Evident LogoOlympus Logo
Wsparcie Klienta

25MX PLUS

Discontinued Products

The Panametrics 25MX PLUS is an ultrasonic precision thickness gage that provides cost-effective solutions in applications where the opposite side of the test material is difficult or impossible to reach. Multipoint and single thickness measurements can be made on a wide variety of materials including metal, plastic, rubber, glass, fiberglass, and composites.

Features

• Single or multipoint thickness measurements
• Connects up to 8 transducers
• User selectable: number of channels, channel sequencing, and channel rate
• Uses contact, delay line, and immersion transducers
• Transducer frequency range 2 MHz - 30 MHz
• Wide thickness range, from 0.080 mm - 500 mm (0.003 in. to 20 in.) depending on application
• Resolution up to 0.001 mm(0.0001 in.)
• A-scan display for waveform verification
• Application Auto-Recall with stored standard and custom setups
• Alphanumeric file-based datalogger stores 18,000 thickness readings or 1,750 waveforms
• Handheld, intuitive operation, long battery life

MX-8 Multiplexer

Number of Channels: 1 to 8, user selectable
Channel Switching Rate: 1, 2, 4, 8, 16, or 20 Hz, user selectable
Size: 3.2 in. x 5.9 in. x 1.25 in.(149.9 mm x 81.3 mm x 31.8 mm)
Weight: 7.7oz. (.22 kg)

Multipoint Thickness Measurements
Connected to the optional MX-8 multiplexer, the 25MX PLUS has the ability to collect and display thickness measurements from up to 8 separate transducers.
Special software on the 25MX PLUS
allows the user to select:
• Number of channels (1-8)
• Mux Mode
- Off
- Single Channel (manual switching)
- Single Sequence (switch through selected channels on command)
- Sequence (continuous channel switching)
• Channel Rate (1, 2, 4, 8, 16 or 20 Hz; thickness output and channel number)
Single Thickness Measurements
The 25MX PLUS operates as a 'standard' precision thickness gage when not connected to the MX-8 Multiplexer.

Sorry, this page is not available in your country
Let us know what you're looking for by filling out the form below.
Sorry, this page is not available in your country