Evident LogoOlympus Logo
Wsparcie Klienta

Latest: STM7-BSW Ver 1.4.3 Installer

Latest: STM7-BSW Ver 1.4.3 Installer

■ Outline of software

This program is an installer of the control software STM7-BSW for the measuring microscope STM7.

※ If update from before version 1.3.2, use this installer after updating version 1.3.3. By installation via version 1.3.3, migration can be performed with adjustment values and operating environment compatibility.
※ You can check the product version in “Product version” in the [Help] menu in the application.

Changes

Supported operating environment has been changed.

Applicable products

STM7 or STM6 
* Excluding STM6-LM-F31(Device version number:A6 or less) and STM6-LM-F35 (Device version number: A4 or less)

System Configurations

OS:                       Windows10 Pro/Pro for Workstations 64bit (English/Japanese)
                             (Version 2004/20H2/21H1/21H2/22H2)
                             Windows11 Pro/Pro for Workstations 64bit (English/Japanese)
                             (Version 21H2/22H2/23H2)
                             (PC (Operability confirmed):made by HP Z2 SFF G5 / Z2 SFF G9)

PC specifications: When using DP23/DP28: 
                             CPU: Intel® CORE i5 or more
                             RAM: 8GB or more (16GB (8GB x 2 Dual channel) are recommended.)
                             When using DP22/DP27/STM7-CU: 
                             CPU Intel® CORE i3 Processors 3GHz or more
                             RAM:  4GB or more

Applicable Office: Microsoft® Excel® 2013/2016/2019/2021/365(SAC) (64bit)

■ Download procedures

1.Before installation

OLYMPUS END-USER LICENSE AGREEMENT” is included in this program. Please read it carefully before downloading the program. If you start downloading, you shall be deemed to have consented to the terms and conditions in “OLYMPUS END-USER LICENSE AGREEMENT”.

2.Download

  1. Select the file to be downloaded in the right area of the page.
  2. Press the [Download] button to start downloading.
  3. The downloaded file is compressed in ZIP format, so copy it to the desktop of your controller PC and decompress it.

※ You can decompress the compressed file by 1) Select the ZIP file you copied to your desktop, 2)  Rightclick the file to display the menu and 3) Select [Extract all].
※ The file configuration after decompression is shown below. 

¥ STM7-BSW Ver.1.4.3¥
│└ ¥STM7-BSW Ver.1.4.3¥
│   │  └ Setup.exe (Installer)
│   ├ en-US¥
│   ├ Inst¥
│   ├ ja-JP¥
│   └TroubleShooting¥

└ ReleaseNotes¥ (Release Notes)
   ├ en¥
   │ └ ReleaseNotes_of_STM7-BSW_Ver1.4.3_EN.pdf (English)
   └ jp¥
    └ ReleaseNotes_of_STM7-BSW_Ver1.4.3_JP.pdf (Japanese)

■Installation procedures 

  1. Disconnect the interface cable of USB which is connected to the license key or the camera from the USB port of controller PC.
  2. Uninstall STM7-BSW according to the procedures described in “2. Software Uninstallation” in “1. Setup” in User’s Manual provided with STM7-BSW. In this case, be sure to select “Save adjustment values”.  (※If you do not save them, you need to adjust each setting again.)
  3. Restart controller PC, and right-click Setup.exe (Installer) of the downloaded file. 
  4. Install STM7-BSW according to the procedures in and after Step 3 described in “1. Software Installation” in “1. Setup” in User’s Manual provided with STM7-BSW. In this case, be sure to select “Use last adjustment values”.  (※ If you do not use them, you need to adjust each setting again.)
  5. Restart controller PC, and connect the interface cable of USB which is connected to the license key or the camera to the USB port of controller PC. Be sure to connect it to the original port.
    (a) After the license key is connected, wait until the red lamp of the license key turns ON.
    (b) When using DP22, DP27, DP23, or DP28, after you connect the cable, wait until the blue lamp on the front of the camera turns ON.
    (c) When using STM7-CU, after you connect the cable, wait until Windows OS shows the popup message indicating that the installation of the camera driver is completed.
  6. Double-click the STM7-BSW icon on the desktop to start the application. 

■Cautions

(a) For other cautions, please refer to User’s Manual of STM7-BSW.
 

JęzykWersja
1.4.3

Have a question about a product or solution featured in this file?

Contact a Sales Rep

Sorry, this page is not available in your country
Let us know what you're looking for by filling out the form below.
Sorry, this page is not available in your country