The HS10-X01 is a mouse-type scanner designed for encoding phased array scans in laboratory or production environments.
This scanner offers an efficient one-hand encoded manual-scan solution. The encoder wheels are specially made not to slip on wet surfaces.
The yoke of the HS10-X01 is easy to set up on a IHC-type wedge by using standard attachment holes. The spring loaded system is optimized to offer the lowest clearance possible. The yoke is also attached to the scanner using a quick-connect system in order to have the probe parallel or at a 90° skew according to the weld.
Features
Encoded linear-scan (one axis) for phased array
2 rubber wheels in contact with surface for maximum adherence
Easily clipped and spring-loaded yoke can be positioned with 90º skew
Encoder resolution: 5 steps/mm
Durable aluminum casing
Compatible with the OmniScan, the TomoScan FOCUS LT™ (with optional adaptor), and other instruments using the appropriate encoder cable (not included)
Standard inclusions
OmniScan-compatible 2.5 m encoder cable
1 PA 40 mm × 55 mm yoke
Carrying case
Note: Probes and wedges are not included with the scanner.
Options
TomoScan FOCUS LT Encoder Cable Adaptor
Optional Yoke
PA 55 mm × 55 mm yoke for SA4, and SA5 type wedges
Indexer Clicker
Clicker to send the indexing signal needed for 2-axis inspections with only one encoder. The kit also includes a 3-to-1 splitter cable (with DE-15 connectors) enabling connection of the encoder, the Clicker, and a digital input source (DIN) to the OmniScan.
Encoder cable
OmniScan-compatible 5 m encoder cable
Sorry, this page is not available in your country
Let us know what you're looking for by filling out the form below.