This Webinar is intended to take the participant through the basics of phased array depth and height flaw sizing with real world examples by expanding on traditional conventional techniques with advanced phased array probes and software. Shear wave tip diffraction, -6dB sizing, high angle longitudinal L-wave, ID Creeping wave, and other advanced techniques will be on display. Additionally, use of the OmniScan measurement cursors, defect table and report are explained and demonstrated.
Also on display will be Olympus' new software "OmniPC" for computer based offline analysis of OmniScan data files.
웨비나-옴니스캔 MX2를 사용한 위상 배열 결함 크기 조정내레이션 언어 :English
OmniScan MX2 Product Overview
옴니스캔 MX2 제품 개요내레이션 언어 :English사용 가능한 자막 :Chinese, English, French, German, Italian, 日本語, Portuguese, Russian, Spanish
Showcasing the MX2, Cobra scanner, NDT Setup Builder, and OmniPC for advanced NDT work flow process.
용접 검사용 옴니스캔 MX2 용접 검사 워크플로내레이션 언어 :English사용 가능한 자막 :Chinese, English, French, German, Italian, 日本語, Portuguese, Russian, Spanish
This Webinar is intended to take the participant through the basics of phased array depth and height flaw sizing with real world examples by expanding on traditional conventional techniques with advanced phased array probes and software. Shear wave tip diffraction, -6dB sizing, high angle longitudinal L-wave, ID Creeping wave, and other advanced techniques will be on display. Additionally, use of the OmniScan measurement cursors, defect table and report are explained and demonstrated.
Also on display will be Olympus' new software "OmniPC" for computer based offline analysis of OmniScan data files.