, reduced turnaround time, and most importantly, chemical-free inspections. The new MXE 3.0 ECA software also features a range of color-palette representations that replicate the look of traditional NDT methods and facilitate the intuitive display of ECA signals.

The OmniScan MX ECA with its newly redesigned, intuitive interface and data cursors features integrated data-storage, analysis, and reporting functionalities that enable the inspector to review individual defect indications and apply corrections as needed.

The new C-scan bond testing (BT) technology on the OmniScan MX ECA/ECT instrument is ideal for honeycomb composite inspections. This MX BT software is dedicated exclusively to the bond testing C-scan solution and features the same user-friendly interface as the MXE software to help minimize the learning curve.

With thousands of units being used throughout the world, the OmniScan MX is a field-proven, reliable instrument that is built to withstand harsh and demanding inspection conditions. Compact and lightweight, its two Li-ion batteries provide up to 6 hours of manual or semi-automated inspection time. The highly legible 8.4 in. (213 mm) real-time color display of the OmniScan MX enables viewing of defects and details under any light conditions.

The new software comprising eddy current array, conventional eddy current, and bond testing technologies along with improved software features makes the OmniScan MX a unique nondestructive testing instrument for applications in the aerospace and oil & gas industries.
 

Learn more >

<< Back to News

10월 01, 2013
Not available in your country.
죄송합니다. 이 페이지는 해당 국가에서 사용할 수 없습니다.
아래 양식을 작성하여 원하는 내용을 알려주십시오.

소셜 뉴스

죄송합니다. 이 페이지는 해당 국가에서 사용할 수 없습니다.