Numéro d’article | Type de sonde |
Angle nominal du faisceau réfracté
(dans l’acier) | Balayage recommandé (°) | Orientation de la sonde | Dimensions du sabot (mm) | ||||
L | P | P* | H | ||||||
SA00-0L | A00 | 0° – OL | De −30 à 30 | Normal | 16 | 12 | N/A | 12 | |
SA00-N60S | A00 | 60° – OT | De 40 à 70 | Normal | 21 | 14 | N/A | 13 | |
SA0-0L | A0 | 0° – OL | De −30 à 30 | Normal | 23 | 12 | N/A | 11 | |
SA0-N60S | A0 | 60° – OT | De 40 à 70 | Normal | 32 | 18 | N/A | 21 | |
SA1-0L | A1 | 0° – OL | De −30 à 30 | Normal | 29 | 30 | 30 | 20 | |
SA1-N60S | A1 | 60° – OT | De 40 à 70 | Normal | 30 | 30 | 40 | 16 | |
SA1-N60L | A1 | 60° – OL | De 40 à 70 | Normal | 28 | 30 | 40 | 21 | |
SA2-0L | A2 | 0° – OL | De −30 à 30 | Normal | 65 | 30 | 40 | 20 | |
SA2-N60L | A2 | 60° – OL | De 40 à 70 | Normal | 79 | 30 | 40 | 50 | |
SA2-N55S | A2 | 55° – OT | De 40 à 70 | Normal | 69 | 30 | 40 | 43 | |
SA3-0L | A3 | 0° – OL | De −30 à 30 | Normal | 38 | 37 | 50 | 20 | |
SA3-N45S | A3 | 45° – OT | De 40 à 60 | Normal | 55 | 37 | 50 | 30 | |
SA3-N45L | A3 | 45° – OL | De 30 à 60 | Normal | 55 | 37 | 50 | 49 | |
SA3-N60S | A3 | 60° – OT | De 40 à 70 | Normal | 58 | 37 | 50 | 32 | |
SA3-N60L | A3 | 60° – OL | De 40 à 70 | Normal | 53 | 37 | 50 | 40 | |
SA4-0L | A4 | 0° – OL | De −30 à 30 | Normal | 59 | 47 | 55 | 20 | |
SA4-N45S | A4 | 45° – OT | De 40 à 60 | Normal | 90 | 47 | 55 | 51 | |
SA4-N45L | A4 | 45° – OL | De 30 à 60 | Normal | 88 | 47 | 55 | 85 | |
SA4-N60S | A4 | 60° – OT | De 40 à 70 | Normal | 86 | 47 | 55 | 45 | |
SA4-N60L | A4 | 60° – OL | De 40 à 70 | Normal | 83 | 47 | 55 | 68 | |
SA5-0L | A5 | 0° – OL | De −30 à 30 | Normal | 38 | 45 | 55 | 20 | |
SA5-N45S | A5 | 45° – OT | De 40 à 60 | Normal | 57 | 47 | 55 | 37 | |
SA5-N60S | A5 | 60° – OT | De 40 à 70 | Normal | 46 | 43 | 55 | 25 | |
SA5-N60L | A5 | 60° – OL | De 40 à 70 | Normal | 39 | 50 | 55 | 41 | |
SA10-0L | A10 | 0° – OL | De −30 à 30 | Normal | 25 | 23 | 40 | 20 | |
SA10-N55S | A10 | 55° – OT | De 40 à 70 | Normal | 23 | 23 | 40 | 14 | |
SA10-N60L | A10 | 60° – OL | De 40 à 70 | Normal | 26 | 23 | 40 | 30 | |
SA11-0L | A11 | 0° – OL | De −30 à 30 | Normal | 35 | 23 | 40 | 23 | |
SA11-N55S | A11 | 55° – OT | De 40 à 70 | Normal | 41 | 23 | 40 | 29 | |
SA11-N60L | A11 | 60° – OL | De 40 à 70 | Normal | 43 | 23 | 40 | 53 | |
