Inspection & Measurement Systems
ポータブル超音波／渦流探傷器
ウェッジ
Advantages
- Available in standard refracted angles of 0°, 45°, 55°, and 60° in steel for angle-beam inspections from 30° to 70°, SW or LW
- Stainless steel screw receptacles provide a firm anchoring of probes to wedges.
- Lateral electronic scanning replaces the hand-skewing movement (with lateral wedges).
- The IHC wedge option can be ordered to improve the quality of the inspection: irrigation, mounting holes for the wedge holder to work with any Olympus scanner, and carbide pins to increase wear resistance.
- Wedges are designed to perform manual or automated scans.
- Custom wedges with specific refracted angles can be ordered; wedge shape and contour can also be customized.
| Part Number | Item Number | Probe Type |
Nominal Refracted Beam Angle
(in Steel) | Recommended Sweep (°) | Probe Orientation | Wedge Dimensions (mm) | |||
| L | W | W* | H | ||||||
| SA00-0L | U8720002 | A00 | 0° LW | −30 to 30 | Normal | 16 | 12 | N/A | 12 |
| SA00-N45S | U8720006 | A00 | 45° SW | 30 to 60 | Normal | 21 | 12 | N/A | 13 |
| SA00-N60S | U8720008 | A00 | 60° SW | 45 to 70 | Normal | 21 | 14 | N/A | 13 |
| SA0-0L | U8720004 | A0 | 0° LW | −30 to 30 | Normal | 23 | 12 | N/A | 11 |
| SA0-N45S | U8720012 | A0 | 45° SW | 30 to 60 | Normal | 32 | 18 | N/A | 20 |
| SA0-N60S | U8720014 | A0 | 60° SW | 45 to 70 | Normal | 32 | 18 | N/A | 21 |
| SA1-0L | U8720016 | A1 | 0° LW | −30 to 30 | Normal | 29 | 30 | 10 | 20 |
| SA1-N60S | U8720036 | A1 | 60° SW | 30 to 70 | Normal | 30 | 30 | 40 | 16 |
| SA1-N60L | U8720032 | A1 | 60° LW | 45 to 70 | Normal | 28 | 30 | 40 | 21 |
| SA1-L45S | U8720024 | A1 | 45° SW | −30 to 30 | Lateral | 45 | 35 | 45 | 27 |
| SA2-0L | U8720082 | A2 | 0° LW | −30 to 30 | Normal | 65 | 30 | 40 | 20 |
| SA2-N60L | U8720135 | A2 | 60° LW | 30 to 70 | Normal | 79 | 30 | 40 | 50 |
| SA2-N55S | U8720096 | A2 | 55° SW | 30 to 70 | Normal | 69 | 30 | 40 | 43 |
| SA3-0L | U8720139 | A3 | 0° LW | −30 to 30 | Normal | 38 | 37 | 50 | 20 |
| SA3-N45S | U8720143 | A3 | 45° SW | 30 to 60 | Normal | 55 | 37 | 50 | 30 |
| SA3-N45L | U8720141 | A3 | 45° LW | 30 to 60 | Normal | 55 | 37 | 50 | 49 |
| SA3-N60S | U8720147 | A3 | 60° SW | 45 to 70 | Normal | 58 | 37 | 50 | 32 |
| SA3-N60L | U8720145 | A3 | 60° LW | 45 to 70 | Normal | 53 | 37 | 50 | 40 |
| SA4-0L | U8720149 | A4 | 0° LW | −30 to 30 | Normal | 59 | 47 | 55 | 20 |
| SA4-N45S | U8720153 | A4 | 45° SW | 30 to 60 | Normal | 90 | 47 | 55 | 51 |
| SA4-N45L | U8720151 | A4 | 45° LW | 30 to 60 | Normal | 88 | 47 | 55 | 85 |
| SA4-N60S | U8720157 | A4 | 60° SW | 45 to 70 | Normal | 86 | 47 | 55 | 45 |
