Olympus Logo

Contatti Contatti

  • Prodotti▾
    • Soluzioni NDT▾
      • Rilevatore di difetti▾
        • Rilevatori di difetti ad ultrasuoni portatili
        • Strumenti ad ultrasuoni phased array
        • Prodotti eddy current
        • Eddy Current Array Products
        • Controllo di materiali compositi
      • Misuratori di spessore portatili▾
        • 27MG
        • 45MG
        • 38DL PLUS
        • Magna-Mike 8600
        • 35RDC
        • Trasduttori ed accessori
      • Sonde e trasduttori▾
        • Trasduttore a singolo elemento e doppio elemento
        • Eddy Current Probes
        • Probes for Tube Inspection
        • Sonde phased array
        • BondMaster Probes
      • Sistemi di ispezione automatizzati▾
        • Wheel Inspection System
        • Soluzioni per l’ispezione di barre
        • Soluzioni per l’ispezione di tubi
        • Friction Stir Weld Inspection System
      • NDT Systems Instrumentation ▾
        • FOCUS PX / PC / SDK
        • QuickScan
      • Scanner industriali▾
        • Weld Inspection Scanners
        • Corrosion Inspection Scanners
        • Scanner per ispezione di componenti aerospaziali e pale eoliche
        • Scanner Accessories
      • Olympus Scientific Cloud
    • Analizzatori XRF e XRD▾
      • Analizzatori XRF portatili▾
        • Vanta
        • Vanta Element
        • DELTA Professional
      • Analizzatori XRF compatti e portatili▾
        • Vanta
        • Vanta Element
        • GoldXpert
        • Xpert for Consumer/RoHS
      • Analizzatori XRF per linee di produzione▾
        • FOX-IQ
      • Analizzatori XRD▾
        • Sistema XRD portatile TERRA
        • Sistema XRD da banco BTX
      • Soluzioni OEM▾
        • X-STREAM
      • Soluzioni per applicazioni principali
      • Olympus Scientific Cloud
    • Soluzioni per Microscopia▾
      • Scanning Probe Microscopy▾
        • OLS4500
      • Microscopi confocali laser▾
        • OLS5100
      • Microscopi digitali
      • Microscopi di misura▾
        • STM7
        • STM7-BSW
      • Microscopio per pulizia tecnica▾
        • OLYMPUS CIX100
      • Microscopi ottici▾
        • Microscopi verticali
        • Microscopi invertiti
        • Modular Microscopes
      • Microscopi per l'ispezione dei display a semiconduttori e schermo piatto▾
        • MX63 / MX63L
        • AL120
        • AL120-12
      • Microscopi stereoscopici▾
        • SZX16
        • SZX10
        • SZX7
        • SZ61/SZ51
      • Fotocamere digitali▾
        • DP74
        • SC180
        • UC90
        • DP27
        • SC50
        • LC30
        • DP22
        • XM10
        • XM10IR
      • Software di analisi delle immagini▾
        • OLYMPUS Stream
      • Micro Spectrophotometer▾
        • USPM-RU-W
        • USPM-RU III
      • Obiettivi▾
        • MPLAPON
        • MPLAPON-Oil
        • MPLN
        • MPLN-BD
        • MPLFLN
        • MPLFLN-BD
        • MPLFLN-BDP
        • LMPLFLN
        • LMPLFLN-BD
        • SLMPLN
        • LCPLFLN-LCD
        • LMPLN-IR/LCPLN-IR
        • White Light Interferometry Objective
        • Micrometer
      • Componenti di microscopi OEM per l'integrazione▾
        • Equipment Integration Solutions
        • Objective Lenses
        • Optical Microscope Frames
        • Super Wide Tube Lens
        • Optical Microscope Modules
        • Modular Microscope Assemblies
      • Microscope FAQ
    • Videoscopi, Boroscopi▾
      • Videoscopi industriali▾
        • IPLEX NX
        • IPLEX GAir
        • IPLEX GX/GT
        • IPLEX G Lite
        • IPLEX TX
        • Soluzione IPLEX con lungo endoscopio
      • Fibroscopi industriali▾
        • Fibroscopi di piccolo diametro
      • Boroscopi rigidi industriali▾
        • Boroscopi rigidi standard
        • Boroscopi a prisma mobile
        • Boroscopi a prisma mobile con zoom
        • MK Mini-scope modulare
        • Boroscopi per motori aeronautici
      • Fonte di luce
      • Software InHelp▾
        • InHelp
  • Settori industriali
  • Blog
  • Risorse
  • Assistenza clienti▾
    • Contatti
    • Olympus Scientific Cloud
    • Accademia di Formazione
    • Customer Service
    • Centri di Assistenza
    • Scarica Software
    • Product Information
    • Prodotti fuori produzione e obsoleti
    • Product Service Termination List
    • Certificazioni ISO
    • MSDS Datasheets
    • Terms and Conditions of Supply
    • CIC
    • Olympus Technolab
    • Microscope Classroom
    • Compliance and Ethics at Olympus
    • Same Day Shipping Program
    • Custom Financing Solutions
  • Rentals
  • Shop
  • Ricerca
  • My Account
    • IMS Log in
    • IMS Registration
    • My Apps
    • My Devices
    • My Data
    • OSC Marketplace
    • My Organization
    • OSC Log in
    • OSC Log in
    • Log Out
    • Log Out
Soluzioni industriali

Soluzioni per Microscopia
Optical Microscope Modules

ContattiContatti
Richiedi un preventivoRichiedi un preventivo
Loading...
  • Overview
  • Resources

Overview

Because our systems are modular, it's easy for equipment designers to pick and choose the components and objective lenses that meet their system requirements—optically, mechanically, and electronically. Designers can choose to use off-the-shelf components—like tube lenses, illuminators, nosepieces, and autofocus units— in addition to objective lenses. 

