Olympus is proud to present the latest software release for the OmniScan family of products: MXU V4.1.
This Webinar will include a presentation explaining the various new features and also include live demonstrations of data analysis using OmniPC and setup and acquisition using the OmniScan MX2.
Вебинар – Преимущества нового программного обеспечения MXU V4.1 для OmniScan MX2 и OmniPCNarration Language:English
OmniScan MX2 Product Overview
OmniScan MX: Настройка вихретоковых матриц для контроля качества авиаконструкцийNarration Language:EnglishSubtitles Available:Китайский, English, Французский, German, Italian, 日本語, Portuguese, Русский, Испанский
Tune in to this webinar and hear from our expert at Olympus on the latest solutions for the nondestructive testing of pipes and vessels for wall thickness loss due to corrosion or erosion. The HydroFORM and RexofFORM systems built for the OmniScan MX2 phased array flaw detector are designed to bring encoded corrosion mapping capability without the use of high-speed computer-based mechanical raster scanners.
Вебинар – Преимущества фазированных решеток для коррозионного мониторингаNarration Language:English
Through the course of the Webinar participants will learn:
Basic Corrosion Mapping Theory and Overview.
Setup and Configuration of a 1D Linear Array Probe for 0 Degree Inspection.
UT, Gate Logic, and C-scan Setup and Configuration for Corrosion Mapping
1 Axis and 2 Axis Mechanical Scanner Setup and Configuration
Use of C-Scan Color Palette and Readings for Analysis of Defects
Corrosion Mapping Report Generation in OmniScan MX2
Вебинар – OmniScan MX2: Коррозионный мониторинг и C-скан положенияNarration Language:English
Part two of the series will cover sector scan basics and introduction to the data views and displays commonly used in automated UT and phased array. This includes use of the OmniScan MX2 group setup wizards, and setup and configuration of the UT parameters.
Вебинар – Ультразвуковой контроль фазированными решетками с использованием OmniScan MX2 - Часть 2Narration Language:English
This webinar is intended to demonstrate use of common crack sizing techniques and best practices for optimizing the OmniScan MX2 for manual and semi-automated crack detection and sizing.
Вебинар – Применение фазированных решеток – Измерение трещин с помощью OmniScan MX2Narration Language:English
Olympus is proud to present the latest software release for the OmniScan family of products: MXU V4.1.
This Webinar will include a presentation explaining the various new features and also include live demonstrations of data analysis using OmniPC and setup and acquisition using the OmniScan MX2.
Have a question about a product or solution featured in this video?