Software utility to upgrade EPOCH 1000 Series embedded software. Instructions and firmware included

EPOCH 1000 Series v1.2.0.10 Updates and Improvements:

Software utility to upgrade EPOCH 600 embedded software. Instructions and firmware included.

EPOCH 600 v1.12 Updates and Improvements:

Important: These installation files include a new language file that must be imported to the instrument. Please follow the instructions in the README file enclosed in this upgrade package for further information.

Software utility to upgrade EPOCH LTC embedded software. Instructions and firmware included.

Software utility to upgrade EPOCH XT embedded software. Instructions and firmware included.

EPOCH XT v1.2.0.10 Updates and Improvements:

Software Additions and Improvements

Please contact Olympus NDT (800-225-8330) for information about how to upload GageView Version 5.3.0

Portable ultrasonic flaw detector (GageView Pro) PC interface program.

Download memo for new revision upgrade instructions for preexisting customers.

Compatible with the following PC operating systems:

Olympus i-SPEED high speed video, latest Camera software update - version V3.16

Olympus i-SPEED 1GB high speed video, latest Camera software update - version V1.07

Olympus i-SPEED LT high speed video, latest Camera software update - version V1.01

Olympus i-SPEED 2 high speed video, latest Camera software update - version V5.33

Please contact your local Olympus representative for updates to the i-SPEED TR, i-SPEED 3 and i-SPEED FS cameras.

Viewer software provides playback, processing, editing and saving functions for i-SPEED video files.

i-SPEED Viewer Control / Control-Pro (PC Software) - Please be advised that updates are available under the Software 'Help' menu - 'Check for Updates'. An internet connection is required.

Please be advised that updates are available under the software 'Help' menu - 'check for updates'. An internet connection is required.

Please be advised that updates are available under the software 'Help' menu - 'check for updates'. An internet connection is required.

Please be advised that updates are available under the software 'Help' menu - 'check for updates'. An internet connection is required.

Thumbnail viewing, file management and post-stereo measurement of captured images with the IPLEX FX, IPLEX LX, IPLEX LT,IPLEX MX II,IPLEX YS and IPLEX II R series can be conducted on your PC with the IPLEX Viewer Plus software. Highly accurate image measurement can be performed by zooming in your intended points in an image from 2x to 4x. From version 3.0, information adding and editing feature on captioned images is available.

System requirements:

-Windows® XP, 2000, Vista or Windows 7 (32 bit version).
-RAM: 512 MB or more (when the OS is Windows XP or Windows 2000), 1 GB or more (when the OS is Windows Vista or Windows 7).
-512MB of available hard-disk space or more.
-CD-ROM drive or CF card slot or PC card slot required. USB Port.
-1024 x 768 or a larger display.

The IPLEX Viewer Plus instruction manual can be downloaded with the software.

This is the latest software update for FX products - version 2.20.
List of products applicable for the new firmware: IV8000-2 IV8420-2, IV8435-2, IV8620-2, IV8635-2 IV8650-2, IV8675-2 IV8635X1-2

For details with regards to the update procedure, please refer to the file "Readme IPLEX FX v2.20 Software Update".

This is the latest software update for IPLEX LX and LT products - version 1.33A.

List of products applicable for the new firmware:
IV8420L1, IV8435L1, IV8620L1, IV8635L1
IV8420L2, IV8435L2, IV8620L2, IV8635L2
IV8675L1, IV8835L1, IV88100L1, IV88200L1
IV8835L1, IV88100L2, IV88200L2

For details with regards to the update procedure, please refer to the file "Readme IPLEX LX-LT v1.33A Software Update English".

This is the latest software update for IPLEX UltraLite - version 1.20A.

List of products applicable for the new firmware:
IV8420U, IV8435U, IV8620U, IV8635U

For details with regards to the update procedure, please refer to the file "README UltraLite v1.20A Software Update English.txt".

This is the latest software update for MX II products - version 1.12A.
List of products applicable for the new firmware: IV8415M, IV8430M, IV8630M

For details with regards to the update procedure, please refer to the file "Readme IPLEX MX II v1.12A Software Update English".

1. Information on resolution for measurement has been added.
2. French and German Help files have been added.
Note: The IPLEX MANAGER needs to be installed before adding help files.

i-SAVE 2.2 Firmware update

1. General

This software will update your current version of [BX2-BSW] program. [BX2-BSW Ver.03.01], [BX2-BSW Ver.03.02], [BX2-BSW Ver.03.03] or [BX2-BSW Ver.03.04] can be updated to [BX2-BSW Ver.03.04a]. *You can confirm your [BX2-BSW] version by booting up the [BX2-BSW] program and clicking [Help]-[Version info]. You can also confirm it printed on the label of the CD-ROM [BX2-BSW]. *You cannot update the other versions of [BX2-BSW] with this software. Correspondence OS: Windows7 Ultimate (32bit/64bit) *Software runs on Windows7 64bit OS via 32bit compatibility mode (WOW64)

