Evident LogoOlympus Logo
洞见博客

Inspecting Stainless Steel Pipes for Corrosion without Using X-rays

作者  -

Corrosion Pitting Detection

The stainless steel pipes commonly used on offshore platforms are susceptible to corrosion and must be regularly inspected. For decades, radiography was the primary method used to detect corrosion in these pipes, but as regulations governing the use of X-rays continue to tighten, radiographic testing (RT) is no longer permitted in some countries.

Eddy current is an excellent alternative to detect and evaluate corrosion pitting depth in the 300 series stainless steel commonly used on offshore platforms.

Figure 1. An OmniScan MX flaw detector with a corrosion probe and a stainless steel standard.
 

The Benefits of Eddy Current Array for Sub-Surface Inspection as Compared to Radiography

Eddy current array (ECA) is much faster than radiography. Rather than having to secure the inspection area for a period of time and limit employee access, ECA enables users to simply scan the component they’re inspecting, even if it’s painted. There are no chemicals involved. And since ECA doesn’t utilize radiation, there are no restrictions about people working nearby while the inspection is taking place.

ECA provides results nearly instantly with intuitive, easy-to-understand imaging. Not only can inspectors use ECA to spot corrosion in the stainless steel pipes, they can also evaluate the depth of the defects for more robust results. The results are traceable and are easily saved and recalled later for post-process analysis and comprehensive reporting.

Reliable Corrosion Detection Depth Measurement

Using ECA technology for corrosion detection keeps the surface preparation to a minimum.

Figure 2. A C-Scan image of corrosion pitting.
 

To evaluate the depth of corrosion, we developed a depth estimation tool using the vertical amplitude and the phase angle.

Figure 3. A C-Scan image showing the depth corrosion measurement.
 

Conclusion

Using ECA technology for corrosion detection and depth sizing is a quick and cost-effective solution to inspect pipes.

The inspector only needs to travel to the pipe once and then make four passes with the instrument to scan each pipe section. No paint stripping, no harsh chemicals, and no radiation mean the job gets done quickly while intuitive C-scan images with depth estimation provide robust data that are easily archived or put into reports.

Also check out:

3 Benefits of Our Stress Corrosion Cracking Solution Over Penetrant/Magnetic Testing
Eddy Current Array Tutorial
Webinar: Advantages of Eddy Current Array over Magnetic Particle/Penetrant Testing for Inspecting the Surface of Carbon Steel Welds


Get In Touch
Product Leader, Eddy Current Product Line

Since 2012, Ghislain Morais has been an eddy current and bond testing product leader for Evident. He is responsible for the global support of conventional eddy current, eddy current array, conventional bond testing, and bond testing C-scan technology. Prior to joining us, he spent 18 years working in the aircraft maintenance business as a metallurgist and in NDT inspections. He has experience and certifications in several of the NDT methods that are used in the aerospace industry.

六月 6, 2017
Sorry, this page is not available in your country
InSight Blog Sign-up
Sorry, this page is not available in your country
Let us know what you're looking for by filling out the form below.
Sorry, this page is not available in your country