Introduction to Phased Array Using the OmniScan MX2 - Part One

Olympus invites you to the first part of a Webinar series introducing the participant to phased array inspection using the Olympus OmniScan MX2, Olympus probes, wedges, and accessories. Part one of the series will cover the essential ingredients of phased array and basic theory. It is geared toward understanding the equipment basics used to generate phased array inspections and includes the introduction to the OmniScan MX2 software user interface. Instrument module configurations, probe and wedge information, and basic beam forming concepts for a single sector scan group typical of manual inspection are explained while learning how those parameters are entered and controlled in the OmniScan MX2 software.

Part one of the series will cover the essential ingredients of phased array and basic theory. It is geared toward understanding the equipment basics used to generate phased array inspections and includes the introduction to the OmniScan MX2 software user interface.

웨비나-옴니스캔 MX2를 사용하는 위상 배열에 대한 소개-1부내레이션 언어 :English

OmniScan MX2 Product Overview

옴니스캔 MX2 제품 개요내레이션 언어 :English사용 가능한 자막 :Chinese, English, French, German, Italian, 日本語, Portuguese, Russian, Spanish

Showcasing the MX2, Cobra scanner, NDT Setup Builder, and OmniPC for advanced NDT work flow process.

용접 검사용 옴니스캔 MX2 용접 검사 워크플로내레이션 언어 :English사용 가능한 자막 :Chinese, English, French, German, Italian, 日本語, Portuguese, Russian, Spanish

다음에 대해 자세히 알아보기 :선택옴니스캔 MX2Go

Part one of the series will cover the essential ingredients of phased array and basic theory. It is geared toward understanding the equipment basics used to generate phased array inspections and includes the introduction to the OmniScan MX2 software user interface.

이 비디오에 소개된 제품 또는 솔루션에 대한 질문이 있으십니까?

연락처