IPLEX GX/GT Software Update

This program updates the IPLEX GX/GT software to v1.20.

v1.00 / v1.10 / v1.11

Below is the new feature and changes of this program:

Please make sure you have the following to successfully perform the software update:

Visit the Olympus website below:
https://www.olympus-ims.com/en/service-and-support/downloads
Click IPLEX > IPLEX GX/GT Software Update – v1.20
Click [Download] located in the bottom of the page
Enter the requested information in the displayed entry form
Click [Start Download] to start download of the program
When [Download the File] dialogue appears, click [Save] button to save the file on Desktop or any given location on computer
Decompress the ZIP file after download

Connect the SDHC memory card to a computer
In the root directory, create a new folder called “UPDATE”
Copy ALL of the unzipped files into the folder called “UPDATE”
Connect the IPLEX GX/GT to AC adapter
While the videoscope is powered OFF, insert the SDHC memory card from step 1 above into the videoscope
Power ON the videoscope
Attention: Videoscope shall have continuous power from AC power to prevent accidental shut down during the update
Update process will start automatically
When the message “UPDATED!!” appears at the bottom of the blue startup screen, power OFF the videoscope
Using your computer, Delete the folder named “UPDATE” on the SDHC memory using the computer to prevent automatic activation again.
Go to Menu > System Setup > Version to confirm that software version has been successfully installed