Inspection 360 is a series of webcasts discussing relevant industrial inspection applications and technical questions. Session topics cover a wide range of technologies, including conventional ultrasonic (UT) and phased array (PA) testing, X-ray fluorescence (XRF), remote visual inspection (RVI), and industrial microscopy.
Inspection 360: New & Noteworthy: Learn about MXU 5.7 and WeldSight 1.3
In this edition of Inspection 360, Curtis Dickinson will review recent feature additions to the OmniScan X3 from the MXU 5.7 update, as well as a demonstration of data exporting/reporting in the recently released WeldSight 1.3 software.
Inspection 360: How to use 3D Modeling to Improve Reliability of Difficult Videoscope Measurements
In this week's Inspection 360 session, learn how the IPLEX NX videoscope's 3D modeling feature can help improve the reliability and accuracy of your measurements.
Radiation Safety Practices for Handheld XRF Analyzers
Learn radiation safety practices for handheld XRF in this Inspection 360 video. X-Ray Specialist Michael Hull will discuss how to apply the basic protective measures of time, distance, and shielding to safely operate your XRF analyzer.
Ergonomic Microscopes, How Olympus Has Your Back!
In this Inspection 360 video, Megan Farell, PhD, Olympus Technical Sales Support Specialist, explains why proper ergonomics is critical in routine microscopy. Get tips on how to avoid discomfort and injury and maintain productivity when operating an industrial microscope.
How to Perform Technical Cleanliness Inspections Using One Easy System
Learn how to perform technical cleanliness inspections using the turnkey OLYMPUS CIX100 system. Expert Hamish Rossell will walk through image acquisition, particle analysis, reporting, data management, and system configuration.
How to Annotate and Manage Images on IPLEX™ Videoscopes
Learn about image annotation and management for IPLEX videoscopes in this remote visual inspection (RVI) installment of our Inspection 360 video series. Expert Charles Janecka will walk through how to organize, label, and add notes to videoscope images.
How to Perform Faster and More Productive TFM Inspections
While the total focusing method (TFM) can provide excellent images, TFM inspections often run at slower acquisition rates. Learn how to optimize TFM inspection speeds on the OmniScan™ X3 phased array flaw detector so you can be more productive.
Olympus Inspection 360: OmniScan™ X3 MXU 5.6 Software Update
In this Inspection 360 video, Brandon presents some of the new features and performance improvements implemented in the OmniScan™ X3 phased array flaw detector’s onboard software, MXU version 5.6
Olympus Inspection 360: Sorting Scrap Efficiently
In this Inspection 360 video, Michael Hull, Olympus Applications Scientist, offers time-saving tips for sorting scrap with X-ray fluorescence (XRF). Learn how to increase your sorting efficiency and avoid costly mix-ups using the fast, accurate, and easy-to-use Vanta™ XRF analyzer.
How to Streamline XRF Data Management and Reporting in PMI Inspections
Learn how to streamline XRF data management and reporting in PMI inspections during this Inspection 360 webcast. Michael Hull will share fast data collection methods, easy data export options, and efficient data reporting tips for your handheld XRF analyzer.
Reasons to Consider an Olympus Microscope Service Plan
Watch this Inspection 360 video to learn about Olympus’ preventative maintenance service plan offerings and how they can help you ensure the longevity of your microscope, keep it consistently performing at peak levels, and even enable Olympus to guarantee your microscope's measurement accuracy and precision.
How to Obtain the Best Image Quality Using Videoscopes
Learn how to achieve the best image quality using a videoscope in this Inspection 360 video. Remote visual inspection expert Charles Janecka will explain how to optimize tip adaptors, brightness settings, post processing, and more.