Integrated QuickScan iX PA data acquisition instrument accommodating PA probes with up to 256 elements and up to 10 independent UT probes.
Acquisition unit conveniently mounted on the scanner, eliminating signal attenuation due to a long umbilical cable.
Embedded with Eclipse Scientific’s BeamTool software for inspection and analysis, offering the zonal discrimination technique including a zonal cal block designer.
Software equipped more automated tools:
Auto-setup
Auto-layout
Encoder auto-calibration
Assisted analysis
Auto-sizing in height and length
Quick-connect umbilical cable is light, swivels easily, and come in various lengths, simplifying cable management and improving the signal-to-noise ratio (SNR).
Length options: 10 m, 20 m, 30 m, and 50 m (32.8 ft, 65.6 ft, 98.4 ft, and 164 ft).
Scanner carriage is easy to set up and operate with its improved clamping and drive wheel adjustment mechanisms, making it easier to adapt to different pipe diameters.
Minimal parts requiring low maintenance and designed for durability in all conditions.
Width of the band is reduced, lowering the required coating cutback (shorter coating cutback than the previous model); the same band can be used for 2 pipe diameters using the optional spacers .
Probe module holds up to 12 probes; you can easily remove and add sections as required.
The smart spring-loaded arms (low maintenance) holding the probes are equipped with a pointer to set accurately the index offsets.
Direct communication between scanner technician and operator (“Ready” button and scan validation light).
GPS option to record geographic position in the data file.
System hardware is ready to support FMC/TFM (upcoming software feature).
このページはお住まいの地域ではご覧いただくことはできません。
Let us know what you're looking for by filling out the form below.