SA12-0L | A12 | 0° – OL | De −30 à 30 | Normal | 58 | 23 | 40 | 20 | |
SA12-N55S | A12 | 55° – OT | De 40 à 70 | Normal | 73 | 45 | 40 | 45 | |
SA12-N60L | A12 | 60° – OL | De 40 à 70 | Normal | 61 | 23 | 40 | 53 | |
SA14-0L | A14 | 0° – OL | De −30 à 30 | Normal | 80 | 23 | 40 | 20 | |
SA14-N55S | A14 | 55° – OT | De 40 à 70 | Normal | 96 | 23 | 40 | 49 | |
SA15-N60S | A15 | 60° – OL | De 40 à 70 | Normal | 18 | 22 | N/A | 12 | |
SA16-N55S | A16 | 55° – OT | De 40 à 70 | Normal | 85 | 31 | 40 | 44 | |
SA31-0L | A31 | 0° – OL | De −30 à 30 | Normal | 40 | 30 | 40 | 20 | |
SA31-N55S | A31 | 55° – OT | De 40 à 70 | Normal | 49 | 30 | 40 | 32 | |
SA31-N60L | A31 | 60° – OL | De 40 à 70 | Normal | 39 | 30 | 40 | 31 | |
SA32-0L | A32 | 0° – OL | De −30 à 30 | Normal | 50 | 30 | 40 | 20 | |
SA32-N55S | A32 | 55° – OT | De 40 à 70 | Normal | 62 | 30 | 40 | 33 | |
SA32-N60L | A32 | 60° – OL | De 40 à 70 | Normal | 56 | 30 | 40 | 43 | |
SAWS1-N60S | AWS1 | 60° – OT | De 40 à 70 | Normal | 45 | 38 | N/A | 32 | |
SAWS1-0L | AWS1 | 0° – OL | De −30 à 30 | Normal | 38 | 38 | N/A | 40 | |
SNW1-0L | NW1 | 0° – OL | N/A | Normal | 66 | 32 | 32 | 22 | |
SNW1-0L-AQ25 | NW1 | 0° – OL | N/A | Normal | 71 | 40 | 40 | 37 | |
SNW1-0L-AQ25-WR | NW1 | 0° – OL | N/A | Normal | 93 | 40 | 40 | 39 | |
SNW1-0L-IHC-C | NW1 | 0° – OL | N/A | Normal | 66 | 32 | 32 | 22 | |
SNW2-0L | NW2 | 0° – OL | N/A | Normal | 26 | 32 | 32 | 22 | |
SNW2-0L-AQ25 | NW1 | 0° – OL | N/A | Normal | 31 | 40 | 40 | 37 | |
SNW2-0L-AQ25-WR | NW1 | 0° – OL | N/A | Normal | 53 | 40 | 40 | 39 | |
SNW3-0L | NW3 | 0° – OL | N/A | Normal | 130 | 32 | 32 | 22 | |
SNW3-0L-AQ25 | NW1 | 0° – OL | N/A | Normal | 135 | 40 | 40 | 37 | |
SNW3-0L-AQ25-WR | NW1 | 0° – OL | N/A | Normal | 157 | 40 | 40 | 39 | |
SPWZ1-0L | PWZ1 | 0° – OL | De −30 à 30 | Normal | 75 | 30 | 40 | 20 | |
SPWZ1-N55S | PWZ1 | 55° – OT | De 40 à 70 | Normal | 87 | 30 | 40 | 45 | |
SPWZ3-0L | PWZ3 | 0° – OL | De −30 à 30 | Normal | 40 | 30 | 40 | 20 | |
SPWZ3-N55S | PWZ3 | 55° – OT | De 40 à 70 | Normal | 65 | 30 | 40 | 38 | |
SPWZ3-N60L | PWZ3 | 60° OL | De 40 à 70 | Normal | 64 | 30 | 40 | 35 | |
* Largeur avec option IHC ajoutée au sabot |
Diamètre extérieur du tuyau
po | Étendue de courbure | ||
Minimum
mm (po) |
Maximum
mm (po) | ||
Type de sabot : SA1, SA2, SA3, SA4, SA5, SPWZ1, SPWZ3, SI1, SI2, SI3 | |||
