• Single or multipoint thickness measurements
• Connects up to 8 transducers
• User selectable: number of channels, channel sequencing, and channel rate
• Uses contact, delay line, and immersion transducers
• Transducer frequency range 2 MHz - 30 MHz
• Wide thickness range, from 0.080 mm - 500 mm (0.003 in. to 20 in.) depending on application
• Resolution up to 0.001 mm(0.0001 in.)
• A-scan display for waveform verification
• Application Auto-Recall with stored standard and custom setups
• Alphanumeric file-based datalogger stores 18,000 thickness readings or 1,750 waveforms
• Handheld, intuitive operation, long battery life
|
Number of Channels: 1 to 8, user selectable
Channel Switching Rate: 1, 2, 4, 8, 16, or 20 Hz, user selectable
Size: 3.2 in. x 5.9 in. x 1.25 in.(149.9 mm x 81.3 mm x 31.8 mm)
Weight: 7.7oz. (.22 kg)
Multipoint Thickness Measurements
Connected to the optional MX-8 multiplexer, the 25MX PLUS has the ability to collect and display thickness measurements from up to 8 separate transducers.
Special software on the 25MX PLUS
allows the user to select:
• Number of channels (1-8)
• Mux Mode
- Off
- Single Channel (manual switching)
- Single Sequence (switch through selected channels on command)
- Sequence (continuous channel switching)
• Channel Rate (1, 2, 4, 8, 16 or 20 Hz; thickness output and channel number)
Single Thickness Measurements
The 25MX PLUS operates as a 'standard' precision thickness gage when not connected to the MX-8 Multiplexer.
|
Measurements| Mode 1:
|
Time interval between excitation pulse and first backwall echo, using contact transducers.
| | Mode 2: |
Time interval between the first interface echo after the excitation pulse and the first backwall echo, using delay line or immersion transducers.
| | Mode 3: |
Time interval between successive backwall echoes following the first interface echo after the excitation pulse, using delay line or immersion transducers.
|
Thickness Measurement Range:
Steel: 0.006 - 20.000 inches
(0.150 - 508.00 mm)
Plastic: 0.003 - 2.0000 inches
(0.080 -50.00 mm)
Thickness range depends on material, transducer, surface condition, temperature, and set up selected.
Material Velocity Range:
0.02000 - 0.55110 inch/µS
(0.5080 - 13.9979 mm/µS)
Resolution: Keypad Selectable:
|
LOW:
|
0.01"
|
0.1 mm
| |
STANDARD:
|
0.001"
|
0.01 mm
| |
HIGH:
|
0.0001"
|
0.001 mm
|
Battery: 6 V Rechargeable NiMH battery pack, or field-replaceable alkaline AA batteries
Battery Life: 40 hours in normal measurement mode with backlight off
Fast-Charger: Four-hour Fast Charger with universal voltage
Auto Power Off: On or off
Transducer Frequency Range:
2-30 MHz (-3 dB)
Operating Temperature:
-10° C to +50° C (+14° F to 122°F)
Keypad: Sealed color-coded keypad with tactile and audible feedback
Case: Impact-resistant and Water-resistant, gasketed Lexan® case with sealed connectors. Environmental IP-65 compliant
Metric/English Units
Min/Max Mode
Two Alarm Modes: Programmable Hi-Low Alarm with audible and visual indicators.
1) Standard Hi-Low
2) Previous thickness
-Absolute
-Percentage
Two Differential Modes:
1) Thickness difference between actual measurement and reference value.
2) Percent difference between actual measurement and reference value.
Application Auto-Recall: Automatically adjusts internal parameters and zero offset for a wide variety of transducers.
Stored Standard Setups: 25 stored transducer setups to allow fast, easy calibration for our standard transducers.
Stored Custom Setups: Up to 35 stored custom transducer setups for best performance in special applications.
Size: 9.375 in. x 5.45 in. x 1.5 in.
(238 mm x 138 mm x 38 mm)
Weight: 2.1 lbs. (0.95 kg)
INTERNAL DATALOGGER
Datalogger and RS-232: Identifies, stores, recalls, clears, and transmits thickness readings, waveform images, and gage setup information via the RS-232 Serial Port. Baud Rate, Word Length, Stop Bits, and Parity are adjustable from the keypad.
Maximum # of Stored Values: | Standard: |
18,000 thickness readings or 1,750 waveforms with thickness
| | Upgrade 1: |
36,000 thickness readings or 3,400 waveforms with thickness
| | Upgrade 2: |
54,000 thickness readings or 5,100 waveforms with thickness
| | Location Codes: |
8-character file name plus 16-character alphanumeric location code input. Multiple comments per location.
| | File Structures: |
7 standard or custom application-specific file structures
| | Reports: |
On-gage reporting of: Summary with statistics, Min/Max with locations, and File Comparison. On-screen comparison of current and previous readings.
|
DISPLAY
Display: Liquid Crystal Display with backlight. Contrast keypad adjustable. Display area 4.0 in. x 3.39 in. (102 mm x 86 mm)
Backlight, Zoom Mode, Freeze Mode and Hold/Blank
Rectification: RF, half wave positive or negative, and full wave
Waveform Display Range and Delay Control
Standard inclusions
Model 25MX PLUS Digital Ultrasonic Thickness Gage, AC or Battery Operation, 50-60 Hz, with Internal Alphanumeric Datalogger. Including: Universal Quick Charger/AC Adapter Transducer Cable, Test Block, Couplant, RS-232 I/O Cable, Carrying Case, Instruction Manual and Two Year Limited Warranty
Optional Accessories| MX8 |
MX-8 Multiplexer
| | PLUS/RPC |
Rubber Protective Pouch with Neck Strap
| | 36DLP/SPC/KIT |
Protective Pouch with Neck Strap
| | GageView |
Interface Program
| | 25DLP/EW |
Extended Limited Warranty, 3rd Year
| | 2214E |
5-Step Test Block, 1018 steel, English Units: .100", .200", .300", .400", .500"; metric available
| | 2213E |
5-Step Test Block, Aluminum, English Units: .100", .200", .300", .400", .500"; metric available
| | 6DLPLUS/HDC |
Heavy Duty Shipping Case
|
Please contact us for other accessories available with the Model 25MX PLUS.
*All specifications are subject to change without notice.
Some 25MX PLUS Applications
We are sorry, we could not find an Application Note matching your search criteria. |
The Panametrics 25MX PLUS is an ultrasonic precision thickness gage that provides cost-effective solutions in applications where the opposite side of the test material is difficult or impossible to reach. Multipoint and single thickness measurements can be made on a wide variety of materials including metal, plastic, rubber, glass, fiberglass, and composites.