Get in touch

Tube Lens

U-TLU

Ideal when observation through oculars is not required, the tube lens unit is designed for use with an imaging sensor. We also offer a model designed to transmit near-IR wavelengths. C-mount and other adaptors enable you to add a digital camera to the tube lens.

SWTLU-C

The dedicated super-wide tube lens takes full advantage of Olympus objectives’ 26.5 mm field of view, increasing the overall image field of view and the amount of data acquired with each image.

Tube Lens

Nosepieces

Our revolving nosepieces can be used with either brightfield or brightfield/darkfield objectives and have a slider slot for DIC observation.  Both manual and motorized nosepieces are available that accommodate from four to seven objectives. If you’re integrating software, coded nosepieces are available so that the software can read the magnification setting on the nosepiece. We also offer specially designed cleanroom-compatible motorized nosepieces for semiconductor applications.

NosepiecesNosepieces

C-Mounts and Video Mounts

We provide a variety of C-mounts and video ports to interface with imaging sensors, including 1x, 0.63x, 0.5x, 0.35x, and 0.25x C-mounts and bayonet, T-mounts, and F-mounts.

C-Mounts & Video Mounts

Observation Tube

Observation Tube

If you need eyepieces to maximize the user's interaction with the microscope image, binocular and trinocular observation tubes are available. Options include erect tubes, tilting tubes, and tubes with a wide field of view (up to 26 mm).

Autofocus

The active laser autofocus improves the accuracy, repeatability, and speed of inspections. Our autofocus unit has a multi-spot array that substantially increases stability by eliminating the effects of vertical topography on the sample.

Autofocus

Illuminators

Our universal illuminator is built to suit life science, industrial, and materials science equipment. It includes multiple positions for mirror cubes and is ideal for fluorescence or laser integration. Compact brightfield illuminators include filter slots for Nomarski and polarized light, and motorized illuminators are available that enable you to fully control the mirror cube position, aperture stop, and illumination intensity.

IlluminatorsIlluminators

Light Sources

Our microscope frames are coupled with LED light sources but can also be fitted with a collimating adaptor to introduce a high-intensity halogen fiber or LED fiber options.

Light Sources

Magnification Changers

Magnification Changers

Magnification changers provide incremental magnification that can be beneficial when an imaging sensor requires a specific field of view. Magnification changer components are placed before the tube lens within the infinity space of the optical system.

The U-CA changer provides magnification increments of 1.25x, 1.6x, and 2x, and the U-ECA provides 2x magnification. Both can be used on upright or inverted microscopes. A coded magnification changer, the IX3-CAS, is also available.

Camera Ports

Additional camera ports can be used within the system’s infinity space to add an input or output detector.

Condensers

Condensers

We offer condensers for transmitted light on both upright and inverted microscopes. The universal condenser enables you to perform many illumination techniques on one microscope. Phase contrast, darkfield, and long working distance condensers are available for various applications.

Digital Cameras

Cameras are available on request; please contact your local Olympus Components representative. 

Need assistance?

Get in touch

Resources

Cataloghi

OEM Microscope Components Solutions
Microscope Components Guide
Home/ Prodotti/ Componenti di microscopi OEM per l'integrazione/ Optical Microscope Modules
Sorry, this page is not available in your country

Let us know what you're looking for by filling out the form below.

Contatti

Please, choose division
Iscrivendosi alla e-newsletter si riceveranno informazioni su offerte speciali, sugli ultimi prodotti o le nuove applicazioni.

Stampa

Copyright OLYMPUS CORPORATION, All rights reserved.

Globale | Condizioni d'uso | Informativa sulla privacy | Cookies | Chi siamo | Careers | Careers | Mappa del sito

Copyright OLYMPUS CORPORATION, All rights reserved.

Globale | Condizioni d'uso | Informativa sulla privacy | Cookies | Chi siamo | Imprint | Careers | Careers | Mappa del sito

  • Youtube
  • LinkedIn
  • Twitter
  • Facebook

Questo sito utilizza cookie per migliorare le performance, analizzare il traffico e misurare l’efficacia delle pubblicità. Se non modifichi le impostazioni internet, i cookie continueranno a essere usati in questo sito internet. Per maggiori informazioni sulle modalità d’uso dei cookie per questo sito internet e sulle modalità di restrizione dell’uso dei cookie, riferirsi alla nostra politica sui cookie.

OK
Cancel