DC Series Transducers Provide a Complete Corrosion Monitoring Toolbox

Versatile transducers go beyond corrosion monitoring to include pipe weld testing

WALTHAM, Mass., (March 30, 2021) Olympus’ new DC series (DC1–DC5) dual element transducers provide inspectors with a complete corrosion monitoring toolbox for pipeline and tank integrity. Optimized for corrosion and thin materials, the transducers work with the NDT instruments and ultrasonic inspection procedures used in the oil gas, energy and mining industries.

Depending on the application, any one or a combination of these five transducers offers improved corrosion monitoring and defect sizing. As field inspections change, inspectors can benefit from having the complete set of transducers with a total combined thickness range of 0–2 in. (0–50.8 mm), as well as the extra pipe weld inspection tool with the DC3 model.

Cleaner Signals

All models provide a cleaner signal than single element transducers and offer less ring down than comparable models—helpful for resolving smaller defects, inspecting close to the surface and differentiating between two indications.

Compact

Inspect hard-to-access areas such as boiler tubes thanks to low-profile designs and small tip diameters (DC1 and DC2 models), as well as integrated wedges (DC3).

Versatile

The DC3 model takes the series beyond corrosion monitoring and thickness measurement to include pipe weld testing and other thin-wall material inspections. Fast and reliable, the transducer performs high-speed manual weld inspections similar to comparable models.

Cost-Effective

Featuring a thick-walled, wear-resistant housing (DC2 model) and replaceable wedges (DC4 and DC5), the transducers are built to last. A heat-resistant delay line up to 150 °C (300 °F) on the DC1 and DC2 models helps reduce maintenance time for elevated-temperature pipe and tank inspections.

Efficient

Pairing the transducers with the Olympus EPOCH™ 650 or 6LT flaw detectors or the 38DL PLUS™ thickness gauge* enables accurate, efficient corrosion mapping.

For more information about the DC series dual element transducers and other industrial solutions, visit Olympus-IMS.com.

^*Due to roof angles, manual V-Path Correction may be required for DC1, DC2, DC4 and DC5.

About Olympus

Olympus is passionate about creating customer-driven solutions for the medical, life sciences and industrial equipment industries. For more than 100 years, Olympus has focused on making people’s lives healthier, safer and more fulfilling by helping to detect, prevent and treat disease; furthering scientific research; and ensuring public safety.

Olympus’ Industrial Solutions range from industrial microscopes and videoscopes to nondestructive testing technology and X-ray analyzers. These products are widely used for quality control, inspection and measurement applications. Serving customers in fields such as manufacturing, maintenance, and environment and natural resources, Olympus technology contributes to the quality of products and adds to the safety of industrial infrastructure and facilities. For more information, visit Olympus-IMS.com.

Media Contact:
Hilary Banda
(781) 419-3624
Hilary.Banda@olympus.com

Olympus, the Olympus logo, EPOCH and 38DL PLUS are trademarks of Olympus Corporation or its subsidiaries.