2. Software Modifications

• Main modifications of the [BX2-BSW Ver.03.04](Ver.03.04a)
  • New installer for Windows7 Ultimate (32bit/64bit).
  • Software runs on Windows7 64bit OS via 32bit compatibility mode (WOW64).
  • Applicable OS is only Windows7
  • For another OS, click Ver.03.04
• Main modifications of the [BX2-BSW Ver.03.03](Ver.03.04)
  • Response to Windows Vista Business (32-bit), Windows XP Professional (SP2) as the OS instead of Windows 2000.
  • Addition of the objective lenses for UIS2 series. See the list.
  • Update of the mirror list. See the list.
  • The file format of the help file was changed. Then, the option menu of help dialog was deleted.
  • The bug of the error code display was fixed.
• Main modifications of the [BX2-BSW Ver.03.02] (Ver.03.03)
  • Optimization of the passive AF parameter for the UMPLFL objective lenses
  • Addition of the objective lenses for UIS2 series and "UPLFL 40X O" objective lens to the list

• Main modifications of the [BX2-BSW Ver.03.01] (Ver.03.02)
  • Response to Windows 2000(SP3), Windows XP Pro (SP1) as the OS instead of Windows 2000 , Windows ME and PocketPC.
  • Change "C:\BX2" into "C:\Program Files\BX2-BSW" as the default folder for installation
  • Change the construction of the folders below

3. Installation procedure

1. Before installation
   • This software comes with an "OLYMPUS END-USER LICENSE AGREEMENT". Prior to downloading the software, please read the OLYMPUS END-USER LICENSE AGREEMENT for sure. When downloading begins, it automatically assumes that you agreed to this AGREEMENT.
2. Download
   • Please enter all the required (*) fields in order to download the software.

     Olympus uses your personal information for the following purposes only:
     (1) to provide services and support regarding our products;
     (2) to provide information on our products and services; and
     (3) to gather statistical information regarding our product.
     We may disclose your personal information to our affiliates for the above purposes after obtaining their promise to observe above mentioned use covenant. Other than as provided above, we will not disclose your personal information to third parties except as required by laws and regulations.

3. Installation procedure
   1. We strongly recommend that you exit all Windows programs.
   2. Insert the CD-ROM [BX2-BSW Ver.03.01], [BX2-BSW Ver.03.02], [BX2-BSW Ver.03.03] or [BX2-BSW Ver.03.04] to the CD-ROM drive.
      *In case of booting up the older version of installer, please click [Cancel] to stop the procedure.
   3. Double click the file [BX2-BSW_VER0304A.exe] you saved in the folder in procedure "2. Download".
   4. Installer will boot up. Proceed with the installation in accordance with the installer instructions.
      * If the CD-ROM [BX2-BSW Ver.03.01], [BX2-BSW Ver.03.02], [BX2-BSW Ver.03.03] or [BX2-BSW Ver.03.04] is not inserted to the CD-ROM drive, it is not possible to install the upgrading basic software [BX2-BSW Ver.03.04a].

      Note: Before Installation
      The software cannot be installed unless the user account is registered as "Computer Administrator". If the user account is registered as a "Restricted Account", change it to the "Computer Administrator" account. (For the user account registration, refer to the instruction manual for your PC)

4. Verification of version
   • When the installation is complete, boot up BX2-BSW program and click [Help]-[Version Info]. If the software has been loaded properly, "BX2 Ver.03.04" will appear for BX2 interface.
   • In addition, there is description of Windows7 about applicable OS on help [Introduction of BX2A and BX2MA] - [Features of the BX2 Motorized System Microscope] about applicable OS.

1. General

This software will update your current version of [BX2-BSW] program. [BX2-BSW Ver.03.01], [BX2-BSW Ver.03.02] or [BX2-BSW Ver.03.03] can be updated to [BX2-BSW Ver.03.04]. *You can confirm your [BX2-BSW] version by booting up the [BX2-BSW] program and clicking [Help]-[Version info]. You can also confirm it printed on the label of the CD-ROM [BX2-BSW]. *You cannot update the other versions of [BX2-BSW] with this software. Correspondence OS: Windows Vista Business (32-bit)/ Windows XP Professional (SP2) (Windows 2000 is not supported.)

2. Software Modifications

• Main modifications of the [BX2-BSW Ver.03.03](Ver.03.04)
  • Response to Windows Vista Business (32-bit), Windows XP Professional (SP2) as the OS instead of Windows 2000.
  • Addition of the objective lenses for UIS2 series. See the list.
  • Update of the mirror list. See the list.
  • The file format of the help file was changed. Then, the option menu of help dialog was deleted.
  • The bug of the error code display was fixed.
• Main modifications of the [BX2-BSW Ver.03.02] (Ver.03.03)
  • Optimization of the passive AF parameter for the UMPLFL objective lenses
  • Addition of the objective lenses for UIS2 series and "UPLFL 40X O" objective lens to the list
• Main modifications of the [BX2-BSW Ver.03.01] (Ver.03.02)
  • Response to Windows 2000(SP3), Windows XP Pro (SP1) as the OS instead of Windows 2000 , Windows ME and PocketPC.
  • Change "C:\BX2" into "C:\Program Files\BX2-BSW" as the default folder for installation
  • Change the construction of the folders below

3. Installation procedure

1. Before installation
   • This software comes with an "OLYMPUS END-USER LICENSE AGREEMENT". Prior to downloading the software, please read the OLYMPUS END-USER LICENSE AGREEMENT for sure. When downloading begins, it automatically assumes that you agreed to this AGREEMENT.
2. Download
   • Please enter all the required (*) fields in order to download the software.