2 | 45.7 (1.8) | 50.8 (2) | |
2,25 | 50.8 (2) | 57.1 (2.25) | |
2,5 | 57.1 (2.25) | 63.5 (2.5) | |
3 | 63.5 (2.5) | 76.2 (3) | |
3,25 | 76.2 (3) | 82.5 (3.25) | |
3,5 | 82.5 (3.25) | 88.9 (3.5) | |
4 | 88.9 (3.5) | 101.6 (4) | |
4,5 | 101.6 (4) | 114.3 (4.5) | |
5 | 114.3 (4.5) | 127.0 (5) | |
6 | 127.0 (5) | 152.4 (6) | |
7 | 152.4 (6) | 177.8 (7) | |
8 | 177.8 (7) | 203.2 (8) | |
10 | 203.2 (8) | 254.0 (10) | |
12 | 254.0 (10) | 304.8 (12) | |
16 | 304.8 (12) | 406.4 (16) | |
22 | 406.4 (16) | 555.8 (22) | |
30 | 558.8 (22) | 762.0 (30) | |
Plat | 762.0 (30) | Jusqu’à plat | |
Type de sabot : SA10*, SA11*, SA12*, SA14*, SA31, SA32 | |||
2,375 | 50.8 (2) | 60.3 (2.375) | |
2,875 | 60.3 (2.375) | 73.0 (2.875) | |
3,5 | 73.0 (2.875) | 88.9 (3.5) | |
4 | 88.9 (3.5) | 101.6 (4) | |
4,5 | 101.6 (4) | 114.3 (4.5) | |
5,563 | 114.3 (4.5) | 141.3 (5.563) | |
6,625 | 141.3 (5.563) | 168.3 (6.625) | |
8,625 | 168.3 (6.625) | 219.0 (8.625) | |
10,75 | 219.0 (8.625) | 273.0 (10.75) | |
12,75 | 273.0 (10.75) | 323.8 (12.75) | |
16 | 323.8 (12.75) | 406.4 (16) | |
24 | 406.4 (16) | 609.6 (24) | |
Plat | 609.6 (24) | Jusqu’à plat | |
Type de sabot : ST et SPE | |||
2 | 44.4 (1.75) | 50.8 (2) | |
2,25 | 50.8 (2) | 51.7 (2.25) | |
2,5 | 57.1 (2.25) | 63.5 (2.5) | |
3 | 63.5 (2.5) | 76.2 (3) | |
3,5 | 76.2 (3) | 88.9 (3.5) | |
4 | 88.9 (3.5) | 101.6 (4) | |
5 | 101.6 (4) | 127.0 (5) | |
6 | 127.0 (5) | 152.4 (6) | |
8 | 152.4 (6) | 203.2 (8) | |
12 | 203.2 (8) | 304.8 (12) | |
16 | 304.8 (12) | 406.4 (16) | |
22 | 406.4 (16) | 558.8 (22) | |
Plat | 555.8 (22) | Jusqu’à plat | |
* Pour les diamètres inférieurs à 4 po, les options IHC sont intégrées au Rexolite, et les sabots ne sont pas compatibles avec les anneaux IHC. Les sabots plats peuvent être utilisés pour l’inspection de tuyaux d’un diamètre extérieur supérieur à 12,75 po. |
Paramètres du sabot avec l’OmniScan | |
X | Décalage sur l’axe primaire |
Y | Décalage sur l’axe secondaire (0 quand la sonde est centrée) |
Z | Hauteur |
Paramètres du sabot avec TomoView | |
XT | Décalage du milieu du premier élément sur l’axe primaire (mm) |
Y | Décalage du milieu du premier élément sur l’axe secondaire (mm) [mesuré à partir du côté du sabot] |
Z | Hauteur au milieu du premier élément (mm) |
You are being redirected to our local site.