Rilevatore di difetti

Eddy Current High-resolution Probes

Quote Request

Domande?

Sonde_Tube_CF_Standard.psd

TEK/TEL - High Resolution | Attached/Detachable

The eddy current high-resolution probes are lightweight, but solidly built probes with the coils protected with a plastic sleeve and stainless steel wear guides at front and rear ends. Their narrow coils make them ideal for thin tubing inspection such as titanium tubing.

Overview

Features

Narrow coil, ideal for thin tubing inspection such as titanium tubing.
Lightweight, solidly built.
Coils protected by a plastic sleeve.
Stainless steel wear guides at the front and rear ends.

Standard/Custom Probes (Made to Order)

Use the nomenclature and the chart below to configure your part number.

Probe Type	Probe Diameter * (use mm in part ID)		Center Frequency	Cable Length (TEK only)**
	mm	in.
TEK: Attached TEL: Detachable Use with TEZ-BBS or TEZ-BBK cables.**	Standard TEK: 9.6 mm to 50 mm TEL: 11 mm to 50 mm by 0.2 mm Custom (TEK only) 50.2 mm to 100 mm	Standard TEK: 0.378 in. to 1.969 in. TEL: 0.433 in. to 1.969 in. by 0.008 in. Custom (TEK only): 1.976 in. to 3.937 in.	015 (Low) 050 (Mid) 250 (High) 600 (Very High)	15 m (50 ft) 20 m (65 ft) 30 m (100 ft)
**TEZ cable information for TEL probes is available in the Tube Inspection Probe Catalog.