| SA4-N60L | U8720155 | A4 | 60° LW | 45 to 70 | Normal | 83 | 47 | 55 | 68 |
| SA5-0L | U8720159 | A5 | 0° LW | −30 to 30 | Normal | 38 | 45 | 55 | 20 |
| SA5-N45S | U8720163 | A5 | 45° SW | 30 to 60 | Normal | 57 | 47 | 55 | 37 |
| SA5-N60S | U8720169 | A5 | 60° SW | 45 to 70 | Normal | 46 | 43 | 55 | 25 |
| SA5-N60L | U8720167 | A5 | 60° LW | 45 to 70 | Normal | 39 | 50 | 55 | 41 |
| SA10-0L | U8720544 | A10 | 0° LW | −30 to 30 | Normal | 25 | 23 | 40 | 20 |
| SA10-N55S | U8720545 | A10 | 55° SW | 30 to 70 | Normal | 23 | 23 | 40 | 14 |
| SA10-N60L | U8720546 | A10 | 60° LW | 30 to 70 | Normal | 26 | 23 | 40 | 30 |
| SA11-0L | U8720553 | A11 | 0° LW | −30 to 30 | Normal | 35 | 23 | 40 | 23 |
| SA11-N55S | U8720547 | A11 | 55° SW | 30 to 70 | Normal | 41 | 23 | 40 | 29 |
| SA11-N60L | U8720548 | A11 | 60° LW | 30 to 70 | Normal | 43 | 23 | 40 | 53 |
| SA12-0L | U8720549 | A12 | 0° LW | −30 to 30 | Normal | 62 | 23 | 40 | 20 |
| SA12-N55S | U8720550 | A12 | 55° SW | 30 to 70 | Normal | 58 | 23 | 40 | 23 |
| SA12-N60L | U8720551 | A12 | 60° LW | 30 to 70 | Normal | 61 | 23 | 40 | 53 |
| SA14-0L | U8721079 | A14 | 0° LW | −30 to 30 | Normal | 80 | 23 | 40 | 20 |
| SA14-N55S | U8720997 | A14 | 55° SW | 30 to 70 | Normal | 96 | 23 | 40 | 49 |
| SA15-N60S | U8721094 | A15 | 60° LW | 35 to 70 | Normal | 18 | 22 | N/A | 12 |
| SA16-N55S-IHC | U8721469 | A16 | 55° SW | 30 to 70 | Normal | 85 | 31 | 40 | 44 |
| SAWS1-N60S | U8720552 | AWS1 | 60° SW | 45 to 70 | Normal | 45 | 38 | N/A | 32 |
| SAWS1-0L | U8720706 | AWS1 | 0° LW | -30 to 30 | Normal | 38 | 38 | N/A | 40 |
| SNW1-0L | U8700264 | NW1 | 0° LW | N/A | Normal | 66 | 32 | 32 | 22 |
| SNW1-0L-WP5 | U8720637 | NW1 | 0° LW | N/A | Normal | 66 | 32 | 32 | 22 |
| SNW1-0L-IHC-C | U8700266 | NW1 | 0° LW | N/A | Normal | 66 | 32 | 32 | 22 |
| SNW2-0L | U8720924 | NW2 | 0° LW | N/A | Normal | 26 | 32 | 32 | 22 |
| SNW2-0L-WP5 | U8720596 | NW2 | 0° LW | N/A | Normal | 26 | 32 | 32 | 22 |
| SNW3-0L | U8721184 | NW3 | 0° LW | N/A | Normal | 130 | 32 | 32 | 22 |
| SNW3-0L-WP5 | U8721219 | NW3 | 0° LW | N/A | Normal | 130 | 32 | 32 | 22 |
| SPWZ1-0L | U8700336 | PWZ1 | 0° LW | -30 to 30 | Normal | 75 | 30 | 40 | 20 |
| SPWZ1-N55S REV-C | U8700336 | PWZ1 | 55° SW | 30 to 70 | Normal | 87 | 30 | 40 | 45 |
| SPWZ3-0L | U8700361 | PWZ3 | 0° LW | -30 to 30 | Normal | 40 | 30 | 40 | 20 |
| SPWZ3-N55S | U8700365 | PWZ3 | 55° SW | 30 to 70 | Normal | 65 | 30 | 40 | 38 |
| SPWZ3-N60L | U8721399 | PWZ3 | 60° LW | 45 to 70 | Normal | 64 | 30 | 40 | 35 |
| *: Width with IHC wedge option | |||||||||