     Olympus uses your personal information for the following purposes only:
     (1) to provide services and support regarding our products;
     (2) to provide information on our products and services; and
     (3) to gather statistical information regarding our product.
     We may disclose your personal information to our affiliates for the above purposes after obtaining their promise to observe above mentioned use covenant. Other than as provided above, we will not disclose your personal information to third parties except as required by laws and regulations.

3. Installation procedure
   1. We strongly recommend that you exit all Windows programs.
   2. Insert the CD-ROM [BX2-BSW Ver.03.01], [BX2-BSW Ver.03.02] or [BX2-BSW Ver.03.03] to the CD-ROM drive.
      *In case of booting up the older version of installer, please click [Cancel] to stop the procedure.
   3. Double click the file [BX2-BSW_VER0304.exe] you saved in the folder in procedure "2. Download".
   4. Installer will boot up. Proceed with the installation in accordance with the installer instructions.
      * If the CD-ROM [BX2-BSW Ver.03.01], [BX2-BSW Ver.03.02] or [BX2-BSW Ver.03.03] is not inserted to the CD-ROM drive, it is not possible to install the upgrading basic software [BX2-BSW Ver.03.03].

      Note: Before Installation
      The software cannot be installed unless the user account is registered as "Computer Administrator". If the user account is registered as a "Restricted Account", change it to the "Computer Administrator" account. (For the user account registration, refer to the instruction manual for your PC)

4. Verification of version
   • When the installation is complete, boot up BX2-BSW program and click [Help]-[Version Info]. If the software has been loaded properly, "BX2 Ver.03.04" will appear for BX2 interface.

1. General

This software will update to the D21-CB Ver. 01.02.03.44.
Applicable D21-CB : To check serial number of D21-CB. If the bottom of the number is from [A0] to [A3], it is possible to update.

2. Software Modifications

• Modification to below bugs
  • When the 3 points circle measurement is used, there are some cases which the result number is not correct.
  • There are some cases which the measurement result is displayed not 1.000 mm but 1000 um when it is 1.000 mm.

3. Installation procedure

1. Before installation
   • This software comes with an "OLYMPUS END-USER LICENSE AGREEMENT". Prior to downloading the software, please read the "OLYMPUS END-USER LICENSE AGREEMENT". When downloading begins, it automatically assumes that you have agreed to this AGREEMENT.
2. Download
   • Please enter all the required (*) fields below in order to download the software.
   • Click the [Download] button to begin the download .
     * Download file name: [DP21SAL010244.zip] (2,678KB)
     * Please download the [DP21SAL010244.zip] file in your USB flash memory. (**)
     * Serial number is the alphanumeric characters indicated on your DP21-CU. (See the figures below.) The number printed here is the serial number.
     
     **More 40MB free disk space require in the USB flash memory. If there are other files in the USB flash memory, please backup the files in advance.
     
     Olympus uses your personal information for the following purposes only:
     (1) to provide services and support regarding our products;
     (2) to provide information on our products and services; and
     (3) to gather statistical information regarding our product.
     We may disclose your personal information to our affiliates for the above purposes after obtaining their promise to observe above mentioned use covenant. Other than as provided above, we will not disclose your personal information to third parties except as required by laws and regulations.
3. Update procedure
   • Melt the file "DP21SAL010244.zip" which you saved in the USB flash memory in the route directory the 1st partition.
   • The following files are unarchiveed.
     ■ DP21BSW_SETUP0102.exe (35KB)
     ■ DP21BSW_SETUP010201.exe (35KB)
     ■ DPUpdateTool.ini(1KB)
     ■ Readme.txt(1KB)
     ■ AppUpdate.bat(1KB)
     ■ Folder\Release(6.43MB)
   • About detail of update procedure, please see here.
4. Verification of version
   • When the update is complete, place the cursor on [MAINTENANCE] in the MENU display and press the [OK] button.
   • Place the cursor on [VER…] and press the [OK] button.
   • If you see "Ver. 01.02.03.44" in the DPE-BSW, the update is properly completed.
     

1. General

This software will update to the D21-CU Ver.01.02.04
Applicable DP2-CU :

• DP21 camera head which is used with D21-CB(DP21 control box)
• To check serial number of DP21 camera head. If the bottom of the number is [A0], It is possible to update.

2. Software Modifications

• Main modifications D21-CU Ver.01.02.04
  • Modification to the improper display of the level meter of "Focus Indicator" at 800X600 resolution live image

3. Installation procedure

1. Before installation
   • This software comes with an "OLYMPUS END-USER LICENSE AGREEMENT". Prior to downloading the software, please read the "OLYMPUS END-USER LICENSE AGREEMENT". When downloading begins, it automatically assumes that you have agreed to this AGREEMENT.
2. Download
   • Please enter all the required (*) fields below in order to download the software.
   • Click the [Download] button to begin the download .
     * Download file name: [DP21CU010204.zip] (575KB)
     * Please download the [DP21CU010204.zip] file in your USB flash memory. (**)
     * Serial number is the alphanumeric characters indicated on your DP21-CU. (See the figures below.) The number printed here is the serial number.
     
     **More 40MB free disk space require in the USB flash memory. If there are other files in the USB flash memory, please backup the files in advance.
     
