This solution features special curved linear arrays of 16 to 64 elements and appropriate positioning hardware to align all of ultrasonic beams at 90 degrees to the curved inspection surface allowing for complete inspection from the ID or OD. The main advantage of utilizing this inspection solution is rapid inspection of the entire area in a single pass with proper detection angles.Adjustable positioning wedges combined with the sector scan view allow quick adjustment of the beams to ensure proper angle of incidence all along the radius.The front wall of the radius will appear flat when properly adjusted by the positioning knob. The proper probe holders can be selected by the basic corner geometry. The same probe can be used on a wide variety of geometries by changing the probe holder.The probes can also be positioned in immersion tanks using typical probe positioning methods.
The use of CFRP (Carbon fiber reinforced polymers) in manufacturing is widespread and growing due to the demand for strong but lighter building materials. Aerospace and wind power are just a few of the industries increasing there use of composites in the manufacturing stage. As the use of composites has grown so has the complexity of various shapes and sizes current manufacturing technologies can produce out of composite materials. One of the primary inspection difficulties in CFRP material is the inspection of radiused shapes.
Flat composites are primarily tested with ultrasound with 0 degree transducers for delaminations and porosity that are usually detected best perpendicular to the accessible surface of the composite build up.Phased Array Ultrasonics has recently advanced this inspection offering new rapid testing solutions for flat CFRP parts. Radii parts pose an inspection issue because of the curved shape and access to either the inner or outer diameter of that radius.
Instrument Features:
Portable or fixed Immersion station testing
OmniScan user friendly interface or TV computer control
Multiple C-Scan and Gating options
Full A-scan / S-scan / C-scan / B-scan recording
Customizable amplitude and thickness color palette
Post analysis with TV software or OmniPC with composite specific tools
Curved Linear Probe Features:
Acoustically matched to water
High resolution around the radius
Corrosion resistant stainless steel casing
Waterproof guarantee up to 1m
Compatible with adjustable wedges for ID/OD inspection
Este novo software é a opção mais eficiente e econômica para análise de dados do OmniScan,
possui as mesmas ferramentas de análise fornecidas no software integrado OmniScan, com a versatilidade de ser executado em um computador pessoal.
As sondas de matriz curva são feitas com cápsulas de aço inoxidável resistente à corrosão e à prova d'água (submersa até 1 metro). A impedância acústica dessas sondas é semelhante à da água. Elas são compatíveis com calços de imersão ajustáveis é são usadas para a inspeção de cantos de polímeros reforçados com fibra de carbono (CFRP, sigla em inglês), além da inspeção de delaminação em compósitos.
O OmniScan SX, leve e de grupo único, possui tela sensível ao toque de 8,4 pol. (21,3 cm) de fácil leitura e oferece soluções com boa relação custo-benefício. O OmniScan SX possui dois modelos: PA e UT. O SX PA é uma unidade 16:64PR, que, como o UT e SX UT, vem equipado com um canal de UT convencional para inspeções pulso-eco, pitch-catch e ToFD.
Desculpe, esta página não está disponível no seu país
Desculpe, esta página não está disponível no seu país
Diga-nos o que você está procurando preenchendo o formulário abaixo.
