在线研讨会 - 用于OmniScan MX2仪器的新版MXU V4.1软件与OmniPC的优势特点

OmniScan MX2 Product Overview

Tune in to this webinar and hear from our expert at Olympus on the latest solutions for the nondestructive testing of pipes and vessels for wall thickness loss due to corrosion or erosion. The HydroFORM and RexofFORM systems built for the OmniScan MX2 phased array flaw detector are designed to bring encoded corrosion mapping capability without the use of high-speed computer-based mechanical raster scanners.

Through the course of the Webinar participants will learn: Basic Corrosion Mapping Theory and Overview. Setup and Configuration of a 1D Linear Array Probe for 0 Degree Inspection. UT, Gate Logic, and C-scan Setup and Configuration for Corrosion Mapping 1 Axis and 2 Axis Mechanical Scanner Setup and Configuration Use of C-Scan Color Palette and Readings for Analysis of Defects Corrosion Mapping Report Generation in OmniScan MX2

Part two of the series will cover sector scan basics and introduction to the data views and displays commonly used in automated UT and phased array. This includes use of the OmniScan MX2 group setup wizards, and setup and configuration of the UT parameters.

This webinar is intended to demonstrate use of common crack sizing techniques and best practices for optimizing the OmniScan MX2 for manual and semi-automated crack detection and sizing.

Overview of the features of new OmniScan SX.