|
External Pipe Diameter
in. | Curvature Range | |
|
Minimum
mm (in.) |
Maximum
mm (in.) | |
| Wedge Type: SA1, SA2, SA3, SA4, SA5, SPWZ1, SPWZ3, SI1, SI2, SI3 | ||
| 2 | 45.7 (1.8) | 50.8 (2) |
| 2.25 | 50.8 (2) | 57.1 (2.25) |
| 2.5 | 57.1 (2.25) | 63.5 (2.5) |
| 3 | 63.5 (2.5) | 76.2 (3) |
| 3.25 | 76.2 (3) | 82.5 (3.25) |
| 3.5 | 82.5 (3.25) | 88.9 (3.5) |
| 4 | 88.9 (3.5) | 101.6 (4) |
| 4.5 | 101.6 (4) | 114.3 (4.5) |
| 5 | 114.3 (4.5) | 127.0 (5) |
| 6 | 127.0 (5) | 152.4 (6) |
| 7 | 152.4 (6) | 177.8 (7) |
| 8 | 177.8 (7) | 203.2 (8) |
| 10 | 203.2 (8) | 254.0 (10) |
| 12 | 254.0 (10) | 304.8 (12) |
| 16 | 304.8 (12) | 406.4 (16) |
| 22 | 406.4 (16) | 555.8 (22) |
| 30 | 558.8 (22) | 762.0 (30) |
| Flat | 762.0 (30) | up to flat |
| Wedge Type: SA10, SA11, SA12, SA14 | ||
| 2.375 | 50.8 (2) | 60.3 (2.375) |
| 2.875 | 60.3 (2.375) | 73.0 (2.875) |
| 3.5 | 73.0 (2.875) | 88.9 (3.5) |
| 4 | 88.9 (3.5) | 101.6 (4) |
| 4.5 | 101.6 (4) | 114.3 (4.5) |
| 5.563 | 114.3 (4.5) | 141.3 (5.563) |
| 6.625 | 141.3 (5.563) | 168.3 (6.625) |
| 8.625 | 168.3 (6.625) | 219.0 (8.625) |
| 10.75 | 219.0 (8.625) | 273.0 (10.75) |
| 12.75 | 273.0 (10.75) | 323.8 (12.75) |
| Flat | 323.8 (12.75) | up to flat |
| Wedge Type: ST and SPE | ||
| 2 | 44.4 (1.75) | 50.8 (2) |
| 2.25 | 50.8 (2) | 51.7 (2.25) |
| 2.5 | 57.1 (2.25) | 63.5 (2.5) |
| 3 | 63.5 (2.5) | 76.2 (3) |
| 3.5 | 76.2 (3) | 88.9 (3.5) |
| 4 | 88.9 (3.5) | 101.6 (4) |
| 5 | 101.6 (4) | 127.0 (5) |
| 6 | 127.0 (5) | 152.4 (6) |
| 8 | 152.4 (6) | 203.2 (8) |
| 12 | 203.2 (8) | 304.8 (12) |
| 16 | 304.8 (12) | 406.4 (16) |
| 22 | 406.4 (16) | 558.8 (22) |
| Flat | 555.8 (22) | up to flat |
Wedge Offset Parameters
How to Find the Wedge Parameters
- Find the appropriate wedge in either the OmniScan or TomoView Wedge Database. Parameters are automatically set once the wedge model is chosen.
- If the wedge is not already in the database, you may download the latest database update from the Service & Support section of www.olympus-ims.com.
- Enter the parameters manually using the values provided on the Wedge Specification Sheet accompanying the wedge.
- Call your local sales representative.
Wedge Curvature Conventions
| Wedge parameters with OmniScan | |
| X | Primary offset |
| Y | Secondary offset (0 when probe is centered) |
| Z | Height |
| Wedge parameters with TomoView | |
| X T | Primary axis offset of the middle of the first element (mm) |
| Y | Secondary axis offset of the middle of the first element (mm) (measured from the side of the wedge) |
| Z | Height at the middle of the first element (mm) |
Loading...
