Introduction to Phased Array Using the OmniScan MX2 - Part Three

Part three of the series will cover gate and C-scan configurations for weld inspection, calibration options and limitations, and include explanation and demonstration of the OmniScan MX2 calibration wizards for manual inspection.

There will be a brief review of the previous Webinar that leads into the current topics. This will combine sector scan basics, and MX2 displays readings, and parameters in preparation for a manual sector scan weld inspection.

Part three of the series will cover gate and C-scan configurations for weld inspection, calibration options and limitations, and include explanation and demonstration of the OmniScan MX2 calibration wizards for manual inspection. There will be a brief review of the previous Webinar that leads into the current topics. This will combine sector scan basics, and MX2 displays readings, and parameters in preparation for a manual sector scan weld inspection.

웨비나-옴니스캔 MX2를 사용하는 위상 배열에 대한 소개-3부내레이션 언어 :English

OmniScan MX2 Product Overview

옴니스캔 MX2 제품 개요내레이션 언어 :English사용 가능한 자막 :Chinese, English, French, German, Italian, 日本語, Portuguese, Russian, Spanish

Showcasing the MX2, Cobra scanner, NDT Setup Builder, and OmniPC for advanced NDT work flow process.

용접 검사용 옴니스캔 MX2 용접 검사 워크플로내레이션 언어 :English사용 가능한 자막 :Chinese, English, French, German, Italian, 日本語, Portuguese, Russian, Spanish

다음에 대해 자세히 알아보기 :선택옴니스캔 MX2Go

Part three of the series will cover gate and C-scan configurations for weld inspection, calibration options and limitations, and include explanation and demonstration of the OmniScan MX2 calibration wizards for manual inspection. There will be a brief review of the previous Webinar that leads into the current topics. This will combine sector scan basics, and MX2 displays readings, and parameters in preparation for a manual sector scan weld inspection.

이 비디오에 소개된 제품 또는 솔루션에 대한 질문이 있으십니까?

연락처