     Olympus uses your personal information for the following purposes only:
     (1) to provide services and support regarding our products;
     (2) to provide information on our products and services; and
     (3) to gather statistical information regarding our product.
     We may disclose your personal information to our affiliates for the above purposes after obtaining their promise to observe above mentioned use covenant. Other than as provided above, we will not disclose your personal information to third parties except as required by laws and regulations.
3. Update procedure
   • Melt the file "DP21CU010204.zip" you saved in the USB flash memory in the route directory the 1st partition.
   • The following files are unarchiveed.
     ■ DP21BSW_SETUP0102.exe (35KB)
     ■ DP21BSW_SETUP010201.exe (35KB)
     ■ DPUpdateTool.ini(1KB)
     ■ AppUpdate.bat(1KB)
     ■ dp21_firm_v010204_fpga_v010102.bin(1,025KB)
     ■ FUT4DP.exe(296KB)
   • About detail of update procedure, please see here.
4. Verification of version
   • When the update is complete, place the cursor on [MAINTENANCE] in the MENU display and press the [OK] button.
   • Place the cursor on [VER…] and press the [OK] button.
   • If you see "Ver. 01.02.04" in the Camera Firmware, the update is properly completed.
     
     *Read "OLYMPUS END-USER LICENSE AGREEMENT" before downloading.
     *An entry form for necessary information will appear.

1. General

This software will update to the D21-CB Ver.01.02.01.42.
Applicable DP2-CB : To check serial number of DP2-CB. If the bottom of the number is [A0],[A1] and [A2], It is possible to update.

2. Software Modifications

• Main modifications of the D21-CB Ver.01.02.01.42.
  • "Poly-line" was added in the measurement functions.
  • The maximum number of corners in the polygon area and the boundary length was increased to 100 points
  • The displayed measure in measurement result was changed from "mm " to "auto indication "mm" and "µm" .
  • The displayed number of digits in measurement result was changed as below.
    ■ Length: the fourth place of decimals → four significant digits
    ■ Area: the eighth place of decimals → seven significant digits
    ■ Angle: the fourth place of decimals → five significant digits

The above updates have made it possible to acquire DP2-TWAIN images using ImageGear by Accusoft Pegasus.

3. Installation procedure

1. Before installation
   • This software comes with an "OLYMPUS END-USER LICENSE AGREEMENT". Prior to downloading the software, please read the "OLYMPUS END-USER LICENSE AGREEMENT". When downloading begins, it automatically assumes that you have agreed to this AGREEMENT.
2. Download
   • Please enter all the required (*) fields in order to download the software.
   • Click the [Download] button to begin the download .
     * Download file name: [DP21SAL010242.zip] (2,678KB)
     * Please download the [DP21SAL010242.zip] file in your USB flash memory. (**)
     * Serial number is the alphanumeric characters indicated on your DP21-CU. (See the figures below.) The number printed here is the serial number.
     
     

     **More 20MB free disk space require in the USB flash memory. If there are other files in the USB flash memory, please backup the files in advance.

3. Update procedure
   • Melt he file "DP21SAL010242.zip" you saved in the USB flash memory in the route directory the 1st partition.
   • The following files are unarchiveed.
     ■ DP21BSW_SETUP0102.exe (35KB)
     ■ DP21BSW_SETUP010201.exe (35KB)
     ■ DPUpdateTool.ini(1KB)
     ■ Readme.txt(1KB)
     ■ AppUpdate.bat(1KB)
     ■ Folder\Release(6.43MB)
   • About detail of update procedure, please see here.
4. Verification of version
   • When the update is complete, place the cursor on [MAINTENANCE] in the MENU display and press the [OK] button.
   • Place the cursor on [VER…] and press the [OK] button.
   • If you see "Ver. 01.02.01.42" in the DPE-BSW, the update is properly completed.
     
5. Download the manual
   • Please download the manual of the modifications of Ver.01.02.01.42 from here.

1. General

This device driver enables the operation of DP72 on Windows Vista 64-bit Editions.

Please install following procedure (The detailed installation procedure is as shown below.).

1. Install PCI Express I/F board
2. Install the device driver
3. Install the software DP2-BSW

Unless this procedure is followed, the software cannot be installed correctly.

2. Software Modifications

• Main modifications for DP72.
  • Windows Vista Business/Ultimate 64-bit Editions compatible

3. Installation procedure

1. Before installation
   • This software comes with an "OLYMPUS END-USER LICENSE AGREEMENT". Before downloading the software, please read the "OLYMPUS END-USER LICENSE AGREEMENT". When downloading begins, it automatically assumes that you agreed to this AGREEMENT.
2. Download
   • Please enter all the required (*) fields in order to download the software.
   • Click the [Download] button to begin the download and save it on Desktop.
     * Download file name: [DP72x64DeviceDriverV01.exe] (1.86MB)
     Please use the number printed here for the "Serial No.".
     
3. Device Driver Installation procedure
   1. Double click the file [DP72x64DeviceDriverV01.exe] you saved in the folder in above procedure [2. Download] to open it.
   2. Read installation details.
   3. If the installation of the device driver is not finished correctly and the exclamation mark is displayed on the icon in the [Device Manager], please see "here" for details.
4. DP2-BSW Installation procedure
   1. Install the [DP2-BSW Ver.2.1 or later] after installation of the device driver. Please refer to Installation Manual to confirm how to install [DP2-BSW Ver2.1] or later.
      

