Evident LogoOlympus Logo
Ресурсы
Application Notes
Назад к ресурсам

Measuring the Profile of a Bonding Wire Ball


TOP image

Application: Measuring the Profile of Balls on IC Bonding Wire

Integrated circuits (IC) must have the proper electrical conductivity to work correctly. To achieve the proper conductivity, the integrated circuit chip and substrate must be securely bonded together. During the bonding process, the end of a wire made of a conductive metal, such as gold, is heated so that a ball forms at the end of the wire. The ball is then placed where the chip and substrate meet. Heat causes the ball to melt, fusing the chip and the substrate.

To help ensure that the bonding process works correctly, the profile of the ball at the end of the bonding wire is measured. However, this procedure is challenging since the system used to perform the inspection must be able to measure small, complex shapes.

Wire bonding

Olympus’ Solution: Measurement Using the OLS5000 Microscope

Measurement of minute, complex shaped objects is facilitated by the Olympus LEXT OLS5000 3D laser scanning microscope’s advanced features:

  1. To accurately measure the ball profile, the microscope uses dedicated objective lenses that are designed to work with its 405 nm wavelength laser to minimize aberration. These features enable the microscope to make minute measurements of objects with complex shapes.

    3D image
    3D image

    Step measurement using a profile
    Step measurement using a profile
     
  2. Unlike a stylus, which is a contact-based device, the OLS5000 microscope uses a noncontact laser scanner for its measurements. This system yields accurate data without damaging the sample. 
  3. The microscope’s 4K scanning technology enables you to obtain data for samples that have a steep inclination, such as a ball, with no measurement noise. With white-light interferometers, another noncontact device; the congestion of interference patterns prevents accurate measurement of steeply inclined surfaces.
    3D image using a white-light interferometer
    3D image using a white-light interferometer

    With the white-light interferometer no data can be acquired for the complex-shaped vertex and edge portions.
    With the white-light interferometer no data can be acquired for the complex-shaped vertex and edge portions.

    3D image using the LEXT OLS5000 microscope
    3D image using the LEXT OLS5000 microscope

    Data can be acquired for both complex-shaped vertex and edge portions
    Data can be acquired for both complex-shaped vertex and edge portions
Olympus IMS

Продукты, используемые для этой цели

The LEXT™ OLS5100 laser scanning microscope combines exceptional accuracy and optical performance with smart tools that make the system easy to use. The tasks of precisely measuring shape and surface roughness at the submicron level are fast and efficient, simplifying your workflow and delivering high-quality data you can trust.

К сожалению, эта страница недоступна в вашей стране.
Let us know what you're looking for by filling out the form below.
К сожалению, эта страница недоступна в вашей стране.