Evident LogoOlympus Logo

Total Focusing Method Webinar Series

Olympus OmniScan X3 Phased Array Flaw Detector

Total Focusing Method Webinar Series

Featuring the OmniScan™ X3 Phased Array Flaw Detector with TFM

Starting with an introduction to the OmniScan X3 flaw detector and its new FMC/TFM capabilities, this series of 5 webinars provides useful information on various topics related to total focusing method (TFM) imaging. Advanced inspection tools that enable more efficient, effective, and code-compliant TFM inspections will be presented throughout the sessions.

Webinar Series Descriptions


Confidence You Can See—Introducing the OmniScan™ X3 PAUT/TFM Flaw Detector

Get an overview, including a live demo, of the new OmniScan flaw detector’s innovative TFM imaging, improved phased array inspection, streamlined TOFD menu, and other enhancements. The session is approximately 30 minutes.

Presenter: Tommy Bourgelas, Senior Product Manager—OmniScan Product Line

Date: January 22, 2020

Watch On-Demand

The Basics of the Total Focusing Method (TFM)
.

Learn the basic principles of the total focusing method (TFM) and full matrix capture (FMC), including the advantages and limitations. New concepts such as wave sets, amplitude fidelity, and TFM grid resolution will also be covered, all in 30 minutes.

Presenter: Daly Souissi, Global Markets Manager
.

Date: February 12, 2020

Watch On-Demand

Acoustic Influence Map (AIM)—The Modeling Tool for Your TFM Inspection

See how the AIM modeling tool and its Sensitivity Index feature show users which TFM wave sets and probe will be most effective for a given application.

.

Presenter: Emilie Peloquin, Global Advanced Product Support Manager

Date: March 4, 2020

Watch On-Demand


Total Focusing Method (TFM) vs Phased Array (PAUT)—When to Use Each Method

Know when to choose TFM over PAUT, and vice versa. This webinar will cover the advantages and limitations of each method for specific applications.
.

Presenter:Stephan Couture, Global Advanced Product Support Specialist

Date: March 25, 2020

Watch On-Demand

Ensuring Code Compliance While Using the Total Focusing Method
.

Learn about the current codes and standards that apply to FMC and TFM and understand the reasons behind these new requirements. Find out what tools are available to make code compliance easier.

Presenter: Daly Souissi, Global Markets Manager

Date: April 15, 2020

 
Watch On-Demand


Presenter Bios

Presenter Tommy Bourgelas

Tommy Bourgelas, Senior Product Manager—OmniScan Product Line
Olympus Scientific Solutions Americas (OSSA)
For over 19 years, Tommy Bourgelas has worked for Olympus NDT, formerly R/D Tech, an NDT equipment manufacturer and subsidiary of OSSA. Prior to his current position as Senior Product Manager for the OmniScan product line, he was the Product Manager for other in-service portable NDT product lines (OmniScan ECA, MS-5800, NORTEC™, and BondMaster™). Throughout his career Tommy has contributed to the development of probes and applications as well as the improvement of existing products. He has also led numerous training sessions on NDT-related technologies.

Presenter Emilie Peloquin

Emilie Peloquin, Global Advanced Product Support Manager
Olympus Scientific Solutions Americas (OSSA)
Emilie Peloquin has been in the welding/NDT industry since 2009. She holds an associate degree in Applied Science and is trained in accordance to SNT-TC-1A for Level II on UT, ET, RT, MT, PT, and VT. Emilie joined Olympus in 2014 and has held positions ranging from technical support to product management, focusing on ultrasonic, phased array, and other advanced inspection technologies. As a Global Advanced Product Support Manager, she and her team are involved in business and product development, supporting a variety of applications across numerous industries.

Presenter Daly Souissi

Daly Souissi, Global Markets Manager
Olympus Scientific Solutions Americas (OSSA)
Daly is an NDT expert specialized in advanced applications and training. He holds a bachelor’s degree in engineering and a Master of Science degree in Applied Science and is certified UT and PAUT level III. With a broad range of international experience, he has participated in numerous inspection projects in the nuclear, oil & gas, and steel structure industries. Daly joined Olympus in 2019 as Global Markets Manager. He is involved in business development and NDT product and solutions global support.

Presenter Stephan Couture

Stephan Couture, Global Advanced Product Support Specialist
Olympus Scientific Solutions Americas (OSSA)
Stephan worked with Olympus at the product development and as a Product Specialist for 9 years. In 2017, he transitioned to work in the inspection world to gather more applicative knowledge with the boots on the ground. In 2019, Stephan rejoined Olympus as a leader for Global Advanced Product Application. Stephan is now supporting worldwide on applications, trainings, and industry projects as an Ultrasonic advanced products specialist.

Related Products:

OmniScan X3

The OmniScan X3 flaw detector is a complete phased array toolbox. Innovative TFM delivers outstanding images that help inspectors identify flaws with confidence while powerful software features and simple workflows help you get to work fast.
Desculpe, esta página não está disponível no seu país
Diga-nos o que você está procurando preenchendo o formulário abaixo.
Desculpe, esta página não está disponível no seu país