The near-field probes offer excellent detection of internal corrosion, erosion, and axial cracking and return high-quality, amplitude-based signals that enable fast and simple data analysis. There is no need for a reference probe or extension. These probes are ideal for fin-fan carbon steel tube inspection.
Features
- Ideal for carbon steel fin-fan tubes.
- Excellent detection of internal corrosion, erosion, and axial cracking.
(Not recommended for detecting OD defects.)
- No need for a reference probe or extension.
- High-quality, amplitude-based signals.
- Fast and simple data analysis.
Faster is better - Available for shortest delivery times
The probes listed below are regularly stocked for quick delivery. If the probe you need is not indicated, consult the "Alternate probe diameter" column in the diameter selection section to find an alternate probe diameter.
|
Part ID
|
Item Number
|
Diameter
|
Center Frequency (Hz)
|
|
mm
|
in.
|
|
TRD-160-300-N30
|
U8280227
|
16
|
0.630
|
300
|
|
TRD-170-300-N30
|
U8280086
|
17
|
0.669
|
300
|
|
TRD-180-300-N30
|
U8280112
|
18
|
0.709
|
300
|
|
TRD-240-300-N30
|
U8280377
|
22
|
0.866
|
300
|
|
TRD-280-300-N30
|
U8280241
|
28
|
1.102
|
300
|
Standard/Custom Probes (Made to Order)
Use the nomenclature and the chart below to configure your part number.
|
Probe Type
|
Probe Diameter
(use mm in part ID)
|
Center Frequency
|
Cable Length
|
|
mm
|
in.
|
| TRD: Near field probe
| Standard
11 mm to 31 mm
by 1 mm
Custom
32 mm to 100 mm **
by 1 mm
| Standard
0.433 in. to 1.220 in.
by 0.039 in.
Custom
1.260 in. to 3.937 in. **
by 0.039 in.
|
300 (Standard)
|
20 m (65 ft)
30 m (100 ft)
|
|
** Probes with a diameter greater than 31.0 mm (1.220 in.) have a lightweight design and probe body made of plastic and two stainless sleeves (see picture above).
|