      * Do not operate your mouse wheel on running DP2-BSW. When you use mouse wheel, the display image may be zoomed out. (It does not affect the image data.)

      * The software cannot be installed unless the user account is registered as a "Computer Administrator".
      If the user account is registered as a "Restricted Account", change it to a "Computer Administrator" account.
      (For the user account registration, refer to the instruction manual for your PC.)

1. General

This device driver enables the operation of DP71 on Windows Vista 64-bit Editions.

Please install following procedure (The detailed installation procedure is as shown below.).

1. Install PCI I/F board
2. Install the device driver
3. Install the software DP-BSW or DP2-BSW

Unless this procedure is followed, the software cannot be installed correctly.

2. Software Modifications

• Main modifications for DP71.
  • DP2-BSW Ver.2.1 or later compatible
  • 4 GB more memory compatible

3. Installation procedure

1. Before installation
   • This software comes with an "OLYMPUS END-USER LICENSE AGREEMENT". Before downloading the software, please read the "OLYMPUS END-USER LICENSE AGREEMENT". When downloading begins, it automatically assumes that you agreed to this AGREEMENT.
2. Download
   • Please enter all the required (*) fields below in order to download the software.
   • Click the [Download] button to begin the download and save it on Desktop.
     * Download file name: [MalAd0403x64.exe] (1.42MB)
     * Serial No. : This Serial No. is the alphanumeric characters indicated on your DP71 camera head (see below).
     Please use the number printed here for the "Serial No.".
     
3. Device Driver Installation procedure
   1. Double click the file [MALAD0403x64.exe] you saved in the folder in above procedure [2. Download] to open it. The file related with the device driver can be extracted.
   2. In the [Device Manager], select the [Other devices] and select the [Update Device Software]. Select the folder which is exacted at 2), and then follow the messages to install the device driver.
   3. Read installation details.
   4. If the installation of the device driver is not finished correctly and the exclamation mark is displayed on the icon in the [Device Manager], please see "here" for details.
4. DP-BSW or DP2-BSW Installaiton Procedure
   1. Install the [DP-BSW Ver3.3] or [DP2-BSW Ver.2.1 or later] after installation of the device driver. Please refer to "here" to confirm how to install [DP-BSW Ver3.3]. Please refer to Installation Manual to confirm how to install [DP2-BSW Ver2.1 or later].
      

      * The software cannot be installed unless the user account is registered as a "Computer Administrator".
      If the user account is registered as a "Restricted Account", change it to a "Computer Administrator" account.
      (For the user account registration, refer to the instruction manual for your PC.)

Older versions of DP25 camera drivers do not support Sleep mode of Windows Vista and Windows XP. This modification program updates your DP25 camera driver to the version that supports Sleep mode.
* "Sleep Mode" means the Sleep/Hibernate state of Windows Vista and the Stand-by/Hibernate state of Windows XP.

How to distinguish products requiring updating

If the version of your DP25 camera driver file "mv40dcam.sys" is 2.1.0027 or before, download this modification program and update your camera driver.
You can check your "mv40dcam.sys" version as follows:
For Windows Vista
(1)Right-click on [Start] - [Computer] and click [Properties] in the submenu shown.

(2)The following dialog box will appear. Click [Device Manager].

(3)The following dialog box will appear. Click the [Continue] button.

(4)Device Manager will appear. Double-click "OLYMPUS CORPORATION, camera core developed by SOFTHARD Technology…" just below Imaging Device.

(5)Click the [Driver Details] button in the [Driver] tab of Device Manager.

(6)Select "mv40dcam.sys" and check the file version. If the file version is 2.1.0027 or before, your camera driver needs to be updated.

For Windows XP
(1)Right-click on [Start] - [My Computer] and click [Properties] in the submenu shown.

(2)System properties will appear. Click the [Device Manager] button in the [Hardware] tab.

(3)Device Manager will appear. Double-click "OLYMPUS CORPORATION FireWire Camera…" just below Imaging Device.

(4)Click the [Driver Details] button in the [Driver] tab of Device Manager.

(5)Select "mv40dcam.sys" and check the file version. If the file version is 2.1.0027 or before, your camera driver needs to be updated.

About the changes

The program supports the Sleep/Hibernate state of Windows Vista and the Stand-by/Hibernate state of Windows XP.

Downloading the modification program

1. Before downloading This software comes with an "OLYMPUS END-USER LICENSE AGREEMENT". Please read this before downloading the software. When downloading begins, it is automatically assumed that you have consented to this AGREEMENT.
2. File downloading procedure
   (1)Click the [Download] button at the bottom of this page.
   * File name to download: "DP25DrvUDV11_e.zip" (7,538KB)

   (2)After the [File Download] dialog box appears, click the [Save] button to download the file.
   Save it in any folder such as the desktop of the PC to be used with the DP25.

   (3)Unzip the saved file "DP25DrvUDV11_e.zip" on the desktop.

   (4)The manual for this modification program, "DP25CameraDriverUpdateManual_e.pdf", is in the unzipped folder "DP25CameraDriverUpdateV11_e". Read this manual and update your DP25 camera driver as described.
   *Read "OLYMPUS END-USER LICENSE AGREEMENT" before downloading.

1. General

We found that noises were displayed on the acquired image when the digital color camera DP25 was used with some PC.
At this time, we prepared the update program to solve this phenomenon. In case that this defect is found, please kindly update the DP25 control software using this program.

