This Webinar is intended to take the participant through the basics of phased array depth and height flaw sizing with real world examples by expanding on traditional conventional techniques with advanced phased array probes and software. Shear wave tip diffraction, -6dB sizing, high angle longitudinal L-wave, ID Creeping wave, and other advanced techniques will be on display. Additionally, use of the OmniScan measurement cursors, defect table and report are explained and demonstrated.
Also on display will be Olympus' new software "OmniPC" for computer based offline analysis of OmniScan data files.
Вебинар – Применение фазированных решеток – Определение размеров дефектов с помощью OmniScan MX2Narration Language:English
OmniScan MX2 Product Overview
OmniScan MX: Настройка вихретоковых матриц для контроля качества авиаконструкцийNarration Language:EnglishSubtitles Available:Китайский, English, Французский, German, Italian, 日本語, Portuguese, Русский, Испанский
Showcasing the MX2, Cobra scanner, NDT Setup Builder, and OmniPC for advanced NDT work flow process.
OmniScan MX: Новые разработки и обновленияNarration Language:EnglishSubtitles Available:Китайский, English, Французский, German, Italian, 日本語, Portuguese, Русский, Испанский
This Webinar is intended to take the participant through the basics of phased array depth and height flaw sizing with real world examples by expanding on traditional conventional techniques with advanced phased array probes and software. Shear wave tip diffraction, -6dB sizing, high angle longitudinal L-wave, ID Creeping wave, and other advanced techniques will be on display. Additionally, use of the OmniScan measurement cursors, defect table and report are explained and demonstrated.
Also on display will be Olympus' new software "OmniPC" for computer based offline analysis of OmniScan data files.
Have a question about a product or solution featured in this video?