Evident LogoOlympus Logo
Wsparcie Klienta

IPLEX GX/GT Software Update - v1.20

IPLEX GX/GT Software Update - v1.20

This program updates the IPLEX GX/GT software to v1.20.

Supported Software Version

v1.00 / v1.10 / v1.11

New Features and Changes of this Program

Below is the new feature and changes of this program:

  1. Supports stereo measurement when using Ultraviolet or Infrared light source
  2. Function added to record still image directly without freezing the screen

Before Update

Please make sure you have the following to successfully perform the software update:

  • IPLEX GX/GT videoscope with AC adapter
  • SDHC memory card (Note: USB drive can NOT be used for this update)
  • Computer with SDHC memory card port or SDHC to USB adapter

Download Update Program

  1. Visit the Olympus website below:
    https://www.olympus-ims.com/en/service-and-support/downloads
  2. Click IPLEX > IPLEX GX/GT Software Update – v1.20
  3. Click [Download] located in the bottom of the page
  4. Enter the requested information in the displayed entry form
  5. Click [Start Download] to start download of the program
  6. When [Download the File] dialogue appears, click [Save] button to save the file on Desktop or any given location on computer
  7. Decompress the ZIP file after download

Update IPLEX GX/GT Software to v1.20

Update IPLEX GX/GT Software to v1.20

  1. Connect the SDHC memory card to a computer
  2. In the root directory, create a new folder called “UPDATE”
  3. Copy ALL of the unzipped files into the folder called “UPDATE”
  4. Connect the IPLEX GX/GT to AC adapter
  5. While the videoscope is powered OFF, insert the SDHC memory card from step 1 above into the videoscope
  6. Power ON the videoscope
    Attention: Videoscope shall have continuous power from AC power to prevent accidental shut down during the update
  7. Update process will start automatically
  8. When the message “UPDATED!!” appears at the bottom of the blue startup screen, power OFF the videoscope
  9. Using your computer, Delete the folder named “UPDATE” on the SDHC memory using the computer to prevent automatic activation again.
  10. Go to Menu > System Setup > Version to confirm that software version has been successfully installed

JęzykWersja
1.20

Have a question about a product or solution featured in this file?

Contact a Sales Rep

Sorry, this page is not available in your country
Let us know what you're looking for by filling out the form below.
Sorry, this page is not available in your country