2. Object Product

cellSens, DP2-BSW, DP2-TWAIN interface and DP25-TWAIN Interface which controls DP25.
* It applied to all versions for cellSens, DP2-BSW, DP2-TWAIN interface and DP25-TWAIN Interface.

3. Defect Phenomenon

Noises were displayed on the acquired image as below when the digital color camera DP25 was used in combination with certain PCs.

4. Defect Factor

Noises may occur on the image acquired by DP25 in combination with certain PCs when the CPU utilization rate is decreased. You will be able to solve this defect by enhancing the CPU utilization rate for using DP25.

5. Solution

Please download the update program and update the DP25 control software so that the defect is solved.
You may have a combination with PC which can not solve the defect condition even if you execute this update program. Please confirm here about the test results at our company. Please note that your PC may not always be listed in "list of compatible PC models for Digital Color Camera DP25"

6. Update program

This program updates cellSens, DP2-BSW and DP25TWAIN interface controlling DP25.
*Even after this update program was executed, it is not related to the version update for the DP25 control software (cellSens, DP2-BSW and DP25TWAIN interface) that you are currently using.

7. About Update

Problems on cases that use DP25 in combination with certain PCs were fixed.

8. Installation procedure

1.Before installation
This update program comes with an "OLYMPUS END-USER LICENSE AGREEMENT". Prior to downloading the software, please read the OLYMPUS END-USER LICENSE AGREEMENT. When downloading begins, it automatically assumes that you agreed to this Agreement.

2.Download
(1) Click the [Download] button at the bottom of this page.
* Download file name: "DP25_SU_v1-4.exe"(6,864KB)
(2) Dialog [download file]will appear. Please save it to a folder in your PC which is used with DP25.
(3) Double click on the file "DP25_SU_v1-4.exe" you saved in the procedure to boot up.
(4) The update program will boot up. Following the instruction of this program, please continue to update.
(5) About detail of update, please see here.
*Read "OLYMPUS END-USER LICENSE AGREEMENT" before downloading.

Revision history
The update program was changed from "DP25_SU_v1-3.exe" to "DP25_SU_v1-4.exe" as of June 4, 2009.
The update program was changed from "DP25_SU_DLLv255.exe" to "DP25_SU_v1-3.exe" as of September 1, 2008.

1. General

WindowsXP SP3 modification program for the DP25

Some models of the DP25 do not support WindowsXP SP3(For details, please see here.). If you want to use such DP25 with WindowsXP, you must downgrade your IEEE1394 device driver to an older version. This modification program will change the IEEE1394 device driver updated by WindowsXP SP3 to an older version.

If you change the IEEE1394 device driver using this modification program, some unexpected faults may occur; for example, other IEEE1394 devices may not function normally. It is therefore strongly recommended that, after downgrading the IEEE1394 device driver, you avoid using any other IEEE1394 devices with that PC.

2. Installation procedure

1. Before installation
Before downloading this modification program, read the Program Copyright Notice and License Agreement. By downloading this modification program, you are indicating your consent to these terms.

2. Download
(1) Please enter all the required (*) fields below in order to download the software.
(2) Click on the [Download] button at the bottom of this page.
* Name of the file to download: [DP25RBv12_e.zip] (3,083KB)
(3) When the [File Download] dialog box is displayed, click the [Save] button to download the file to the Desktop or other folder of the PC you selected to use with your DP25.
(4) Unzip the saved "DP25RBv12_e.zip" file on the Desktop.
(5) You will find the procedure to apply this modification program file, "DP25IEEE1394RollBackManual_e.pdf," in the unzipped folder, "DP25IEEE1394RollBack_e." Follow the procedure given in the pdf file and change your IEEE1394 device driver.

This software is the installer for DP25 TWAIN interface "Ver1.4". If you need to import captured images by DP25 via the TWAIN interface, install it. If the old version (ver1.1, ver1.2) was installed, update the DP25 TWAIN interface to ver1.4.

* To use the TWAIN interface, the special application software which supports TWAIN is needed.
* You can confirm your DP25TWAIN version according to the following procedure.
Boot up the TWAIN interface. Click [Settings]-[Information]-[System information]. You can see your version in [Application]-[Product Version].

About modifications

Main modifications when the version is changed from Ver1.2 to Ver1.4.
·Windows Vista(32bit) compatible

* The word "T5" will appear next to the connector as below. The only DP25 Camera Head, which is operable under Windows Vista, is the one which has "T5" as below.

The other Camera Head than the above needs to update the firmware with charge. About the detail, you should contact the distributor.

Main modification from Ver1.1 to Ver1.2.
·Problems on the White Balance area were fixed.
·Problems on the Shading compensation were fixed.

Installation

1. Before installation
This software comes with an "OLYMPUS END-USER LICENSE AGREEMENT". Prior to downloading the software, please read the OLYMPUS END-USER LICENSE AGREEMENT. When downloading begins, it automatically assumes that you agreed to this AGREEMENT.

2. Download Procedure
(1) Click the [Download] button at the foot of this page.
* Download file name: "DP25TWAIN0104.exe" (53.2MB)
(2) When an entry form appears, enter all required fields.
* Serial number is the one indicated on your DP25 camera head. (See the figure below.) The number printed here is the serial number.

(3) Click the [Download] button to start downloading.

