Flaw Detectors

Accupath & Short Approach Wedges

Accupath Wedges

Small wedge footprint
Pointed toe design allows transducer rotation even when the nose is touching a weld crown
Special wedge design for use with 10 MHz transducer

Accupath and Surface Wave Wedge Dimensions* (Miniature Screw-in)
Fits Nominal Element Size (in inches)
		0.5					0.375					0.25
		(A)	(B)	(C)	(D)		(A)	(B)	(C)	(D)		(A)	(B)	(C)	(D)
30°		0.72	1.22	0.77	0.54		0.62	1.03	1.03	0.42		0.49	0.66	0.45	0.23
45°		0.70	1.03	0.73	0.38		0.60	0.85	0.61	0.32		0.43	0.61	0.43	0.235
60°		0.74	1.19	0.73	0.45		0.67	1.00	0.61	0.367		0.48	0.71	0.43	0.268
70°		0.79	1.34	0.73	0.50		0.69	1.12	0.61	0.406		0.50	0.81	0.43	0.305
90°		1.25	1.84	0.77	-		1.00	1.48	1.48	-		0.83	1.13	0.45	-

Miniature Screw-In Wedges for 10 MHz Transducers

Nominal Element Size		Wedge Part Numbers
inches	mm	Accupath*	Surface Wave 90°
0.50	13	ABWM-5ST-X°	ABWML-5ST-90°
0.375	10	ABWM-7ST-X°	ABWML-7ST-90°
0.25	6	ABWM-4ST-X°	ABWML-4ST-90°

*Accupath Wedges are available in standard refracted shear wave angles of 30°, 45°, 60°, and 70° in steel at 10 MHz.

Short Approach Wedges

Smallest footprint
Short approach distance allows for inspection closest to the weld crown

Short Approach Wedge Dimensions (Miniature Screw-in)
Fits Nominal Element Size (in inches)
	0.5				0.375				0.25
	(A)	(B)	(C)	(D)	(A)	(B)	(C)	(D)	(A)	(B)	(C)	(D)
45°	0.70	1.03	0.73	0.38	0.60	0.85	0.61	0.32	0.43	0.61	0.43	0.235
60°	0.74	1.19	0.73	0.45	0.67	1.00	0.61	0.367	0.48	0.71	0.43	0.268
70°	0.79	1.34	0.73	0.50	0.69	1.12	0.61	0.406	0.50	0.81	0.43	0.305

홈 > 제품 > Flaw Detectors > Probes and Transducers

Olympus

Inspection & Measurement Systems

Copyright 2011 OLYMPUS CORPORATION, All rights reserved. Condizioni d'uso | Informativa sulla privacy