3. Installation procedure

(1) Double click on the file "DP25TWAIN0104.exe" you saved in the procedure 2 to open it.
(2) The installer will start. According to the installer instructions, carry on installation.
(3) About detail of installation, please see here.
* The software cannot be installed unless the user account is registered as "Computer Administrator". If the user account is registered as a "Restricted Account", change it to the "Computer Administrator" account. (For the user account registration, refer to the instruction manual for your PC.)

4. Verification of version

When the installation is complete, boot up the TWAIN interface. Click [Settings]-[Information]-[System information]. If you see "Ver1.4" in the [Application]-[Product Version], the installation is properly completed.

* Read "OLYMPUS END-USER LICENSE AGREEMENT" before downloading.
* An entry form for necessary information will appear.

1. General

This software will an installer of the DP2-TWAIN Ver.5.1 (Build 9464). And this software will update the DP2-TWAIN Ver4.1 or earlier to Ver.5.1 (Build 9464).

• To check your current version of DP2-TWAIN, start DP2-TWAIN and Click the [Acquisition Settings] icon and then click the [System info…] button. You can see your version in [Application]-[Product Version].

2. Software Modifications

• New Feature
  • * Added support for DP73
    {CAUTION} When using the DP73, use PC with Windows 7 Professional/Ultimate (64-bit).

3. Installation procedure

1. Before installation
   • This software comes with an "OLYMPUS END-USER LICENSE AGREEMENT". Prior to downloading the software, please read the "OLYMPUS END-USER LICENSE AGREEMENT". When downloading begins, it automatically assumes that you agreed to this AGREEMENT.
2. Download
   • Click the [Download] button at the foot of this page.
     *Download file name: [DP2TWAIN0501.zip] (579MB)
   • When an entry form appears, enter all required fields.
     *Serial number is the alphanumeric characters indicated on your DP21, DP26, DP25, DP72 or DP73 camera head. (See the figures below.) The number printed here is the serial number.
     DP21, DP26
     
     DP25
     
     DP72
     
     DP73
     
   • Click the [Start Download] button to start downloading.
3. Installation procedure
   • Uncompress zip file
     
   • Right-click on the icon and select [Extract All…] on pop-up menu.
     
   • Set Extract Files and click the [Extract] button.
     
   • The file is uncompressed and the folder is opened.
     
   • Double click on the file "setup.exe" in the folder.
     
   • The installer will start. According to the installer instructions, carry on installation.
   • About detail of installation, please see here.
   • The software cannot be installed unless the user account is registered as a "Computer Administrator".

     If the user account is registered as a "Restricted Account", change it to a "Computer Administrator" account. (For the user account registration, refer to the instruction manual for your PC.)

4. Verification of version
   • When the installation is complete, start DP2-TWAIN and click [Acquisition Settings] icon and click [System info…] button . If you see "5.1" in the [Application]-[Product Version], the installation has been properly completed.
     * Read "OLYMPUS END-USER LICENSE AGREEMENT" before downloading.
     * An entry form for necessary information will appear.

1. General

We found the less responsive in some operations, when the digital color camera DP73 was used with OLYMPUS Stream.
At this time, we prepared the update program to solve this phenomenon. Please kindly update OLYMPUS Stream by using this program.

2. Object Product
OLYMPUS Stream which controls DP73

3. Defect Phenomenon
The less response appears in the following operations when the digital color camera DP73 was used in combination with OLYMPUS Stream.

• White balance
• Black balance
• ISO sensitivity
• Manual exposure and so on

4. Solution
Please download the update program and update OLYMPUS Stream so that the response is improved.

5. Update program
This program updates OLYMPUS Stream controlling DP73.

*Even after this update program was executed, it is not related to the version update for the OLYMPUS Stream that you are currently using.

6. Installation Procedure
Before installation

This update program comes with an "OLYMPUS END-USER LICENSE AGREEMENT". Prior to downloading the software, please read the "OLYMPUS END-USER LICENSE AGREEMENT". When downloading begins, it automatically assumes that you have agreed to this AGREEMENT.

Download

1. Click the [Download] button to begin the download .
*Download file name: [DP73_LivePerformance_6-1-4-2_64bit.exe] (8116KB) {CAUTION} This download file is for only 64 bit operating system. Please check your operating system is 64bit before installation. If you use 32bit operation system, please contact to Olympus.

2. When an entry form appears, enter all required fields.

3. Click the [Download] button to start downloading.

4. Dialog [download file]will appear. Please save it to a folder in your PC which is used with DP73.

5. Double click on the file "DP73_LivePerformance_6-1-4-2_64bit.exe" you saved in the procedure to boot up.

6. The update program will boot up. Following the instruction of this program, please continue to update.

7. About detail of update, please see here. *Read "OLYMPUS END-USER LICENSE AGREEMENT" before downloading.

1. General

This software is viewer software for OLYMPUS Stream V1.7（Build 9481）.

2. Installation procedure

1. Before installation

This software comes with an "OLYMPUS END-USER LICENSE AGREEMENT". Prior to downloading the software, please read the OLYMPUS END-USER LICENSE AGREEMENT. When downloading begins, it automatically assumes that you have agreed to this AGREEMENT.

2.Download

(1) Click the [Download] button at the foot of this page.
*Download file name: [OLYMPUS Stream View 0107.zip] (345MB)

(2) When an entry form appears, enter all required fields.

(3) Click the [Download] button to start downloading.

3. Installation procedure

1. Uncompress zip file

2. Right-click on the icon and select [Extract All…] from the pop-up menu.

3. Set a Destination and click the [Extract] button.

4. The file is uncompressed and the folder is opened. And double click on the file "setup" in the folder.

5. The installer will start. Continue the installation following the installer instructions.

6. For details on the installation, please see here.

*The software cannot be installed unless the user account is registered as a "Computer Administrator".

If the user account is registered as a "Restricted Account", change it to a "Computer Administrator" account.

(For the user account registration, refer to the instruction manual for your PC.)

* Please read the "OLYMPUS END-USER LICENSE AGREEMENT" before downloading.

* An entry form for necessary information will appear.

Software for inspection data management.

See release notes.

Software for Eddy current data acquisition and viewing.

See release notes.

TubePro is a tube inspection and reporting software program.

Update to EddyMaster 500 allowing operation in Windows 7, Windows Vista and Window XP operating systems.

Update to Nortec 500 Series - includes firmware, upgrade utility and instructions

OmniPC is a computer-based software program that provides comprehensive data analysis capabilities of inspection data acquired with the OmniScan flaw detector. It provides several cost-savings advantages because analysis of inspection data is conducted on a computer rather than on the OmniScan.

The "Multilingual" zip file includes all languages and applications.

Please be advised that TomoView 2.7R12 will read OmniScan iXU files up to version 2.1R2. You will need TomoView 2.9 to view files produced with a more recent iXU application.

OmniScan iXU 2.1R18 (DE, EN, ES, FR, IT, JA, ZH).

See release notes.

The "Multilingual" zip file includes all languages and applications.

Please be advised that TomoView 2.7R12 will read OmniScan MXU files up to version 2.0R20, and MXU-M files up to version 2.1R2. You will need TomoView 2.9 to view files produced with a more recent MXU or MXU-M application.

See release notes.

MXU-M 2.2R5 (DE, EN, ES, FR, IT, JA, RU, ZH) - OmniScan Manual Testing software package.

MXU 2.0R27 (DE, EN, ES, FR, IT, JA, RU, ZH) - OmniScan MX software for the OmniScan Automated module (combines conventional UT and Phased Array technology in one software).

MXE 2.1R1 (EN) - OmniScan Eddy Current software.

TomoView Control 1.7R7 (EN) - Enable control from TomoView 2.9R11 software.

The "Multilingual" zip file includes all languages and applications.

See release notes.

Launcher 1.2R7 (DE, EN, ES, FR, IT, JA, RU, ZH).

MXU 3.1R3 (DE, EN, ES, FR, IT, JA, RU, ZH) - OmniScan MX2 software for the OmniScan Automated module (combines conventional UT and Phased Array technology in one software).

MXU-M 3.1R3 (DE, EN, ES, FR, IT, JA, RU, ZH) - OmniScan MX2 Manual Testing software package.

OSTV 3.0R3 (EN).

Software protection management utility.

See release notes.

Probe and wedge database updater for TomoView or OmniScan.

See release notes.

Automated ultrasonic inspection of pipeline girth welds using phased arrays. Version compatible with PipeWIZARD-V2 system only.

Automated ultrasonic inspection of pipeline girth welds using phased arrays, including Tomoview 2.8 and PipeWIZARD Viewer. Designed for PipeWIZARD-V4 system.

See release notes.

PipeWIZARD Viewer is an Olympus free software for phased array and ultrasonic PipeWIZARD 4.0 data viewing.

PipeWIZARD Viewer is an Olympus free software for phased array and ultrasonic PipeWIZARD 3.1 (and less) data viewing.

• Added the ability to turn off the Waveform. The waveform On/Off is now a selected in the Display Menu. Waveform On/Off can also be locked in the instrument lock.

Contact Olympus for information on uploading GageView (For Thickness Gages) Version 5.3.0

Important: Please uninstall Gageview 5.1.2 and Upgrade2010 Version 2.0.4 before installing the updated versions

The Standalone version of the TomoView Advanced Focal Law Calculator. It Contains the Acoustic Field simulation Module (AFiSiMo).

Remote control library developer's kit for:
- TomoView version 2.8 or higher
- MXU 2.0R2 or higher
- MXE 2.1R1 or higher

See release notes.

Data access library for developers.

See release notes.

Please be advised that the OmniScan Converter application is now considered a legacy product.

Please download the most recent version of TomoVIEWER to obtain the latest conversion capabilities.

Software for phased array and ultrasonic data acquisition and viewing.

See Release notes.

Note 1: Use last version of Keytool available on this page if you are experiencing problem with HASP key hardware protection after installing third-party tool.

Note 2: HASP USB key must be activated for TomoView 2.9: if not activated only the free TomoViewer Edition will be available.

TomoVIEWER™ is an Olympus free software for phased array and ultrasonic data viewing.

For TV27 users only, this new revision is required to support new OmniScan MX only (not MX2) delivered after May 2010 for data acquisition.

Please be advised that TomoView 2.7R12 will read OmniScan MXU files up to version 2.0R20, MXU-M files up to version 2.1R2O, and iXU files up to version 2.1R2. You will need TomoView 2.9 to view files produced with a more recent OmniScan application.